2716101

https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: blue, mounting type: NS 35/7,5, NS 35/15 Why buy this product  The first initiator can also be connected to this three-conductor feed-through terminal block  The positive and negative potential can be supplied to the insertion bridges via this power terminal block Key Commercial Data Packing unit 1 STK GTIN GTIN 4017918061814 Weight per Piece (excluding packing) 20.130 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 3 Number of connections 6 Nominal cross section 2.5 mm² Color blue Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 4 kV Degree of pollution 3 04/26/2018   Page 1 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Technical data General Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels) Connection in acc. with standard IEC 60947-7-1 Nominal current IN 24 A Maximum load current 30 A (with 4 mm² conductor cross section) Nominal voltage UN 250 V Open side panel No Shock protection test specification IEC 60529:2001-02 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 4.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.5 kV Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 2.5 mm² / 0.7 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Requirement, voltage drop 2nd level ≤ 3.2 mV Result of temperature-rise test Test passed 04/26/2018   Page 2 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Technical data General Short circuit stability result Test passed Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec.; UL 746 B) 125 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Dimensions Width 6.2 mm Length 72.5 mm Height NS 35/7,5 54.5 mm Height NS 35/15 62 mm Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² 04/26/2018   Page 3 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Stripping length 8 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram 1 = fixed bridge 2 = insertion bridge 3 = partition plate Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141128 eCl@ss 7.0 27141128 04/26/2018   Page 4 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Classifications eCl@ss eCl@ss 8.0 27141128 eCl@ss 9.0 27141128 ETIM ETIM 2.0 EC000900 ETIM 3.0 EC000900 ETIM 4.0 EC000900 ETIM 5.0 EC000900 ETIM 6.0 EC000900 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/     mm²/AWG/kcmil 28-14 Nominal current IN 15 A Nominal voltage UN 300 V  13631 04/26/2018   Page 5 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 30-14 30-14 30-14 Nominal current IN 15 A 15 A 10 A Nominal voltage UN 300 V 150 V 300 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 30-14 30-14 30-14 Nominal current IN 15 A 15 A 10 A Nominal voltage UN 300 V 150 V 300 V  FILE E 60425  FILE E 60425 EAC      7500651.22.01.00246 EAC      EAC-Zulassung cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Bridge Fixed bridge - FB-150 METER - 0201595 Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long     04/26/2018   Page 6 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     04/26/2018   Page 7 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/26/2018   Page 8 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     04/26/2018   Page 9 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     04/26/2018   Page 10 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     Insertion bridge Insertion bridge - EB 80- DIK RD - 2715953 Insertion bridge, pitch: 6.2 mm, number of positions: 80, color: red     04/26/2018   Page 11 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Insertion bridge - EB 80- DIK BU - 2715940 Insertion bridge, pitch: 6.2 mm, number of positions: 80, color: blue     Insertion bridge - EB 10- DIK RD - 2716774 Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: red     Insertion bridge - EB 10- DIK BU - 2716680 Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: blue     Insertion bridge - EB 10- DIK GY - 2715937 Insertion bridge, pitch: 6.15 mm, number of positions: 10, color: gray     Insertion bridge - EB 80- DIK WH - 2715788 Insertion bridge, pitch: 6.15 mm, number of positions: 80, color: white     04/26/2018   Page 12 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Insertion bridge - EB 5- DIK BU - 2716677 Insertion bridge, pitch: 6.15 mm, number of positions: 5, color: blue     Insertion bridge - EB 4- DIK BU - 2716664 Insertion bridge, pitch: 6.15 mm, number of positions: 4, color: blue     Insertion bridge - EB 3- DIK BU - 2716651 Insertion bridge, pitch: 6.15 mm, number of positions: 3, color: blue     Insertion bridge - EB 2- DIK BU - 2716648 Insertion bridge, pitch: 6.15 mm, number of positions: 2, color: blue     Insertion bridge - EB 5- DIK RD - 2716761 Insertion bridge, pitch: 6.15 mm, number of positions: 5, color: red     04/26/2018   Page 13 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Insertion bridge - EB 4- DIK RD - 2716758 Insertion bridge, pitch: 6.15 mm, number of positions: 4, color: red     Insertion bridge - EB 3- DIK RD - 2716745 Insertion bridge, pitch: 6.15 mm, number of positions: 3, color: red     Insertion bridge - EB 2- DIK RD - 2716693 Insertion bridge, pitch: 6.15 mm, number of positions: 2, color: red     Labeled terminal marker Marker card - SK 6,2/3,8:FORTL.ZAHLEN - 0804374 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, mounting type: adhesive, for terminal block width: 6.2 mm, lettering field size: 6.2 x 3.8 mm     Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     04/26/2018   Page 14 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     04/26/2018   Page 15 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm     Mounting material Screw - ZS-6 - 0201605 Screw     Partition plate Partition plate - ATP-DIKD 1,5 - 1413285 Partition plate, length: 83 mm, width: 2 mm, height: 60 mm, color: gray     Separating plate - D-DEK 1,5 GN - 2716949 Cover for setting the end of a terminal row, color: green     04/26/2018   Page 16 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Screw bridge Fixed bridge - FBI 100- 6 - 0201650 Fixed bridge, pitch: 6 mm, number of positions: 100, color: silver     Fixed bridge - FBI 10- 6 - 0203250 Fixed bridge, pitch: 6 mm, number of positions: 10, color: silver     Fixed bridge - FBI 20- 6 - 0201867 Fixed bridge, pitch: 6 mm, number of positions: 20, color: silver     Terminal marking Marker card - SBS 6:UNBEDRUCKT - 1007222 Marker card, Card, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm     04/26/2018   Page 17 / 18 https://www.phoenixcontact.com/us/products/2716101 Sensor/actuator terminal block - DIKD 1,5 BU - 2716101 Accessories Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/26/2018   Page 18 / 18