0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
2717029

2717029

  • 厂商:

    PHOENIX(菲尼克斯)

  • 封装:

    -

  • 描述:

    CONNTERMBLKFEEDTHRU14-30AWG

  • 数据手册
  • 价格&库存
2717029 数据手册
https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator terminal block, Cross section:  0.2 mm² - 4 mm², AWG: 24 - 12, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features  Same shape as DIK ... three-level initiator terminal blocks  Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring  The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks  The upper level contains the feed-through connections for the signal cable which can be labeled  Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned  Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green  Alternate wiring of an actuator followed by an initiator is easy  The middle level supplies the connected actuators with power Key commercial data Packing unit 1 PCE GTIN Weight per Piece (excluding packing) 16.69 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 3 Number of connections 4 Color gray 12/4/13   Page 1 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Technical data General Insulating material PA Inflammability class according to UL 94 V2 Rated surge voltage 4 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 24 A Nominal voltage UN 250 V (the voltage is determined by the light indicator.) Open side panel nein Dimensions Width 6.2 mm Length 61.5 mm Height NS 35/7,5 54.5 mm Height NS 35/15 62 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. 12/4/13   Page 2 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Technical data Connection data Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Connection method Screw connection Stripping length 8 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141128 eCl@ss 7.0 27141128 eCl@ss 8.0 27141128 ETIM ETIM 2.0 EC000900 ETIM 3.0 EC000900 ETIM 4.0 EC000900 ETIM 5.0 EC000900 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 12/4/13   Page 3 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Approvals Approvals CSA / UL Recognized / cUL Recognized / GOST / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 28-14 Nominal current IN 15 A Nominal voltage UN 300 V UL Recognized      mm²/AWG/kcmil 30-14 Nominal current IN 15 A Nominal voltage UN 300 V cUL Recognized      mm²/AWG/kcmil 30-14 Nominal current IN 15 A Nominal voltage UN 300 V GOST  12/4/13   Page 4 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Approvals GOST  cULus Recognized  Accessories Accessories Bridge Insertion bridge - EB 80- DIK RD - 2715953 Insertion bridge, Number of positions: 80, Color: red     Insertion bridge - EB 80- DIK BU - 2715940 Insertion bridge, Number of positions: 80, Color: blue     Insertion bridge - EB 10- DIK RD - 2716774 Insertion bridge, Number of positions: 10, Color: red     12/4/13   Page 5 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories Insertion bridge - EB 10- DIK BU - 2716680 Insertion bridge, Number of positions: 10, Color: blue     Insertion bridge - EB 10- DIK GY - 2715937 Insertion bridge, Number of positions: 10, Color: gray     Insertion bridge - EB 80- DIK WH - 2715788 Insertion bridge, Number of positions: 80, Color: white     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     12/4/13   Page 6 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     Labeled terminal marker Marker cards - SK 6,2/3,8:FORTL.ZAHLEN - 0804374 Marker cards, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, For terminal block width: 6.2 mm, Lettering field: 6.2 x 3.8 mm     Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     12/4/13   Page 7 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     12/4/13   Page 8 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     12/4/13   Page 9 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     12/4/13   Page 10 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     12/4/13   Page 11 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Partition plate Partition plate - ATP-DIK 1,5 - 1413272 Partition plate, Length: 65.3 mm, Width: 2 mm, Height: 60 mm, Color: gray     Terminal marking Marker cards - SBS 6:UNBEDRUCKT - 1007222 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     12/4/13   Page 12 / 13 https://www.phoenixcontact.com/us/products/2717029 Sensor/actuator terminal block - DOK 1,5-LA 24RD/O-M - 2717029 Accessories Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/4/13   Page 13 / 13
2717029 价格&库存

很抱歉,暂时无法提供与“2717029”相匹配的价格&库存,您可以联系我们找货

免费人工找货
2717029
  •  国内价格 香港价格
  • 1+145.990331+18.16697

库存:0