https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Motor terminal block, four-level, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, connection method: screw
connection, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Why buy this product
This terminal block has 2 feed-through levels and 2 busbar levels
It is used for programmable or self-monitoring initiators which are additionally controlled via the second feed-through level
Key Commercial Data
Packing unit
50 STK
GTIN
GTIN
4017918062279
Weight per Piece (excluding packing)
27.150 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
4
Number of connections
7
Nominal cross section
2.5 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V2
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
12/28/2016 Page 1 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Technical data
General
Nominal current IN
24 A
Maximum load current
26 A (with a 2.5 mm² conductor cross section)
Nominal voltage UN
400 V (when using EB insertion bridges, the nominal voltage is reduced
to 250 V.)
Open side panel
No
Dimensions
Width
6.2 mm
Length
82.5 mm
Height NS 35/7,5
70 mm
Height NS 35/15
77.5 mm
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Stripping length
8 mm
Internal cylindrical gage
A3
12/28/2016 Page 2 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Technical data
Connection data
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1/IEC 60947-7-2
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Circuit
diagram
Circuit diagram
1 = insertion bridge
2 = fixed bridge
12/28/2016 Page 3 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141118
eCl@ss 6.0
27141128
eCl@ss 7.0
27141128
eCl@ss 8.0
27141128
eCl@ss 9.0
27141128
ETIM
ETIM 2.0
EC000900
ETIM 3.0
EC000900
ETIM 4.0
EC000900
ETIM 5.0
EC000900
ETIM 6.0
EC000900
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services/testingand-certification/certified-product-listing/
mm²/AWG/kcmil
28-14
Nominal current IN
15 A
13631
12/28/2016 Page 4 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Approvals
Nominal voltage UN
300 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
30-14
30-14
30-14
Nominal current IN
15 A
15 A
10 A
Nominal voltage UN
300 V
150 V
300 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
30-14
30-14
30-14
Nominal current IN
15 A
15 A
10 A
Nominal voltage UN
300 V
150 V
300 V
FILE E 60425
FILE E 60425
EAC
7500651.22.01.00246
EAC
EAC-Zulassung
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Bridge
Fixed bridge - FB-150 METER - 0201595
Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long
12/28/2016 Page 5 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
12/28/2016 Page 6 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
12/28/2016 Page 7 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm,
length 2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
12/28/2016 Page 8 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
12/28/2016 Page 9 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Insertion bridge
Insertion bridge - EB 80- DIK BU - 2715940
Insertion bridge, Pitch: 6.2 mm, Number of positions: 80, Color: blue
12/28/2016 Page 10 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
Insertion bridge - EB 10- DIK RD - 2716774
Insertion bridge, Pitch: 6.15 mm, Number of positions: 10, Color: red
Insertion bridge - EB 10- DIK BU - 2716680
Insertion bridge, Pitch: 6.15 mm, Number of positions: 10, Color: blue
Insertion bridge - EB 80- DIK RD - 2715953
Insertion bridge, Pitch: 6.2 mm, Number of positions: 80, Color: red
Insertion bridge - EB 10- DIK GY - 2715937
Insertion bridge, Pitch: 6.15 mm, Number of positions: 10, Color: gray
Insertion bridge - EB 80- DIK WH - 2715788
Insertion bridge, Pitch: 6.15 mm, Number of positions: 80, Color: white
Labeled terminal marker
12/28/2016 Page 11 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
Marker card - SK 6,2/3,8:FORTL.ZAHLEN - 0804374
Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting
type: Adhesive, for terminal block width: 6.2 mm, Lettering field: 6.2 x 3.8 mm
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10,
11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering
field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10,
11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering
field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2,
etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x
10.5 mm
12/28/2016 Page 12 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3,
N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND,
U, V, W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x
10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Screw bridge
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, Pitch: 6 mm, Number of positions: 100, Color: silver
12/28/2016 Page 13 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, Pitch: 6 mm, Number of positions: 10, Color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, Pitch: 6 mm, Number of positions: 20, Color: silver
Terminal marking
Marker card - SBS 6:UNBEDRUCKT - 1007222
Marker card, Card, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED,
Plotter, THERMOMARK CARD, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
12/28/2016 Page 14 / 15
https://www.phoenixcontact.com/gb/products/2718206
Multi-level terminal block - VIOK 1,5-3D/PE - 2718206
Accessories
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for
terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
12/28/2016 Page 15 / 15
