2731063

https://www.phoenixcontact.com/us/products/2731063 Bus coupler - IBS RL 24 BK RB-T-T - 2731063 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus coupler with remote bus branch for INTERBUS; twisted pair with 500 kbaud, rugged metal housing with IP67 protection, tool-free mounting on a separate mounting plate, can be used directly on welding robots The illustration shows version IBS RL 24 BK RB-LK-LK Product description INTERBUS Ruggedline modules are provided for harsh ambient conditions or in the case of high requirements regarding system diagnostics. To ensure maximum availability, these modules are equipped with a zinc die-cast housing (IP67). Therefore, they can be installed in the direct vicinity of welding tongs. Each Ruggedline module consists of a mounting plate and and electronics module. The electronics module is snapped onto the mounting plate and fixed with two screws if necessary. I/O errors can be clearly localized by means of extended diagnostics. Short-circuits of the power supply of the sensors, for example, are reported in groups of 4 inputs. And, in the case of a short-circuit at an output, the respective output is even reported directly. This information will be made available to the controller and displayed at the module. In the case of modules with fiber optic connection, the diagnostics capability even goes one step further. By using the latest fiber optic technology, the quality of the transmission path is permanently ascertained and optimally adjusted. This information is available to the controller and at the module. Due to these additional features, slow deterioration of the transmission path can be detected before errors occur during transmission or transmission is interrupted. In the case of Ruggedline modules, the bus medium can be selected. Apart from versions with fiber optic connection (polymer fiber), there are modules which are used with twisted pair cables. The bus medium can be changed from FO installation to a copper medium at any time using the corresponding plug-in adapters. The bus is connected by means of IP67 plug-in plugs, which transport both the bus signal and the power supply to the modules. For easy preparation, the power supply cable is connected to the plug using the QUICKON fast connection method, and connection of the fiber optic cable is made using a simple cutting and assembly tool; additional polishing is not necessary. If a fiber optic bus cable is assembled by the user, e.g. the bridge between 2 modules, it must be at least one meter long. For shorter cable bridges, please use only cable bridges from Phoenix Contact.   Product Features  Rugged metal housing  Comprehensive diagnostic functions  M12 connector for I/O devices  Rugged Line connector for INTERBUS, either with fiber optic or twisted pair, and supply voltage     Key commercial data Packing unit 1 pc 09/08/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/2731063 Bus coupler - IBS RL 24 BK RB-T-T - 2731063 Weight per Piece (excluding packing) 798.6 GRM Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 179 mm Height 67 mm Depth 71 mm Note on dimensions With bus connectors and mounting plate Ambient conditions Ambient temperature (operation) 0 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Permissible humidity (operation) 100 % Permissible humidity (storage/transport) 95 % (non-condensing) Air pressure (operation) 860 hPa ... 1080 hPa (up to 1500 m above mean sea level) Air pressure (storage/transport) 660 hPa ... 1080 hPa (up to 3500 m above mean sea level) Degree of protection IP65/IP67 General Weight 610 g Mounting type Wall mounting Protection class III, IEC 61140, EN 61140, VDE 0140-1 Air and creepage distances According to EN 50178: 1998 Interfaces Fieldbus system INTERBUS Designation INTERBUS Connection method Copper via IP67 RL connectors Transmission speed 500 kBit/s Power supply for module electronics Supply voltage 24 V DC Supply voltage range 18.5 V DC ... 32 V DC (including ripple) Ripple Max 3.6 VSS within the permissible voltage range Current consumption typ. 120 mA 09/08/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/2731063 Bus coupler - IBS RL 24 BK RB-T-T - 2731063 Classifications eCl@ss eCl@ss 4.0 27250203 eCl@ss 4.1 27250203 eCl@ss 5.0 27250203 eCl@ss 5.1 27242608 eCl@ss 6.0 27242608 eCl@ss 7.0 27242608 eCl@ss 8.0 27242608 ETIM ETIM 2.0 EC001434 ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 5.0 EC001604 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / INTERBUS CLUB / cULus Recognized Ex Approvals Approvals submitted Approval details 09/08/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/2731063 Bus coupler - IBS RL 24 BK RB-T-T - 2731063 Approvals UL Recognized      Nominal current IN 0.12 A Nominal voltage UN 24 V cUL Recognized      Nominal current IN 0.12 A Nominal voltage UN 24 V INTERBUS CLUB  cULus Recognized  Drawings Connection diagram IB DIAGRC RD 1RD 2 E LWL 1 LWL 2 LWL 3US 1US 2 INTERBUS IN INTERBUS OUT REMOTE BUS BRANCH Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 4 / 4