2736686

https://www.phoenixcontact.com/us/products/2736686 Power supply unit - ASI QUINT 100-240/2.4 EFD - 2736686 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power supply unit für AS interface, 2.4 A, integrated ground fault detector, IP20 degree of protection Product Description Power supply unit for AS-Interface systems. Special modules with an output voltage range of 29.5 V - 31.6 V DC are used to supply the AS-Interface systems. The AS-i system also requires a data decoupling network in the power supply unit in order to be able to transmit communication signals along the power line. The ASI QUINT 100-240/2.4 EFD can supply an AS-i system with up to 2.4 A. Safety through automatic ground fault detection: if two ground faults occur in an AS-i system, this can cause the machines to inadvertently start up or not to be able to stop operation. The ASI QUINT has an integrated ground fault detection function. A ground fault is signaled via LED and via an alarm output. Product Features ■ ■ ■ Integrated filters ensure that the modulated data flow is not affected Integrated ground-fault monitoring signals short circuits on the secondary side Wide-range input for operation on all common AC and DC networks Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 1140.0 g Custom tariff number 85044030 Country of origin Thailand Technical data Dimensions Width 55 mm Height 145 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 145 mm 03/07/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2736686 Power supply unit - ASI QUINT 100-240/2.4 EFD - 2736686 Technical data Dimensions Depth with alternative assembly 58 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data Nominal input voltage range 100 V AC ... 240 V AC AC frequency range 45 Hz ... 65 Hz Frequency range DC 0 Hz Nominal power consumption 72 W Inrush surge current < 15 A (typical) Power failure bypass > 20 ms (120 V AC) > 80 ms (230 V AC) Input fuse 5 A (slow-blow, internal) Choice of suitable circuit breakers 6 A ... 16 A (Characteristics B, C, D, K) Output data Nominal output voltage 30.1 V DC ±1.5 % Nennausgangsstrom (IN) 2.4 A Connection in parallel No Connection in series Yes Residual ripple < 30 mVPP Output power 72 W Typical response time < 0.5 s Peak switching voltages nominal load < 50 mVPP Maximum power dissipation in no-load condition 3W Power loss nominal load max. 11 W General Net weight 0.75 kg Operating voltage display LED Efficiency > 86 % (for 230 V AC and nominal values) Insulation voltage input/output 4 kV AC (type test) 2 kV AC (routine test) MTTF/ MTBF (IEC 61709, SN 29500) > 500000 h 03/07/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2736686 Power supply unit - ASI QUINT 100-240/2.4 EFD - 2736686 Technical data General Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm Connection data, input Connection method Pluggable spring-cage connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 9 mm Screw thread M3 Connection data, output Connection method Spring-cage connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Screw thread M3 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise immunity EN 61000-6-2:2005 Connection in acc. with standard CUL Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 Standard - Safety of transformers EN 61558-2-17 Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) DIN VDE 0100-410 Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard - Safe isolation DIN VDE 0100-410 DIN VDE 0106-1010 Standard – Limitation of mains harmonic currents EN 61000-3-2 03/07/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2736686 Power supply unit - ASI QUINT 100-240/2.4 EFD - 2736686 Technical data Standards and Regulations UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950 Low Voltage Directive Conformance with LV directive 2006/95/EC Classifications eCl@ss eCl@ss 4.0 27250202 eCl@ss 4.1 27250202 eCl@ss 5.0 27259205 eCl@ss 5.1 27242692 eCl@ss 6.0 27242692 eCl@ss 7.0 27242692 eCl@ss 8.0 27242611 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC002542 ETIM 5.0 EC002583 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / ASI-Interface / IECEE CB Scheme / EAC / EAC / cULus Recognized / cULus Listed Ex Approvals 03/07/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2736686 Power supply unit - ASI QUINT 100-240/2.4 EFD - 2736686 Approvals Approvals submitted Approval details UL Recognized  UL Listed  cUL Recognized  cUL Listed  ASI-Interface  IECEE CB Scheme  EAC  EAC  cULus Recognized  cULus Listed  03/07/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2736686 Power supply unit - ASI QUINT 100-240/2.4 EFD - 2736686 Drawings Block diagram L PFC EFD GND N PE 13 14 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/07/2016   Page 6 / 6