2736835

https://www.phoenixcontact.com/us/products/2736835 Distributed I/O device - FLM DI 16 M12 - 2736835 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) The local bus device has digital inputs. Functions: 16 digital inputs, 3 ms filter time, 500 kbaud/2 Mbaud selection, channel-specific diagnostics, short-circuit and overload protection, 1.2 A nominal current, M12 fast connection technology. Product Features ■ ■ ■ ■ ■ Flexible power supply concept Diagnostic and status indicators SPEEDCON fast locking system Short-circuit and overload protection Consistent connection via M12 connectors Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 360.0 g Custom tariff number 85176200 Country of origin Germany Technical data Dimensions Width 70 mm Height 178 mm Depth 50 mm Drill hole spacing 168 mm Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (storage/transport) 95 % Air pressure (operation) 80 kPa ... 106 kPa (up to 2000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP65/IP67 03/08/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/2736835 Distributed I/O device - FLM DI 16 M12 - 2736835 Technical data General Net weight 310 g Mounting type Wall mounting Interfaces Designation Fieldline local bus Connection method M12 connector, B-coded Designation connection point Copper cable Transmission speed 500 kBit/s / 2 MBit/s Number of positions 5 Power supply for module electronics Connection method M12 connector Designation UL Supply voltage 24 V DC Supply voltage range 18 V DC ... 30 V DC (including ripple) Fieldline potentials Voltage supply UL 24 V DC Power supply at UL max. 4 A Current consumption from UL max. 50 mA (At 2 Mbaud) typ. 40 mA (At 2 Mbaud) max. 50 mA (At 500 kBaud) typ. 35 mA (At 500 kBaud) Voltage supply US 24 V DC Power supply at US max. 4 A Current consumption from US typ. 5 mA (plus power supply for sensors) max. 1.2 A Digital inputs Input name Digital inputs Connection method M12 connector 2, 3, 4-wire Number of inputs 16 Protective circuit Protection against polarity reversal Filter time 3 ms Input characteristic curve IEC 61131-2 type 1 Input voltage 24 V DC Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 13 V DC ... 30 V DC 03/08/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/2736835 Distributed I/O device - FLM DI 16 M12 - 2736835 Technical data Digital inputs Delay at signal change from 0 to 1 3.1 ms Delay at signal change from 1 to 0 4.1 ms Standards and Regulations Test section To I/O 500 V AC Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals 03/08/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/2736835 Distributed I/O device - FLM DI 16 M12 - 2736835 Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals UL Recognized / cUL Recognized / cULus Recognized Approvals submitted Approval details UL Recognized  cUL Recognized  EAC  cULus Recognized  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/08/2016   Page 4 / 4