2742036

https://www.phoenixcontact.com/us/products/2742036 Inline terminal - IB IL 24 BR/DC - 2742036 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline extension module, for brake control in connection with Inline power terminal blocks, brake module for 24 V DC brakes Product description The brake module is a passive, electronic brake control switch which can be snapped on the power-level terminal block using a 3-pos. inverted COMBICON plug. The connection to the brake is made using a 2-pos. COMBICON plug with a connection cross section of up to 2.5 mm².   Product Features  Connection option for an external passive brake module  Hand-held operator panel mode  Integrated electronic motor protection in accordance with IEC 60947-4  Safe isolation between mains voltage and 24 V supply voltage according to EN 50178  Diagnostic and status indicators  Motor control via OUT process data  Motor current monitoring Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 120.3 GRM Custom tariff number 85369010 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 55 mm Height 57 mm Depth 16 mm 09/08/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/2742036 Inline terminal - IB IL 24 BR/DC - 2742036 Technical data Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 55 °C (permitted) Ambient temperature (storage/transport) -25 °C ... 85 °C (permitted) Permissible humidity (operation) 75 % ... 85 % (75% average, 85% seldom) Permissible humidity (storage/transport) 75 % ... 85 % (75% average, 85% seldom) Air pressure (operation) 80 kPa ... 106 kPa (up to 2000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) General Protection class III, IEC 61140, EN 61140, VDE 0140-1 Weight 91 g Electrical isolation Test section 24 V supply (US), GND, brake control/protective earth ground (PE) 500 V AC 50 Hz 1 min 24 V supply (US), GND, brake control/brake output 500 V AC 50 Hz 1 min Brake output/protective earth ground (PE) 500 V AC 50 Hz 1 min Brake module Connection name Connection to the power-level terminal block Connection method 3-pos. inverted COMBICON connectors (X8) Control voltage 24 V DC (= Us from the power-level terminal block) Control current 17 mA Current limitation Through resistor Brake to be connected Connection name Connection of the brake to the brake module Connection method 2-pos. COMBICON connectors (X9) Cross section 2.5 mm² (maximum conductor cross section) Protective circuit Polarity reversal protection, surge voltage suppression > 36 V Type of contact Polarized semiconductor switch Connection voltage 24 V DC Residual voltage 0.4 V DC (maximum) Classifications eCl@ss eCl@ss 4.0 27250304 eCl@ss 4.1 27250304 eCl@ss 5.0 27250304 09/08/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/2742036 Inline terminal - IB IL 24 BR/DC - 2742036 Classifications eCl@ss eCl@ss 5.1 27242609 eCl@ss 6.0 27242609 eCl@ss 7.0 27242609 eCl@ss 8.0 27242609 ETIM ETIM 2.0 EC001433 ETIM 3.0 EC001601 ETIM 4.0 EC001601 ETIM 5.0 EC001605 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST  Drawings 09/08/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/2742036 Inline terminal - IB IL 24 BR/DC - 2742036 Connection diagram 13 + Brake rectifier 14 3 M IB IL 400 BR Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 4 / 4