2742599

https://www.phoenixcontact.com/us/products/2742599 Inline terminal - IB IL 24 EDO 2 - 2742599 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline digital output terminal block, without accessories, 2 outputs, 24 V DC, 500 mA, 4-wire connection method, extended diagnostics, outputs can be parameterized Product description The terminal is designed for use within an Inline station. It serves to output signals and provides the possibility of channel for channel extended diagnostics for overload, short-circuit or line interrupt faults. Features - Connections for 2 digital actuators - Connection of the actuators using 2 , 3 or 4-wire system - Nominal current per output: 500 mA - Total current of terminal: 1 A - Short-circuit and overload protected outputs - Line interrupt detection - Diagnostics and status indicators - Individual channel diagnostics - Parameterizable behavior of outputs in the case of an INTERBUS reset   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 65.4 GRM Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 12.2 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) 09/08/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2742599 Inline terminal - IB IL 24 EDO 2 - 2742599 Technical data Ambient conditions Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Interfaces Designation Inline local bus Connection method Inline data jumper Digital outputs Output name Digital outputs Output description Extended diagnostics, parameterizable outputs Connection method Spring-cage connection 2, 3, 4-wire Number of outputs 2 Protective circuit Short-circuit and overload protection Output voltage 24 V DC (US - 1 V) Nominal output voltage 24 V DC (voltage difference at Inom ≤ 1 V) Maximum output current per channel 500 mA Maximum output current per module 1A Nominal load, inductive 12 W Nominal load, lamp 12 W Nominal load, ohmic 12 VA Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC Communications power UL 7.5 V (via voltage jumper) Current consumption max. 40 mA (from the local bus) General Weight 41 g Note on weight specifications Without plug Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min 09/08/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2742599 Inline terminal - IB IL 24 EDO 2 - 2742599 Technical data General 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Diagnostics messages Short-circuit / overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 40 mA Main circuit supply UM 24 V DC Segment supply voltage US 24 V DC (nominal value) Current consumption from US max. 1 A Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Drawings 09/08/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2742599 Inline terminal - IB IL 24 EDO 2 - 2742599 Connection diagram Dimensioned drawing 140,5 1.1 2.1 1.4 2.4 71,5 2.2 2.3 +24 V 1.2 1.3 OUT 2 +24 V OUT 1 119,8 09/08/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2742599 Inline terminal - IB IL 24 EDO 2 - 2742599 Block diagram Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 5 / 5