2742696

https://www.phoenixcontact.com/us/products/2742696 Inline terminal - IB IL DO 4 AC-1A - 2742696 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline digital output terminal block, without accessories, 4 outputs, 12 to 253 V AC, 1 A, 3-wire connection method The illustration shows versions IB IL DO 1 AC and IB IL DO 4 AC-1A     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 160.4 GRM Custom tariff number 85389099 Country of origin Germany Technical data Dimensions Width 48.8 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.) Permissible humidity (storage/transport) 75 % ... 85 % (slight temporary condensation may sometimes appear on the housing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 09/08/2014   Page 1 / 3 https://www.phoenixcontact.com/us/products/2742696 Inline terminal - IB IL DO 4 AC-1A - 2742696 Technical data Interfaces Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Digital outputs Output name Digital outputs Connection method Spring-cage connection 3-conductor Number of outputs 4 Protective circuit Overload protection, short-circuit protection of outputs Maximum output current per channel 1A Maximum output current per module 4A Power supply for module electronics Supply voltage 24 V DC (nominal value) Supply voltage range 19.2 V DC ... 30 V DC Communications power UL 7.5 V (via voltage jumper) Current consumption max. 45 mA (from the local bus) Power consumption max. 0.34 W (from the local bus) General Weight 130 g Note on weight specifications Without plug Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logics) / I/O area 2500 V AC 50 Hz 1 min Routine test 1200 V AC 50 Hz 1 min I/O area / FE 500 V AC 50 Hz 1 min Output / Phase 500 V AC 50 Hz 1 min Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 45 mA Main circuit supply UM 230 V AC Current consumption from UM max. 4 A AC 09/08/2014   Page 2 / 3 https://www.phoenixcontact.com/us/products/2742696 Inline terminal - IB IL DO 4 AC-1A - 2742696 Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Drawings Connection diagram Dimensioned drawing 140,5 1.1 2.1 1.2 2.2 1.3 2.3 1.4 2.4 5 71,5 N OUT 1 119,8 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 3 / 3