PSM-LWL-KDHEAVY-980/1000
Polymer fiber cable, duplex 980/1000 μm,
medium-weight version for fixed indoor installation
Data sheet
100330_en_02
1
© PHOENIX CONTACT 2012-09-27
Description
1.2
Structure
1
The PSM-LWL-KDHEAVY-980/100 fiber optic cable is a
medium-weight round cable for fixed indoor installation.
2
1.1
3
–
–
–
–
Properties
Universal installation cable for fixed indoor installation
Polyurethane (PUR) outer sheath
2.2 mm single wires made from extremely hard-wearing
polyamide (PA)
Halogen-free, ozone and UV resistant
4
5
Figure 1
1
2
3
4
5
Cross section drawing
PUR outer sheath
PA sheath
Fibers
Separator (aluminum foil)
Strain relief
Make sure you always use the latest documentation.
It can be downloaded at www.phoenixcontact.net/catalog.
This data sheet is valid for all products listed on the following page:
PSM-LWL-KDHEAVY-980/1000
2
Ordering data
Cables
Description
Type
Order No.
Pcs. / Pkt.
Polymer fiber cable, duplex, 980 µm/1000 µm, medium-weight version for
fixed indoor installation,
by the meter without plug
PSM-LWL-KDHEAVY-980/1000
2744319
1
Polymer fiber cable, duplex 980/1000 μm, medium-weight version for fixed
indoor installation,
assembled with plugs (IP20 heads only)
FOC-KDHEAVY-1011/IP20/...
2901553
1
Polymer fiber cable, duplex 980/1000 μm, medium-weight version for fixed
indoor installation,
assembled with plugs
FOC-KDHEAVY-1011/...
1402188
1
Accessories
Description
Type
Order No.
Pcs. / Pkt.
Fiber optic plug-in connector, SCRJ plug set for polymer fibers, consisting of
two duplex quick mounting plugs with bend protection
PSM-SET-SCRJ-DUP/2-POF
2708656
1
Fiber optic plug-in connector, F-SMA plug set, for polymer fibers, consisting of four quick mounting plugs with bend protection
PSM-SET-FSMA/4-KT
2799720
1
Polymer fiber assembly kit, consisting of: stripping blade, stripping pliers,
polishing wheels for F-SMA and SCRJ quick mounting plugs, polishing pad,
and emery paper
PSM-POF-KONFTOOL
2744131
1
Polymer fiber polishing set, for F-SMA quick mounting plugs
PSM-SET-FSMA-POLISH
2799348
1
Refilling set, for VS-SCRJ-POF-POLISH, consisting of two polishing discs
and a polisher
VS-SCRJ-POF-POLISH
1656673
1
Stripping tool, for removing cables (especially fiber optic cables)
of Ø 4 mm ... 16 mm
WIREFOX-D 16
1212173
1
Fiber optic measuring case, consisting of an optical power meter, F-SMA
and B-FOC adapters, reference fibers, and operating instructions
PSM-FO-POWERMETER
2799539
1
2901560
1
Fiber optic measuring case supplementary set, for devices with SCRJ in- PSM-FO-POWERMETER SCRJterface, consisting of one-meter polymer reference fiber (SC Simplex to FSET
SMA plug), one-meter HCS GI reference fiber (SC Simplex to B-FOC plug),
and SCRJ coupling
3
Technical data
General data
Cable type
Polymer fiber, 980/1000 µm
Cable abbreviation
J-V11Y 4Y2P 980/1000 160A 10
Cable length
Free input (0.4 ... 100.0 m)
Weight
33 kg/km
Temperature range
Installation
-5°C ... +50°C
Operation
-20°C ... +70°C
Storage
-40°C ... +80°C
Altitude
5000 m
Fibers
Type
980/1000 µm, step index profile
Material
PMMA
Attenuation
At 650 nm
170 dB/km (monochromatic)
At 660 nm
230 dB/km (LED)
Bandwidth length product
At 650 nm
Numerical aperture
100330_en_02
10 MHz x 100 m
0.50
PHOENIX CONTACT
2
PSM-LWL-KDHEAVY-980/1000
Single wires
Material
Polyamide (PA)
Color
Black and orange
Wire diameter
2.2 mm ±0.07 mm
Stranding
Two single elements wrapped in aluminum foil
Outer sheath
Material
Polyurethane (PUR)
Color
Red
Diameter
6 mm ±0.5 mm
Strain relief elements
Non-metallic, aramide yarn
Imprint
PHOENIX CONTACT FIBER OPTIC CABLE
J-V11Y 4Y2P 980/1000 160A 10 HEAVY
and running length specification in m,
date of manufacture
Mechanical properties according to IEC 60794-1-2
Cables
Bending radius
Method E11, test type A
Single wires
Temporary
At least 30 mm
Temporary
Permanent
At least 30 mm
Permanent
At least 20 mm
Temporary
Maximum 600 N
Temporary
Maximum 60 N
Permanent
Maximum 100 N
Permanent
Maximum 10 N
Temporary
Maximum 200 N/cm
Permanent
Maximum 20 N/cm
Tensile strength
Method E1
Lateral strength
Method E3
Impact strength
Method E4
At least 2 Nm, 10°impacts
Resistance to abrasion
Method E2, test type A
At least 5000 cycles, 0.45 mm radius of the
steel point, 7 N
Roller change bending test
Method E8
At least 30 mm
At least 50,000 cycles, r = 20 mm
Material properties
Resistance to oil
IRM 902 100°C according to DIN VDE 0473-811-2-1
Paint or varnish coating
Free from substances that would ruin a paint or varnish coating according to
central standard P-VW 3.10.757 65 0 of VW, Audi, Seat
Halogen-free
According to IEC 60754-2 A1
Resistance to ozone
According to DIN VDE 0472-805, test type B
UV resistance
According to DIN EN ISO 4892-2, method A
Fire load
1.02 MJ/m (0.24 kWh/m)
RoHS conformance
Cable meets EU directive 2002/95/EC
100330_en_02
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany
www.phoenixcontact.com
3
