2750400

https://www.phoenixcontact.com/us/products/2750400 Special function module - IB ST 24 CNT - 2750400 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) INTERBUS-ST counter module, 4 counter inputs, 24 V or 5 V DC signal level, IP20 protection, consisting of: Terminal part with screw connection and module electronics Product description INTERBUS ST counter module The IB ST 24 CNT module is designed for counting pulses, measuring frequencies and periods, and generating square-wave pulses. The module has 4 channels which can be operated independently of one another. The counter then has a 16-bit resolution. Cascading is possible by simply connecting several counters in a row. Each channel has a digital output that can be set according to the event. Simple applications can use a single device. The module is available with either screw or spring-cage connection.   Product Features  Connection of actuators in 2-wire technology  Connection of sensors in 2 or 3-wire technology  Short-circuit-proof and overload-protected outputs Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 737.4 GRM Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Interfaces Interface ST local bus Connection method ST local bus connector Transmission speed 500 kBit/s 09/08/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2750400 Special function module - IB ST 24 CNT - 2750400 Technical data Interfaces Transmission physics Copper Ambient conditions Degree of protection IP20 Power supply Communications power UL 9 V DC (UI, from the ST local bus) Max. current consumption 220 mA (from the local bus) Typical current consumption 200 mA (from the local bus) 4 A (max., to Us) I/O voltage 24 V DC (Us) Ripple ± 1.2 V 5 % I/O voltage range 20 V ... 30 V Electrical isolation Test section Bus/Outputs 500 V AC 50 Hz 1 min Bus/Inputs 500 V AC 50 Hz 1 min Bus/Ground conductor 500 V AC 50 Hz 1 min I/O voltage/Ground conductor 500 V AC 50 Hz 1 min Counter input Number of inputs 4 Operating mode Event counting, frequency/time measurement Input frequency 90 kHz (max. 300 kHz) Input voltage 5 V DC 24 V DC Input current 11 mA (typ., 24 V DC input) 8 mA (typ., 5 V DC input) Control input Number of inputs 4 Connection method 2, 3-wire Outputs Number of outputs 4 Connection method 2-wire Output voltage US - 0.5 V DC UOut LED US Output current 500 mA (per output, up to 300 Hz) 250 mA (per output, up to 10 kHz) 500 mA (per sensor) 09/08/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2750400 Special function module - IB ST 24 CNT - 2750400 Technical data General Weight 660 g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Connection data Screw connection 0.2 mm² 2.5 mm² 0.2 mm² 2.5 mm² 24 12 8 mm Classifications eCl@ss eCl@ss 4.0 27250304 eCl@ss 4.1 27250304 eCl@ss 5.0 27250304 eCl@ss 5.1 27242605 eCl@ss 6.0 27242605 eCl@ss 7.0 27242605 eCl@ss 8.0 27242605 ETIM ETIM 2.0 EC001433 ETIM 3.0 EC001601 ETIM 4.0 EC001601 ETIM 5.0 EC001601 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals GOST Ex Approvals 09/08/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2750400 Special function module - IB ST 24 CNT - 2750400 Approvals Approvals submitted Approval details GOST  Drawings Dimensioned drawing 117 116 Connection diagram 09/08/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2750400 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 5 / 5