2751218

https://www.phoenixcontact.com/us/products/2751218 Bus coupler - IBS ST 24 BK DIO 8/8/3-LK - 2751218 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) INTERBUS-ST I/O bus terminal module, FO connection, 8 digital inputs, 8 digital outputs, 500 mA, I/Os also available via FLK plug, IP20 protection, consisting of: Terminal part with screw connection and module electronics Product description INTERBUS ST bus terminal modules with additional interfaces (I/O) In addition to the actual bus terminal module functions, 8 digital inputs and 8 digital outputs are integrated into the INTERBUS input/output bus terminal modules. On top of this, the modules can be extended by up to four INTERBUS-ST input/output modules. All the bus terminal module functions, such as switching of the input/output modules from the INTERBUS network remain available without restrictions. This bus terminal module is particularly suitable for use in applications for which very little space is available, or where only a few input/output points are required. The IBS ST 24 BK DIO 8/8/3-T or -LK modules provide the option of assigning inputs and outputs either by screw terminal blocks in the termination block, or using an FLK system connector. This permits the ELR 319 electronic load relay or VARIOFACE input/output modules to be connected simply using 14-pos. FLK connectors. The IBS ST 24 BK RB-T or IBS ST 24 BK RB-LK modules have an additional remote bus branch. This remote bus branch has the same restrictions regarding structure as any remote bus. All devices with remote bus interface can be linked in here. All INTERBUS bus terminal modules make it possible to individually ebnable/disable the additional bus interfaces. To some extent, they perform the role of two bus terminal modules in the INTERBUS system and are also treated as such in the address lists and configuring software (CMD). Note: When configuring buses branching off from the bus terminal modules, please observe the topology supported by INTERBUS controller boards.   Product Features  Additional I/Os onboard  Additional remote/local bus branches  Copper or fiber optic connection     Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 750.1 GRM Custom tariff number 85389091 Country of origin Germany 09/08/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2751218 Bus coupler - IBS ST 24 BK DIO 8/8/3-LK - 2751218 Technical data Dimensions Width 118 mm Height 117 mm Depth 116 mm Ambient conditions Ambient temperature (operation) 0 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Permissible humidity (operation) 75 % (on average, 85% infrequently, non-condensing) Permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing) Air pressure (operation) 80 kPa ... 106 kPa (up to 2000 m above mean sea level) Air pressure (storage/transport) 80 kPa ... 106 kPa (up to 2000 m above mean sea level) Degree of protection IP20 Interfaces Fieldbus system INTERBUS Designation INTERBUS Connection method FSMA plugs Wavelength typ. 650 nm Designation connection point Incoming/Outgoing Remote Bus Transmission physics Polymer fiber Fieldbus system Lokalbus Designation ST local bus Connection method ST local bus connector Digital inputs Input name Digital inputs Connection method Screw-cage terminal blocks or FLK connectors 3-conductor Number of inputs 8 Typical response time ≥ 1 ms (typical) Protective circuit Overload protection Fuse in header Input voltage 24 V DC Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 13 V DC ... 30 V DC Nominal input current at UIN typ. 5 mA (per channel) Digital outputs Output name Digital outputs Connection method Screw-cage terminal blocks or FLK connectors 09/08/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2751218 Bus coupler - IBS ST 24 BK DIO 8/8/3-LK - 2751218 Technical data Digital outputs 3-conductor Number of outputs 8 Protective circuit Short-circuit protection Electronic Maximum output current per channel 500 mA Maximum output current per module / terminal block 4A Maximum output current per group 2A Nominal load, lamp 12 W Nominal load, ohmic 12 W Power supply for module electronics Supply voltage 24 V DC Supply voltage range 18.5 V DC ... 30.5 V DC (including ripple) Ripple 3.6 Vpp within the allowable voltage range Current consumption typ. 170 mA (without ST module expansions) General Weight 690 g Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section Incoming remote bus / Outgoing remote bus 500 V AC 50 Hz 1 min Incoming remote bus/Remote bus branch 500 V AC 50 Hz 1 min Incoming remote bus/ST interface 500 V AC 50 Hz 1 min Classifications eCl@ss eCl@ss 4.0 27250203 eCl@ss 4.1 27250203 eCl@ss 5.0 27250203 eCl@ss 5.1 27242608 eCl@ss 6.0 27242608 eCl@ss 7.0 27242608 ETIM ETIM 2.0 EC001434 ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 5.0 EC001604 09/08/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2751218 Bus coupler - IBS ST 24 BK DIO 8/8/3-LK - 2751218 Classifications UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals GOST / INTERBUS CLUB Ex Approvals Approvals submitted Approval details GOST  INTERBUS CLUB  Drawings Connection diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ...8 OUT 8 OUT 1 IN 1 1... +24 V +24 V IN 1 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1... ...8 09/08/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2751218 Bus coupler - IBS ST 24 BK DIO 8/8/3-LK - 2751218 Dimensioned drawing Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 5 / 5