2761622

https://www.phoenixcontact.com/gb/products/2761622 D-SUB bus connector - SUBCON 25/M-SH - 2761622 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) D-SUB connector, 25-pos., male connector, one cable entry < 35°, universal type for all systems, pin assignment: 1, 2, 3, ..., 24, 25 to screw connection terminal block Why buy this product ■ ■ ■ ■ ■ Easy assembly thanks to knurled screws High level of EMC Assembly under field conditions For universal use Flexibility in terms of cable entry selection Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 84.44 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Max. cable diameter 10 mm Min. cable diameter 4 mm Width 16 mm Height 55 mm Length 79 mm Ambient conditions Ambient temperature (operation) -20 °C ... 75 °C Ambient temperature (storage/transport) -25 °C ... 80 °C Altitude 5000 m (For restrictions see manufacturer's declaration) 10/03/2016   Page 1 / 4 https://www.phoenixcontact.com/gb/products/2761622 D-SUB bus connector - SUBCON 25/M-SH - 2761622 Technical data General Nominal voltage UN 50 V Nominal current IN 100 mA Signal Modbus RS-232 RS-422 RS-485 Insertion/withdrawal cycles > 200 SUBCON fixing screws 4-40 UNC Tightening torque 0.4 Nm Housing material ABS, metal-plated Pin assignment All connections are 1:1 on the screw terminal block MTTF 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day)) 1817 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day)) 155 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day)) Connection data Connection D-SUB connection Number of positions 25 Connection method D-SUB connector Connection PCB connection Connection method Screw connection Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 18 Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 Stripping length 5 mm Tightening torque 0.4 Nm Standards and Regulations Connection in acc. with standard CUL ATEX  II 3 G Ex nA IIC T4 Gc X Classifications eCl@ss eCl@ss 4.0 27140816 10/03/2016   Page 2 / 4 https://www.phoenixcontact.com/gb/products/2761622 D-SUB bus connector - SUBCON 25/M-SH - 2761622 Classifications eCl@ss eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440302 ETIM ETIM 2.0 EC001132 ETIM 3.0 EC001132 ETIM 4.0 EC001132 ETIM 5.0 EC001132 UNSPSC UNSPSC 6.01 30211802 UNSPSC 7.0901 39121402 UNSPSC 11 39121402 UNSPSC 12.01 39121402 UNSPSC 13.2 39121402 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / EAC / cULus Recognized Ex Approvals ATEX Approvals submitted Approval details UL Recognized  10/03/2016   Page 3 / 4 https://www.phoenixcontact.com/gb/products/2761622 D-SUB bus connector - SUBCON 25/M-SH - 2761622 Approvals cUL Recognized  CSA  EAC  cULus Recognized  Drawings Schematic diagram Dimensional drawing C 16 A 5 50 60 B Stripping specifications Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 10/03/2016   Page 4 / 4