https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
1-level terminal block with double connection on both sides, cross section: 0.2 - 2.5 mm², AWG: 30 - 10,
width: 6.2 mm, color: Gray
Why buy this product
Two connection points on each side to accommodate several conductors
Double bridge shaft enables individual potential distribution and supply
Key Commercial Data
Packing unit
50 STK
GTIN
GTIN
4017918068363
Weight per Piece (excluding packing)
15.300 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of positions
1
Number of levels
1
Number of connections
4
Potentials
1
Nominal cross section
4 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V2
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
12/28/2016 Page 1 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Technical data
General
Insulating material group
I
Maximum load current
32 A (In the case of a 6 mm² conductor cross section, the maximum
load current must not be exceeded by the total current of all connected
conductors)
Nominal current IN
32 A (with 6 mm² conductor cross section)
Nominal voltage UN
630 V
Open side panel
Yes
Shock protection test specification
IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
4 mm² / 0.9 kg
2
6 mm / 1.4 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Result of thermal test
Test passed
12/28/2016 Page 2 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Technical data
General
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
125 °C
Dimensions
Width
6.2 mm
End cover width
1.5 mm
Length
63.5 mm
Height NS 35/7,5
47 mm
Height NS 35/15
54.5 mm
Height NS 32
52 mm
Connection data
Note
Terminal point
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Cross section with insertion bridge, solid max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
12/28/2016 Page 3 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Technical data
Connection data
Cross section with insertion bridge, solid max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Stripping length
8 mm
Internal cylindrical gage
A3
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
12/28/2016 Page 4 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Classifications
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / RS / PRS / EAC / EAC / DNV GL / cULus Recognized
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services/testingand-certification/certified-product-listing/
13631
B
C
D
mm²/AWG/kcmil
22-10
22-10
22-10
Nominal current IN
25 A
25 A
5A
Nominal voltage UN
300 V
300 V
600 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
30-10
30-10
30-10
Nominal current IN
30 A
30 A
5A
Nominal voltage UN
300 V
300 V
600 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
30-10
30-10
30-10
Nominal current IN
30 A
30 A
5A
Nominal voltage UN
300 V
300 V
600 V
FILE E 60425
FILE E 60425
12/28/2016 Page 5 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Approvals
RS
http://www.rs-head.spb.ru/en/index.php
10.04059.250
PRS
http://www.prs.pl/
TE/1825/880590/09
EAC
EAC-Zulassung
EAC
7500651.22.01.00246
https://www.dnvgl.com/
TAE00001CT
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
DNV GL
cULus Recognized
Accessories
Accessories
Bridge
Fixed bridge - FB-150 METER - 0201595
Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
12/28/2016 Page 6 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
12/28/2016 Page 7 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
12/28/2016 Page 8 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm,
length 2000 mm
12/28/2016 Page 9 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
End block
12/28/2016 Page 10 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
12/28/2016 Page 11 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
End cover - D-UDK 4 - 2775113
End cover, Length: 63.5 mm, Width: 1.5 mm, Height: 35.9 mm, Color: gray
Insertion bridge
Insertion bridge - EB 3- 6 - 0201142
Insertion bridge, Pitch: 6.2 mm, Number of positions: 3, Color: gray
Insertion bridge - EB 2- 6 - 0201155
Insertion bridge, Pitch: 6.2 mm, Number of positions: 2, Color: gray
Insertion bridge - EB 10- 6 - 0201139
Insertion bridge, Pitch: 6.2 mm, Number of positions: 10, Color: gray
Insulating sleeve
Bridge bar isolator - IS-K 4 - 1302338
Bridge bar isolator, Color: gray
Labeled terminal marker
12/28/2016 Page 12 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10,
11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering
field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10,
11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering
field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2,
etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x
10.5 mm
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3,
N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
12/28/2016 Page 13 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND,
U, V, W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x
10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Partition plate
Separating plate - TS-KK 3 - 2770215
Separating plate, Length: 14 mm, Width: 0 mm, Height: 16 mm, Color: gray
Screw bridge
Jumper - ISSBI 10- 6 - 0301505
Jumper, Pitch: 6 mm, Number of positions: 10, Color: silver
12/28/2016 Page 14 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Jumper - LB 10-6 BU - 0202280
Jumper, Pitch: 6 mm, Number of positions: 10, Color: blue
Jumper - LB 10-6 RD - 0202293
Jumper, Pitch: 6 mm, Number of positions: 10, Color: red
Jumper - LB 10-6 GY - 0202358
Jumper, Pitch: 6 mm, Number of positions: 10, Color: gray
Jumper - LB 100-6 GY - 0202345
Jumper, Pitch: 6 mm, Number of positions: 100, Color: gray
Jumper - LB 100-6 RD - 0202316
Jumper, Number of positions: 100, Color: red
12/28/2016 Page 15 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Jumper - LB 100-6 BU - 0202303
Jumper, Number of positions: 100, Color: blue
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, Pitch: 6 mm, Number of positions: 100, Color: silver
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, Pitch: 6 mm, Number of positions: 10, Color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, Pitch: 6 mm, Number of positions: 20, Color: silver
Short-circuit connector
Short-circuit connector - KSS 3- 6 - 0309523
Short-circuit connector, Pitch: 6 mm, Number of positions: 3, Color: black
12/28/2016 Page 16 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Short-circuit connector - KSS 6 - 0301547
Short-circuit connector, Pitch: 6 mm, Number of positions: 2, Color: black
Switching jumper
Switching jumper - SBRN 2-7 - 1413230
Switching jumper, Pitch: 7 mm, Number of positions: 2, Color: silver
Switching jumper - USBR 2-7 - 2303239
Switching jumper, Pitch: 7 mm, Number of positions: 2, Color: silver
Switching jumper - USBRJ 2-7 - 2305538
Switching jumper, Number of positions: 2, Color: silver
Terminal marking
Marker card - SBS 6:UNBEDRUCKT - 1007222
Marker card, Card, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm
12/28/2016 Page 17 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED,
Plotter, THERMOMARK CARD, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for
terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Test plug terminal block
Reducing plug - RPS - 0201647
Reducing plug, Color: gray
Test socket
Female test connector - PSBJ 3/13/4 - 0201304
Female test connector, Color: silver
12/28/2016 Page 18 / 19
https://www.phoenixcontact.com/gb/products/2775016
Feed-through terminal block - UDK 4 - 2775016
Accessories
Female test connector - PSB 3/10/4 - 0601292
Female test connector, Color: silver
Warning label printed
Warning label - WS 3- 6 - 1004115
Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 6 mm
Warning label - WS 5- 6 - 1004403
Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 6 mm
Warning label - WS 4- 6 - 1004209
Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 6 mm
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
12/28/2016 Page 19 / 19
