2775281

https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Single-level terminal block with two-sided double connection and built-in diode, cross section: 0.2 - 2.5 mm², AWG: 30 - 10, width: 6.2 mm, color: gray Your advantages  Two connection points on each side to accommodate several conductors  Double bridge shaft enables individual potential distribution and supply Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918251802 Weight per Piece (excluding packing) 15.280 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 4 Potentials 1 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 8 kV 12/22/2019   Page 1 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Technical data General Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W Maximum load current 10 mA (the maximum current is determined by the diode) Nominal current IN 10 mA Nominal voltage UN 10 V Open side panel Yes Dimensions Width 6.2 mm End cover width 1.5 mm Length 63.5 mm Height NS 35/7,5 47 mm Height NS 35/15 54.5 mm Height NS 32 52 mm Connection data Note Terminal point Connection 1 level Connection method Screw connection Screw thread M3 Stripping length 8 mm Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² 12/22/2019   Page 2 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Technical data Connection data Cross section with insertion bridge, solid max. 2.5 mm² Cross section with insertion bridge, stranded max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Internal cylindrical gage A3 Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V2 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 12/22/2019   Page 3 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Classifications ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC      EAC-Zulassung EAC      RU CDE.A*30.B.01742 12/22/2019   Page 4 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Accessories Bridge Fixed bridge - FB-150 METER - 0201595 Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long     DIN rail DIN rail perforated - NS 32 PERF 2000MM - 1201002 DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015 DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     12/22/2019   Page 5 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     12/22/2019   Page 6 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     12/22/2019   Page 7 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     12/22/2019   Page 8 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     12/22/2019   Page 9 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-UDK 4 - 2775113 End cover, length: 63.5 mm, width: 1.5 mm, height: 35.9 mm, color: gray     Insertion bridge Insertion bridge - EB 3- 6 - 0201142 Insertion bridge, pitch: 6.2 mm, number of positions: 3, color: gray     12/22/2019   Page 10 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Insertion bridge - EB 2- 6 - 0201155 Insertion bridge, pitch: 6.2 mm, number of positions: 2, color: gray     Insertion bridge - EB 10- 6 - 0201139 Insertion bridge, pitch: 6.2 mm, number of positions: 10, color: gray     Insulating sleeve Bridge bar isolator - IS-K 4 - 1302338 Bridge bar isolator, color: gray     Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     12/22/2019   Page 11 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     12/22/2019   Page 12 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Partition plate Separating plate - TS-KK 3 - 2770215 Separating plate, length: 14 mm, width: 0.5 mm, height: 16 mm, color: gray     Screw bridge Jumper - ISSBI 10- 6 - 0301505 Jumper, pitch: 6 mm, number of positions: 10, color: silver     Jumper - LB 10-6 BU - 0202280 Jumper, pitch: 6 mm, number of positions: 10, color: blue     12/22/2019   Page 13 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Jumper - LB 10-6 RD - 0202293 Jumper, pitch: 6 mm, number of positions: 10, color: red     Jumper - LB 10-6 GY - 0202358 Jumper, pitch: 6 mm, number of positions: 10, color: gray     Jumper - LB 100-6 GY - 0202345 Jumper, pitch: 6 mm, number of positions: 100, color: gray     Jumper - LB 100-6 RD - 0202316 Jumper, number of positions: 100, color: red     Jumper - LB 100-6 BU - 0202303 Jumper, number of positions: 100, color: blue     12/22/2019   Page 14 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Fixed bridge - FBI 100- 6 - 0201650 Fixed bridge, pitch: 6.2 mm, number of positions: 100, color: silver     Fixed bridge - FBI 10- 6 - 0203250 Fixed bridge, pitch: 6.2 mm, number of positions: 10, color: silver     Fixed bridge - FBI 20- 6 - 0201867 Fixed bridge, pitch: 6.2 mm, number of positions: 20, color: silver     Short-circuit connector Short-circuit connector - KSS 3- 6 - 0309523 Short-circuit connector, pitch: 6 mm, number of positions: 3, color: black     Short-circuit connector - KSS 6 - 0301547 Short-circuit connector, pitch: 6 mm, number of positions: 2, color: black     12/22/2019   Page 15 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Switching jumper Switching jumper - SBRN 2-7 - 1413230 Switching jumper, pitch: 7 mm, number of positions: 2, color: silver     Switching jumper - USBR 2-7 - 2303239 Switching jumper, pitch: 7 mm, number of positions: 2, color: silver     Switching jumper - USBRJ 2-7 - 2305538 Switching jumper, number of positions: 2, color: silver     Terminal marking Marker card - SBS 6:UNBEDRUCKT - 1007222 Marker card, Card, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm, Number of individual labels: 250     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     12/22/2019   Page 16 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Test plug terminal block Reducing plug - RPS - 0201647 Reducing plug, color: gray     Test socket Female test connector - PSBJ 3/13/4 - 0201304 Female test connector, color: silver     12/22/2019   Page 17 / 18 https://www.phoenixcontact.com/us/products/2775281 Feed-through terminal block - UDK 4-DIO-Z 2,7V/L-R/P-P - 2775281 Accessories Female test connector - PSB 3/10/4 - 0601292 Female test connector, color: silver     Warning label printed Warning label - WS 3- 6 - 1004115 Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 6 mm     Warning label - WS 5- 6 - 1004403 Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 6 mm     Warning label - WS 4- 6 - 1004209 Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 6 mm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 12/22/2019   Page 18 / 18