2799445

PSM-LWL-HCSO-200/230 HCS Optical Fiber Cable HCS Optical Fiber Cable For Permanent Outdoor Installation co m Order No. 27 99 44 5 s. 1. Technical Data nt Fiber Type Attenuation at 650 nm ne 200/230 µm step index fiber ≤ 10.0 dB/km (0°C to +70°C [+32°F to +158°F]) ≤ 15.0 dB/km (-20°C to 0°C [-4°F to +32°F]) ≤ 8.0 dB/km (0°C to +70°C [+32°F to +158°F]) ≤ 12 dB/km (-20°C to 0°C [-4°F to +32°F]) ≥ 17 MHz/km at 650 nm ≥ 20 MHz/km at 850 nm 0.37 Attenuation at 850 nm po Bandwidth length production om Numerical aperture Single Element in ec Material Color Conductor diameter Strain relief elements Bending radius on l Twisting Short period Permanent Outer Cable Sheath Material Color Diameter Rodent protection Longitudinal water tightness Marking 2 full wires for direct connection of fiber optic connectors Copolymer (FRNC), flame-retardant, halogen-free Red/green 2.9 mm ±0.1 mm (0.114 in. ±0.004 in.) (for 3 mm [0.118 in.] crimping) Non-metal, aramide yarn 30 mm (1.181 in.), minimum 50 mm (1.969 in.), minimum 2 single elements and 2 dummy elements twisted around an FRP core and wrapped with fleece Tearing wire Polyethylene (PE) Black 11 mm (0.433 in.) Glass-fibre yarn By swelling material PHOENIX CONTACT FOC L (Date MM/YY) AT-VQH(B)2Y 2K200/230 10A17 + 8B20 LG and ID length specification in m 2 tearing wires under the outer cable sheath Weight 90 kg/km Temperature Range Installation Operation Storage -5˚C ... +50˚C (+23˚F ... +122˚F) -20˚C ... +70˚C (-4˚F ... +158˚F) -25˚C ... +70˚C (-13˚F ... +158˚F) Headquarters: © Phoenix Contact GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany Phone +49 - 52 35 - 30 0 • Fax +49 - 52 35 - 34 12 00 • http://www.phoenixcontact.com Local contact: www.phoenixcontact.com/salesnetwork PSM-LWL-HCSO-200/230 HCS Optical Fiber Cable 2. Mechanical Cable Properties According to EN 187 000 Bending radius Procedure 513, Test Type 1 Tensile strength Procedure 501 Lateral pressure Procedure 504 Impact strength Procedure 505 Longitudinal water tightness Procedure 605 Short period Permanent Short period Permanent Short period Permanent 150 mm (5.906 in.) 200 mm (7.874 in.) 1500 N, minimum 500 N, minimum 500 N/cm, minimum 300 N/cm, minimum 1.5 Nm/3 impacts, minimum 1 m (3.28 ft.) cable, 1 m (3.281 ft.) water column, 24 hours m 3. Material Properties Resistance to oil, benzene, acid, and lyes Free of substances, which would hinder coating with paint or varnish according to central standard P-VW 3.10.7 57650 of VW, Audi, and Seat IEC 60 754-2 A1:1997 DIN 53 387, Procedure 1, Condition A 1.68 MJ/m (0.47 kWh/m) No toxic or corrosive combustion gases co Resistance to oil Chloroform test nt s. Free of halogen UV resistance Fire load Combustion gases ne 4. Structure po Tearing wires Blindelement PE PE dummy element Außenmantel PE PE outer cable sheath Zentrales Stützelement om Central support element F-SMA - quick mounting connector for HCS fibers Set consists of 4 connectors PSM-SET-FSMA/4-HCS Order No. 27 99 48 7 Connector mounting set PSM-HCS-KONFTOOL Order No. 27 99 52 6 PHOENIX CONTACT page 2 of 2 TNR: 5087921-01 5. Recommended Connectors 01.03.99 Quellflies Swelling fleece ∀ PHOENIX CONTACT Glass-fibre yarn rodent protection Glasgarne alsforNagetierschutz on l in ec Aramidgarn als Zugentlastung Aramide yarn for strain relief http://www.phoenixcontact.com Faser Coating Wire withmit coating