2800106

https://www.phoenixcontact.com/us/products/2800106 Lightning arrester type 1 - FLT 25-400 - 2800106 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Type 1 / Class I / B arrester (lightning current arrester) with arc chopping spark gap, 1-channel. Housing width: 17.5 mm (1 Div.) Product Features  High discharge capacity  Single-channel   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 180.0 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 90 mm Width 17.7 mm Depth 65.5 mm Horizontal pitch 1 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % General IEC power supply system TN-S 12/02/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/2800106 Lightning arrester type 1 - FLT 25-400 - 2800106 Technical data General TN-C TT Housing material PA 6.6 Flammability rating according to UL 94 V-0 Color black Standards for cearances and creepage distances EN 60664-1 EN 61643-11 Mounting type DIN rail: 35 mm Type Rail-mountable module, one-piece Number of positions 1 Surge protection fault message None Direction of action 1L-N/PE Protective circuit IEC test classification I T1 EN type T1 Nominal voltage UN 230/400 V AC (TN) Maximum continuous operating voltage UC (L-PEN) 440 V AC UT (TOV-proof) 440 V (5 sec.) TOV behavior at UT Nominal frequency fN 50 Hz (60 Hz) Rated load current IL 80 A Residual current IPE ≤ 0.1 mA Standby power consumption PC ≤ 44 mVA Nominal discharge current In (8/20) µs (L-PEN) 25 kA Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 5 kV Voltage protection level Up (L-PEN) ≤ 5 kV Response time tA (L-PE) ≤ 100 ns Max. backup fuse with branch wiring 250 A AC (gG) Max. backup fuse with V-type through wiring 80 A AC (gG) Short-circuit resistance IP with max. backup fuse (effective) 25 kA Short-circuit current rating ISCCR 2.5 kA Follow current quenching capacity Ifi (L-PEN) 2.5 kA Connection, protective circuit Connection method Screw connection Connection type IN Biconnect screw terminal block 12/02/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/2800106 Lightning arrester type 1 - FLT 25-400 - 2800106 Technical data Connection, protective circuit Connection type OUT Biconnect screw terminal block Connection method Biconnect terminal block Screw thread M5 Tightening torque 4.5 Nm Stripping length 14.5 mm Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 25 mm² Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 35 mm² AWG conductor cross section 6 ... 2 Standards and Regulations Standards/regulations IEC 61643-11 2011 EN 61643-11 2012 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27140201 eCl@ss 5.0 27140201 eCl@ss 5.1 27140201 eCl@ss 6.0 27140201 eCl@ss 7.0 27140201 eCl@ss 8.0 27130802 ETIM ETIM 2.0 EC000381 ETIM 3.0 EC000381 ETIM 4.0 EC000381 ETIM 5.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 12/02/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/2800106 Lightning arrester type 1 - FLT 25-400 - 2800106 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings Dimensional drawing 90 Circuit diagram 17,7 L/N ( ) 58 65,5 L/N ( ) Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/02/2015   Page 4 / 4