2800183

https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV, with remote indication contact. Product Features ■ ■ ■ ■ ■ ■ Plugs can be checked with CHECKMASTER With or without floating remote indication contact Secure hold of plugs in the event of high lightning current loads and strong vibrations thanks to new latching Optical, mechanical status indication for the individual arresters Thermal disconnect device for each individual plug Mechanical coding of all slots Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 660.0 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 99 mm Width 71.2 mm Depth 77.5 mm Horizontal pitch 4 Div. Ambient conditions 03/08/2016   Page 1 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Technical data Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (half sinus / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General Standards/specifications IEC 61643-11 2011 EN 61643-11 2012 IEC test classification I / II T1 / T2 T1 EN type T1 / T2 T1 IEC power supply system TT TN-S Number of ports One SPD design Combination type Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color jet black RAL 9005 Housing material PA 6.6 PBT Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 240/415 V AC (TN-S) 240/415 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-N) 335 V AC 03/08/2016   Page 2 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Technical data Protective circuit Maximum continuous operating voltage UC (L-PE) 335 V AC Maximum continuous voltage UC (N-PE) 264 V AC Rated load current IL 80 A Residual current IPE ≤ 5 µA Standby power consumption PC ≤ 810 mVA Nominal discharge current In (8/20) µs (L-N) 12.5 kA Nominal discharge current In (8/20) µs (L-PE) 12.5 kA Nominal discharge current In (8/20) µs (N-PE) 50 kA Maximum discharge current Imax (8/20) µs 50 kA Impulse discharge current (10/350) µs (L-N), charge 6.25 As Impulse discharge current (10/350) µs (L-N), specific energy 39 kJ/Ω Impulse discharge current (10/350) µs (L-N), peak current value Iimp 12.5 kA Impulse discharge current (10/350) µs (L-PE), charge 6.25 As Impulse discharge current (10/350) µs (L-PE), specific energy 39 kJ/Ω Impulse discharge current (10/350) µs (L-PE), peak current value Iimp 12.5 kA Impulse discharge current (10/350) µs (N-PE), charge 25 As Impulse discharge current (10/350) µs (N-PE), specific energy 625 kJ/Ω Impulse discharge current (10/350) µs (N-PE), peak current value Iimp 50 kA Total discharge current ITotal (8/20) µs 50 kA Total discharge current ITotal (10/350) µs 50 kA Follow current interrupt rating Ifi (N-PE) 100 A (264 V AC) Short-circuit current rating ISCCR 25 kA Voltage protection level Up (L-N) ≤ 1.2 kV ≤ 1.6 kV (30 kA - 8/20µs) Voltage protection level Up (L-PE) ≤ 2 kV Voltage protection level Up (N-PE) ≤ 1.7 kV Residual voltage Ures (L-N) ≤ 1.2 kV (at In) ≤ 1.1 kV (at 10 kA) ≤ 1 kV (at 5 kA) ≤ 0.9 kV (at 3 kA) Residual voltage Ures (L-PE) ≤ 2 kV (at In) ≤ 1.5 kV (at 10 kA) ≤ 1.2 kV (at 5 kA) ≤ 1.1 kV (at 3 kA) Residual voltage Ures (N-PE) ≤ 0.6 kV (at In) 03/08/2016   Page 3 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Technical data Protective circuit ≤ 0.5 kV (at 10 kA) ≤ 0.5 kV (at 5 kA) ≤ 0.4 kV (at 3 kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs (N-PE) ≤ 1.7 kV TOV behavior at UT (L-N) 415 V AC (5 s / withstand mode) 457 V AC (120 min / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode) Response time tA (L-N) ≤ 25 ns Response time tA (L-PE) ≤ 100 ns Response time tA (N-PE) ≤ 100 ns Max. backup fuse with branch wiring 160 A (gG) Max. backup fuse with V-type through wiring 80 A (gG - 16 mm²) Indicator/remote signaling Connection name Remote fault indicator contact Switching function PDT contact Operating voltage 5 V AC ... 250 V AC 30 V DC Operating current 5 mA AC ... 1.5 A 1A Connection method Screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 28 ... 16 Connection data Connection method Screw connection Conductor cross section flexible 1.5 mm² ... 25 mm² Conductor cross section solid 1.5 mm² ... 35 mm² Conductor cross section AWG 15 ... 2 Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm 03/08/2016   Page 4 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Technical data UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-L) 670 V AC Maximum continuous operating voltage MCOV (L-N) 335 V AC Maximum continuous operating voltage MCOV (L-G) 335 V AC Maximum continuous operating voltage MCOV (N-G) 264 V AC Nom. voltage 240/415 V AC Mode of protection L-L L-N L-G N-G Power distribution system 3Y Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-L) 3570 V Measured limiting voltage MLV (L-N) 2630 V Measured limiting voltage MLV (L-G) 3600 V Measured limiting voltage MLV (N-G) 2600 V Nominal discharge current In (L-L) 20 kA Nominal discharge current In (L-N) 20 kA Nominal discharge current In (L-G) 20 kA Nominal discharge current In (N-G) 20 kA UL indicator/remote signaling Operating voltage 125 V AC Operating current 1A Tightening torque 4 lbf-in. Conductor cross section AWG 30 ... 14 UL connection data Conductor cross section AWG 10 ... 2 Tightening torque 30 lbf-in. Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 03/08/2016   Page 5 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Classifications eCl@ss eCl@ss 5.1 27130801 eCl@ss 6.0 27130802 eCl@ss 7.0 27130802 eCl@ss 8.0 27130802 eCl@ss 9.0 27130802 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000381 ETIM 5.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals KEMA-KEUR / ÖVE / CCA / IECEE CB Scheme / GL / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details KEMA-KEUR  03/08/2016   Page 6 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Approvals ÖVE  CCA  IECEE CB Scheme  GL  UL Recognized  cUL Recognized  EAC  EAC  cULus Recognized  Drawings 03/08/2016   Page 7 / 8 https://www.phoenixcontact.com/us/products/2800183 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 335/12.5/3+1FM - 2800183 Dimensional drawing Circuit diagram 22,5 11 FM 70 77,5 45 14 12 99 L2 L3 N 51,5 L1 Application drawing F2* F2* F1 L1 L2 L3 N PE F2* F1 L1 L2 L3 N PE Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/08/2016   Page 8 / 8