https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Lightning current arrester with encapsulated N-PE spark gap, single-channel. Housing width: 35 mm (2 pitches)
Your advantages
With ignition electronics
Direct parallel connection with type 2 arresters supported
Encapsulated and triggered
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356535236
Weight per Piece (excluding packing)
380.000 g
Custom tariff number
85363010
Country of origin
Germany
Technical data
Dimensions
Height
90 mm
Width
35.6 mm
Depth
71.2 mm (incl. DIN rail 7.5 mm)
Horizontal pitch
2 Div.
Ambient conditions
Degree of protection
IP20 (only when all terminal points are used)
06/27/2020 Page 1 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 80 °C
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Altitude
≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)
5 % ... 95 %
Shock (operation)
25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)
5g (5 - 500 Hz/2.5 h/X, Y, Z)
General
IEC test classification
I
T1
EN type
T1
IEC power supply system
TN-S
TT
Mode of protection
N-PE
Mounting type
DIN rail: 35 mm
Color
jet black RAL 9005
Housing material
PBT
Degree of pollution
2
Flammability rating according to UL 94
V-0
Type
DIN rail module, two-section, divisible
Number of positions
1
Surge protection fault message
none
Protective circuit
Nominal voltage UN
240 V AC (TN - only N-PE)
240 V AC (TT - only N-PE)
Nominal frequency fN
50 Hz (60 Hz)
Maximum continuous voltage UC
260 V AC
Rated load current IL
125 A (< 55 °C)
Residual current IPE
≤ 0.01 mA
Nominal discharge current In (8/20) µs
100 kA
Impulse discharge current (10/350) µs, charge
50 As
Impulse discharge current (10/350) µs, specific energy
2500 kJ/Ω
Impulse discharge current (10/350) µs, peak value limp
100 kA
Follow current interrupt rating Ifi
100 A (260 V AC)
Voltage protection level Up
≤ 1.5 kV
Residual voltage Ures
≤ 1.5 kV (at In)
≤ 1 kV (at 10 kA)
06/27/2020 Page 2 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Technical data
Protective circuit
≤ 0.9 kV (at 5 kA)
≤ 0.8 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs
≤ 1.5 kV
TOV behavior at UT
1200 V AC (200 ms / withstand mode)
Response time tA
≤ 100 ns
Connection data
Connection method
Screw terminal blocks
Screw thread
M5
Tightening torque
4.5 Nm
Stripping length
18 mm
Conductor cross section flexible
2.5 mm² ... 25 mm²
Conductor cross section solid
2.5 mm² ... 35 mm²
Conductor cross section AWG
13 ... 2
Standards and Regulations
Standards/regulations
IEC 61643-11 2011
EN 61643-11 2012
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
06/27/2020 Page 3 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Circuit diagram
06/27/2020 Page 4 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Dimensional drawing
Classifications
eCl@ss
eCl@ss 10.0.1
27130802
eCl@ss 4.0
27130800
eCl@ss 4.1
27130800
eCl@ss 5.0
27130800
eCl@ss 5.1
27130800
eCl@ss 6.0
27130800
eCl@ss 7.0
27130802
eCl@ss 8.0
27130802
eCl@ss 9.0
27130802
ETIM
ETIM 2.0
EC000381
ETIM 3.0
EC000381
ETIM 4.0
EC000381
ETIM 5.0
EC000381
ETIM 6.0
EC000381
ETIM 7.0
EC000381
UNSPSC
UNSPSC 6.01
30212010
UNSPSC 7.0901
39121610
06/27/2020 Page 5 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Classifications
UNSPSC
UNSPSC 11
39121610
UNSPSC 12.01
39121610
UNSPSC 13.2
39121620
UNSPSC 18.0
39121620
UNSPSC 19.0
39121620
UNSPSC 20.0
39121620
UNSPSC 21.0
39121620
Approvals
Approvals
Approvals
CCA / KEMA-KEUR / IECEE CB Scheme / EAC
Ex Approvals
Approval details
CCA
NTR-NL 7734
KEMA-KEUR
http://www.dekra-certification.com
71-108169
IECEE CB Scheme
http://www.iecee.org/
NL-58250
EAC
RU CDE.A*30.B01561
Accessories
Accessories
Bridge
06/27/2020 Page 6 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Accessories
Wiring bridge - MPB 18/1- 8 BU - 2858470
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos., color: Blue
Device marking
Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
Labeled device marker
Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
06/27/2020 Page 7 / 8
https://www.phoenixcontact.com/us/products/2800303
Combination type 1/2 protective device - FLT 100 N/PE-1.5 - 2800303
Accessories
Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589
Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Spare parts
Type 1 surge protection plug - FLT 100 N/PE-1.5-ST - 2800304
Type 1/Class I/B arrester (lightning current arrester) replacement plug for N-PE path.
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/27/2020 Page 8 / 8
