2800627

https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protective device for 2-pos. isolated and grounded 1,000 V DC PV systems, for DIN rail mounting, 3-pos. base element with remote indication contact, three pluggable temperature-monitored protective elements, status message on each plug. Your advantages  Increased safety, thanks to compliance with standard EN 50539-11  Reliable contact, thanks to integrated rotating latch  Easy replacement, thanks to plug-in arresters  Optimum inverter protection, thanks to low protection level  Efficient replacement of defective plugs, thanks to visual status indicator  Protection against mismatching, thanks to keyed plugs and base elements  Optimized maintenance planning, thanks to remote signaling Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356615075 Weight per Piece (excluding packing) 360.000 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 98.7 mm Width 53.4 mm Depth 65.7 mm (incl. DIN rail 7.5 mm) 04/19/2021   Page 1 / 7 https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Technical data Dimensions Horizontal pitch 3 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 7.5g (5-500 Hz/2.5 h/XYZ) General IEC test classification PV II PV T2 EN type T2 SPD failure behavior OCM (Open-circuit mode) Connection configuration Y configuration Installation location Interior Accessibility Accessible Installation location of the disconnect device Internal Mode of protection (L+) - (L-) (L+) - PE (L-) - PE Mounting type DIN rail: 35 mm Color jet black RAL 9005 Housing material PA 6.6-FR PBT-FR Degree of pollution 2 Distance between live and grounded parts 8 mm Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Surge protection fault message Optical, remote indicator contact Additional descriptions Note The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area. Protective circuit DC voltage side (DC) Maximum continuous operating voltage UCPV 1170 V DC 04/19/2021   Page 2 / 7 https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Technical data Protective circuit DC voltage side (DC) Short-circuit current rating ISCPV 2000 A Continuous operating current ICPV < 20 µA Rated load current IL 80 A Residual current IPE ≤ 20 µA DC ≤ 250 µA AC Standby power consumption PC ≤ 25 mVA Nominal discharge current (8/20) µs 15 kA Maximum discharge current Imax (8/20) µs 40 kA Total discharge current Itotal (8/20) µs 40 kA Voltage protection level Up ≤ 3.7 kV Residual voltage Ures ≤ 3.7 kV (at In) ≤ 3.1 kV (at 5 kA) ≤ 3.5 kV (at 10 kA) ≤ 4 kV (at 20 kA) ≤ 4.6 kV (at 30 kA) ≤ 5 kV (at 40 kA) Response time tA ≤ 25 ns Insulation resistance Riso > 5 GΩ (at 500 V DC) Indicator/remote signaling Switching function Changeover contact Operating voltage 5 V AC ... 250 V AC 30 V DC Operating current 5 mA AC ... 1.5 A AC 1 A DC Connection method Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 28 ... 16 Connection data Connection method Screw connection Screw thread M5 Tightening torque 3 Nm (1.5 mm² ... 16 mm²) 4.5 Nm (25 mm² ... 35 mm²) 04/19/2021   Page 3 / 7 https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Technical data Connection data Stripping length 16 mm Conductor cross section flexible 1.5 mm² ... 25 mm² Conductor cross section solid 1.5 mm² ... 35 mm² Conductor cross section AWG 15 ... 2 Connection method Fork-type cable lug Conductor cross section flexible 1.5 mm² ... 16 mm² UL specifications SPD Type 1CA Maximum continuous operating voltage MCOV 1170 V DC Nominal voltage 1170 V DC Mode of protection (L+) - (L-) (L+) - G (L-) - G Power distribution system DC PV Voltage protection rating VPR 3 kV Nominal discharge current In 10 kA Short-circuit current rating (SCCR) 50 kA UL indicator/remote signaling Operating voltage 125 V AC Operating current 1 A AC Tightening torque 4 lbf-in. Conductor cross section AWG 30 ... 14 UL connection data Conductor cross section AWG 10 ... 2 Tightening torque 30 lbf-in. Standards and Regulations Standards/regulations EN 50539-11 2013 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 04/19/2021   Page 4 / 7 https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Dimensional drawing Circuit diagram 12 98,7 65,7 14 11 FM 53,4 44 89,8 L+ L– Classifications eCl@ss eCl@ss 10.0.1 27130805 eCl@ss 11.0 27130805 eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130805 eCl@ss 9.0 27130805 ETIM ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 6.0 EC000941 ETIM 7.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 UNSPSC 18.0 39121620 UNSPSC 19.0 39121620 UNSPSC 20.0 39121620 UNSPSC 21.0 39121620 Approvals Approvals 04/19/2021   Page 5 / 7 https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Approvals Approvals UL Recognized / KEMA-KEUR / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 330181 KEMA-KEUR    http://www.dekra-certification.com  71-102960 REV.1 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 330181 EAC      RU CDE.*09.B.00169 cULus Recognized       Accessories Accessories Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     04/19/2021   Page 6 / 7 https://www.phoenixcontact.com/us/products/2800627 Type 2 surge arrester - VAL-MS 1000DC-PV/2+V-FM - 2800627 Accessories Labeled device marker Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589 Marker for terminal blocks, Strip, white, labeled, horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576 Marker for terminal blocks, Strip, white, labeled, horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Spare parts Type 2 surge protection plug - VAL-MS 1000DC-PV-ST - 2800624 Replacement plug for PV arrester combinations from the VAL-MS 1000DC-PV-... product range     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 04/19/2021   Page 7 / 7