2800672

https://www.phoenixcontact.com/us/products/2800672 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 175/12.5/3+0FM - 2800672 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with common N and PE (4-conductor system: L1, L2, L3, PEN), with remote indication contact. Product Features  With or without floating remote indication contact  Plugs can be checked with CHECKMASTER  Secure hold of plugs in the event of high lightning current loads and strong vibrations thanks to new latching  Optical, mechanical status indication for the individual arresters  Mechanical coding of all slots  Thermal disconnect device for each individual plug     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 480.0 GRM Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 99 mm Width 53.4 mm Depth 77.5 mm Horizontal pitch 3 Div. Ambient conditions 09/10/2014   Page 1 / 6 https://www.phoenixcontact.com/us/products/2800672 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 175/12.5/3+0FM - 2800672 Technical data Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C General IEC power supply system TN-C Housing material PBT / PA Inflammability class according to UL 94 V0 Color black Standards for air and creepage distances EN 60664-1 EN 61643-11 Mounting type DIN rail: 35 mm Type DIN rail module, two-section, divisible Number of positions 3 Surge protection fault message Optical, remote indicator contact Direction of action 3L-PEN Protective circuit IEC test classification I / II T1 / T2 EN type T1 / T2 Nominal voltage UN 120 V AC Maximum continuous operating voltage UC 175 V AC Maximum continuous operating voltage UC (L-PEN) 175 V AC UT (TOV-proof) 208 V AC (5 s/L-PEN) Nominal frequency fN 50 Hz (60 Hz) Rated load current IL 80 A (with serial 16mm² through wiring) Residual current IPE ≤ 800 µA Standby power consumption PC ≤ 140 mVA Max. discharge current Imax (8/20) µs maximum (L-PEN) 150 kA (3 x L) 50 kA Nominal discharge current In (8/20) µs (L-PEN) 37.5 kA (3 x L) 12.5 kA Impulse discharge current (10/350) µs charge 18.75 As Impulse discharge current (10/350)˽µs, specific energy 352 kJ/Ω Impulse discharge current (10/350)˽µs, peak value limp 37.5 kA Impulse discharge current (10/350) µs charge 6.25 As 09/10/2014   Page 2 / 6 https://www.phoenixcontact.com/us/products/2800672 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 175/12.5/3+0FM - 2800672 Technical data Protective circuit Impulse discharge current (10/350)˽µs, specific energy 39 kJ/Ω Impulse discharge current (10/350)˽µs, peak value limp 12.5 kA (1-pos.) Voltage protection level Up ≤ 0.8 kV Voltage protection level Up (L-PEN) ≤ 0.7 kV Residual voltage (L-PEN) ≤ 0.7 kV (at 10 kA) ≤ 0.6 kV (at 5 kA) ≤ 0.55 kV (at 3 kA) ≤ 0.8 kV Response time ≤ 25 ns Response time (L-PEN) ≤ 25 ns Max. backup fuse with branch wiring 160 A (gL/gG) Max. backup fuse with V-type through wiring 80 A (gL/gG / with 16 mm²) Short-circuit resistance IP with max. backup fuse (effective) 25 kArms Connection, protective circuit Connection method Screw connection Connection type IN Biconnect screw terminal block Connection type OUT Biconnect screw terminal block Connection method Biconnect terminal block Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm Conductor cross section stranded min. 1.5 mm² Conductor cross section stranded max. 25 mm² Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG/kcmil min. 15 Conductor cross section AWG/kcmil max 2 Remote indicator contact Connection name Remote fault indicator contact Switching function PDT, 1-pos. Connection method Screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section stranded min. 0.14 mm² 09/10/2014   Page 3 / 6 https://www.phoenixcontact.com/us/products/2800672 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 175/12.5/3+0FM - 2800672 Technical data Remote indicator contact Conductor cross section stranded max. 1.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG/kcmil min. 28 Conductor cross section AWG/kcmil max 16 Maximum operating voltage Umax. AC 250 V AC Max. operating current Imax 1.5 A AC (250 V AC) 1.5 A DC (30 V DC) Standards and Regulations Standards/regulations IEC 61643-1 2005 EN 61643-11/A11 2007 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130802 eCl@ss 7.0 27130802 eCl@ss 8.0 27130802 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000381 ETIM 5.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 09/10/2014   Page 4 / 6 https://www.phoenixcontact.com/us/products/2800672 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 175/12.5/3+0FM - 2800672 Approvals Approvals Approvals KEMA-KEUR / GL / UL Recognized / cUL Recognized / ÖVE / CCA / IECEE CB Scheme / cULus Recognized Ex Approvals Approvals submitted Approval details KEMA-KEUR  GL  UL Recognized  cUL Recognized  ÖVE  CCA  IECEE CB Scheme  09/10/2014   Page 5 / 6 https://www.phoenixcontact.com/us/products/2800672 Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 175/12.5/3+0FM - 2800672 Approvals cULus Recognized  Drawings Dimensioned drawing Circuit diagram 99 12 22,5 11 14 PEN PEN FM 70 77,5 45 L2 L3 51,5 L1 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/10/2014   Page 6 / 6