2800744

https://www.phoenixcontact.com/us/products/2800744 Type 2 surge protection plug - VAL-US 690 ST - 2800744 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 690 V AC The figure shows the VAL-US 347 ST version Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 64.0 GRM Custom tariff number 85363090 Country of origin Germany Technical data Dimensions Height 52.4 mm Width 17.7 mm Depth 54.5 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C General Housing material PA 6.6 Inflammability class according to UL 94 V0 Color black Standards for air and creepage distances EN 60664-1 EN 61643-11 Mounting type On base element Design Male 2/4/14   Page 1 / 5 https://www.phoenixcontact.com/us/products/2800744 Type 2 surge protection plug - VAL-US 690 ST - 2800744 Technical data General Number of positions 1 Surge protection fault message Optical Direction of action 1L-N/PE Protective circuit IEC test classification II T2 EN type T2 Nominal voltage UN 690 V AC Maximum continuous operating voltage UC 750 V AC UT (TOV-proof) 1000 V AC (5 s) Nominal frequency fN 60 Hz (50 Hz) Residual current IPE ≤ 300 µA Standby power consumption PC ≤ 230 mVA Max. discharge current Imax (8/20) µs 30 kA Nominal discharge current In (8/20) µs 15 kA Voltage protection level Up ≤ 2.7 kV Residual voltage ≤ 2.7 kV ≤ 2.6 kV (at 10 kA) ≤ 2.4 kV (at 5 kA) ≤ 2.3 kV (at 3 kA) Response time ≤ 25 ns Max. required backup fuse with branch wiring 100 A (gL / gG) Short-circuit resistance IP with max. backup fuse (effective) 25 kA Standards and Regulations Standards/regulations IEC 61643-1 EN 61643-11/A11 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130803 eCl@ss 7.0 27130803 2/4/14   Page 2 / 5 https://www.phoenixcontact.com/us/products/2800744 Type 2 surge protection plug - VAL-US 690 ST - 2800744 Classifications eCl@ss eCl@ss 8.0 27130803 ETIM ETIM 3.0 EC000472 ETIM 4.0 EC000472 ETIM 5.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  2/4/14   Page 3 / 5 https://www.phoenixcontact.com/us/products/2800744 Type 2 surge protection plug - VAL-US 690 ST - 2800744 Approvals cULus Recognized  Accessories Accessories Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Labeled device marker Zack marker strip - ZBN 18,LGS:ERDE - 2749589 Zack marker strip, Strip, white, labeled, Horizontal: Grounding symbol, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Zack marker strip - ZBN 18,LGS:L1-N,ERDE - 2749576 Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     2/4/14   Page 4 / 5 https://www.phoenixcontact.com/us/products/2800744 Type 2 surge protection plug - VAL-US 690 ST - 2800744 Accessories Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 2/4/14   Page 5 / 5