2800903

https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Electronic device circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element. The figure shows the CB E1 24DC/1A NO P version Why buy this product  Compact design with precise nominal current levels  Modular expansion possible thanks to the uniform, plug-in housing concept  Sophisticated remote signaling concept enables monitoring from any location  N/O contact for remote signaling of the operating state  Active current limitation, even when switching capacitive loads  Supply/remote signaling can be bridged with CLIPLINE complete accessories   Key commercial data Packing unit 0 Minimum order quantity 1 GTIN Custom tariff number 85363010 Country of origin GERMANY Technical data General Installation instructions When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor). Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC). Parallel connection of multiple circuit breakers is not permitted. Height 45 mm Width 12.3 mm Depth 52 mm Höhe Komplettmodul 90 mm 18.01.2013   Page 1 / 8 https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Technical data General Breite Komplettmodul 12.3 mm Tiefe Komplettmodul 77.3 mm Ambient temperature (operation) 0 °C ... 50 °C (without condensation) Ambient temperature (storage/transport) -20 °C ... 70 °C Degree of protection IP30 (Actuation area) Mounting type On base element Color gray Number of positions 1 Pollution degree 2 Design Male Technical data Fuse type Electronic Rated surge voltage 0.5 kV Operating voltage 24 V DC Operating voltage 18 V DC ... 30 V DC Nominal current IN 3A Kontaktart des Hilfskontaktes potenzialfreier Signalkontakt minimale Betriebsspannung Hilfskontakt 10 V DC maximale Betriebsspannung Hilfskontakt 30 V DC minimaler Betriebsstrom Hilfskontakt 10 mA maximaler Betriebsstrom Hilfskontakt 0.5 A Tripping method E (electronic) Required backup fuse (not required, integrated failsafe element) Dielectric strength max. 30 V DC (Load circuit) Voltage drop 120 mV (at IN) Switch off typ. 1.25 x IN Current limitation active Contact type Without electrical isolation Closed circuit current I0 Typ. 8 mA (When switched on) Closed circuit current I0 Typ. 17 mA (With alarm output) Standards Standard - Electrical safety UL 2367 Standard - Electrical safety UL 508 Standard - Electrical safety CSA 22.2 No. 14 Standard - Electrical safety EMV EN 61000-6-3 Noise emission Standard - Electrical safety EMV EN 61000-6-2 Noise immunity Classifications ETIM ETIM 3.0 EC000899 18.01.2013   Page 2 / 8 https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Classifications ETIM ETIM 4.0 EC000899 ETIM 5.0 EC000899 UNSPSC UNSPSC 11 39121411 UNSPSC 12.01 39121411 UNSPSC 13.2 39121411 UNSPSC 6.01 30211812 UNSPSC 7.0901 39121411 eCl@ss eCl@ss 4.0 27141116 eCl@ss 4.1 27141116 eCl@ss 5.0 27141116 eCl@ss 5.1 27141116 eCl@ss 6.0 27141116 eCl@ss 7.0 27141116 Accessories Accessories Bridges Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, Number of positions: 4, Color: red     18.01.2013   Page 3 / 8 https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Accessories Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, Number of positions: 5, Color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, Number of positions: 20, Color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, Number of positions: 50, Color: red     Marking Zack Marker strip, flat - ZBF 12:UNBEDRUCKT - 0809735 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 12 mm, Lettering field: 5.15 x 12.15 mm     18.01.2013   Page 4 / 8 https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Accessories Zack Marker strip, flat - ZBF 12 CUS - 0825018 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 12 mm, Lettering field: 5.15 x 12.15 mm     Tools Cable-cutting tool - CUTFOX-FBS - 1212124 Cutting tool, for separating individual jumper bars from FBS ... plug-in bridges and EB ... insertion bridges     Jumper - CB PT BRIDGE - 2801014 Bridge plugs for the CB 1/6-2/4 PT-BE base element     Additional products Base element - CB 1/6-2/4 PT-BE - 2800929 Base element with push-in connection technology for CB ... device circuit breakers     Drawings 18.01.2013   Page 5 / 8 https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Diagram 1000 Tiempo de conmutación [s] 100 10 1 0,1 0,01 0 1 2 3 Múltiplos de IN Trigger characteristic 18.01.2013   Page 6 / 8 https://www.phoenixcontact.com/us/produkte/2800903 Electronic device circuit breaker - CB E1 24DC/3A NO P - 2800903 Dimensioned drawing 90 12,3 40,7 77,3 45 The figure shows the complete module consisting of a base element and connector 18.01.2013   Page 7 / 8 https://www.phoenixcontact.com/us/produkte/2800903 © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 18.01.2013   Page 8 / 8