2800913

https://www.phoenixcontact.com/us/products/2800913 Electronic device circuit breaker - CB E1 24DC/8A S-R P - 2800913 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element. The figure shows the CB E1 24DC/1A S-R P version Product Features  Compact design with precise nominal current levels  Modular expansion possible thanks to the uniform, plug-in housing concept  Sophisticated remote signaling concept enables monitoring from any location  The reset input can be switched by means of remote control  Active current limitation, even when switching capacitive loads  Supply/remote signaling can be bridged with CLIPLINE complete accessories   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 50.0 g Custom tariff number 85362010 Country of origin Germany Technical data Dimensions Height 45 mm Width 12.3 mm Depth 52 mm Ambient conditions Ambient temperature (operation) -25 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Humidity test 96 h, 95% RH, 40°C 10/29/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/2800913 Electronic device circuit breaker - CB E1 24DC/8A S-R P - 2800913 Technical data Ambient conditions Degree of protection IP30 (Actuation area) General Flammability rating according to UL 94 V0 Mounting type On base element Color gray Number of positions 1 Pollution degree 2 Type Male Electrical data Fuse type Electronic Rated surge voltage 0.5 kV Operating voltage 24 V DC 18 V DC ... 30 V DC Nominal current IN 8A Rated insulation voltage Ui 30 V (Load circuit) Required backup fuse not required, integrated failsafe element Active current limitation typ. 1.25 x IN Contact type Without electrical isolation Closed circuit current I0 typ. 8 mA (When switched on) typ. 11 mA (With status output) Temperature derating 7.2 A (at 50°C) Tripping method E (electronic) Dielectric strength max. 30 V DC (Load circuit) Voltage drop 100 mV (at IN) Contact type Without electrical isolation Shutdown time load circuit 100 ms (see time/current characteristic curve) Max. capacitive load load circuit 20000 µF Output voltage status output 24 V DC Output current status output max. 0.2 A (Short-circuit-proof) Input voltage reset input max. 30 V DC Current consumption reset input typ. 2.6 mA (at 24 V DC) Auxiliary type of contact Positive-switching signal output Standards and Regulations Standards/specifications UL 2367 UL recognized UL 508 UL/C-UL listed EMV EN 61000-6-3 Noise emission 10/29/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/2800913 Electronic device circuit breaker - CB E1 24DC/8A S-R P - 2800913 Technical data Standards and Regulations EMV EN 61000-6-2 Noise immunity Classifications eCl@ss eCl@ss 4.0 27141116 eCl@ss 4.1 27141116 eCl@ss 5.0 27141116 eCl@ss 5.1 27141116 eCl@ss 6.0 27141116 eCl@ss 7.0 27141116 eCl@ss 8.0 27141116 ETIM ETIM 3.0 EC000899 ETIM 4.0 EC000899 ETIM 5.0 EC000899 UNSPSC UNSPSC 6.01 30211812 UNSPSC 7.0901 39121411 UNSPSC 11 39121411 UNSPSC 12.01 39121411 UNSPSC 13.2 39121411 Approvals Approvals Approvals UL Recognized / GL / UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approvals submitted 10/29/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/2800913 Electronic device circuit breaker - CB E1 24DC/8A S-R P - 2800913 Approvals Approval details UL Recognized  GL  UL Listed  cUL Listed  EAC  cULus Listed  Drawings Circuit diagram GND (b) RShunt IC Failsafe LINE 24 V DC (1) Reset IN+ (a) Status OUT (c) Load (2) 10/29/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/2800913 Electronic device circuit breaker - CB E1 24DC/8A S-R P - 2800913 Application drawing Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 10/29/2015   Page 5 / 5