2801263

https://www.phoenixcontact.com/us/products/2801263 Surge protection device - PT-IQ-2X2-24DC-PT - 2801263 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Product Features ■ ■ ■ ■ ■ ■ ■ ■ ■ Surge protection system Multi-level state monitoring Collective message about supply and remote module System supplied via DIN rail bus Up to 28 protection modules per supply module Maximum ease of maintenance thanks to the two-piece design Codable plug Impedance-neutral disconnection of plug for maintenance purposes Base element remains an integral part of the installation Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 160.0 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 109.3 mm Width 17.7 mm Depth 77.5 mm Horizontal pitch 1 Div. 03/14/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2801263 Surge protection device - PT-IQ-2X2-24DC-PT - 2801263 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 General Housing material PA 6.6 Flammability rating according to UL 94 V-0 Color jet black RAL 9005 Mounting type DIN rail: 35 mm Type DIN rail module, two-section, divisible Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/ShieldEarth Ground Additional descriptions Note Remote signaling as well as the power supply of the T-BUS are established by snapping the module onto the T-BUS. Protective circuit IEC test classification C1 C2 C3 D1 Nominal voltage UN 24 V DC Maximum continuous voltage UC 30 V DC 21 V AC Nominal current IN 700 mA (50 °C) Operating effective current IC at UC ≤ 1 mA (in the signal circuit) Residual current IPE ≤ 2 µA (per signal circuit) Nominal discharge current In (8/20) µs (Core-Core) 10 kA Nominal discharge current In (8/20) µs (Core-Earth) 10 kA Pulse discharge current Iimp (10/350) µs (core-ground) 2.5 kA Total surge current (8/20) µs 20 kA Impulse discharge current (10/350)˽µs, peak value limp 2.5 kA Voltage protection level Up (core-core) ≤ 80 V (C1 - 1 kV/500 A) ≤ 130 V (C2 - 10 kV / 5 kA) ≤ 55 V (C3 - 25 A) ≤ 60 V (C3 - 100 A) Voltage protection level Up (core-ground) ≤ 600 V (C1 - 1 kV/500 A) ≤ 750 V (C2 - 10 kV / 5 kA) 03/14/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2801263 Surge protection device - PT-IQ-2X2-24DC-PT - 2801263 Technical data Protective circuit ≤ 700 V (C3 - 25 A) ≤ 800 V (C3 - 100 A) Voltage protection level Up static (core-core) ≤ 65 V (C1 - 1 kV/500 A) Voltage protection level Up static (core-ground) ≤ 60 V (C2 - 10 kV / 5 kA) ≤ 40 V (C3 - 25 A) ≤ 100 V (C3 - 100 A) Response time tA (Core-Core) ≤ 1 ns Response time tA (Core-Earth) ≤ 100 ns Input attenuation aE, sym. typ. 0.3 dB (≤ 270 kHz/150 Ω) Cut-off frequency fg (3 dB), sym. in 150 Ohm system typ. 1.1 MHz Capacity (Core-Core) typ. 2 nF Resistance in series 1.2 Ω ±5 % Surge protection fault message Optical, multi-stage Max. required back-up fuse 800 mA (FF) Impulse durability (conductor-conductor) C1 - 1 kV/500 A C2 - 10 kV/5 kA C2 - 10 kA C3 - 100 A Impulse durability (conductor-ground) C1 - 1 kV/500 A C2 - 10 kV/5 kA C2 - 10 kA C3 - 100 A D1 - 2,5 kA Pulse reset time (conductor-conductor) ≤ 4000 ms Pulse reset time (conductor-ground) ≤ 2600 ms Connection data Connection method Push-in connection Connection type IN Push-in connection Connection type OUT Push-in connection Stripping length 10 mm Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 03/14/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2801263 Surge protection device - PT-IQ-2X2-24DC-PT - 2801263 Technical data Connection, equipotential bonding Connection method NS 35 DIN rail or connection terminal block Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130807 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 eCl@ss 9.0 27130807 ETIM ETIM 3.0 EC000943 ETIM 4.0 EC000943 ETIM 5.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / EAC / CSA / CSAus / cCSAus Ex Approvals Approvals submitted 03/14/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2801263 Surge protection device - PT-IQ-2X2-24DC-PT - 2801263 Approvals Approval details UL Listed  EAC  CSA  CSAus  cCSAus  Drawings Dimensional drawing 800 109,3 600 45 17,7 7,8 400 0 30 35 40 45 50 55 60 65 70 T [°C] 77,5 200 75 51,6 I [mA] Diagram Circuit diagram 2 1 ! ! ! 5 6 3 4 9 10 unprotected protected 7 8 ! ! 11 ! 12 03/14/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2801263 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 6 / 6