2804610

https://www.phoenixcontact.com/us/products/2804610 Surge protection device - LIT 1X2-24 - 2804610 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection in the one-piece 6.2 mm DIN rail module for one floating signal circuit in 2-wire technology. Tested according to the protection types in Ex areas Ex ia IIC/Ex iaD. HART-compatible. Product Features  Can be used in binary, analog, and intrinsically safe circuits  Protection of up to four signal wires over a design width of 6.2 mm         Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 60.0 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 93 mm Width 6.2 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Degree of protection IP20 General Housing material PBT 02/09/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2804610 Surge protection device - LIT 1X2-24 - 2804610 Technical data General Flammability rating according to UL 94 V-0 Color black Standards for cearances and creepage distances IEC 60664-1 EN 60079-11 Mounting type DIN rail: 35 mm Type Rail-mountable module, one-piece Direction of action Line-Line & Line-Earth Ground Protective circuit IEC test classification C1 C2 C3 D1 Nominal voltage UN 24 V DC Maximum continuous voltage UC 25 V AC 36 V DC Nominal current IN 350 mA (40°C) Operating effective current IC at UC ≤ 2 µA Standby power consumption PC ≤ 970 mVA Residual current IPE ≤ 2 µA Nominal discharge current In (8/20) µs (Core-Core) 5 kA Nominal discharge current In (8/20) µs (Core-Earth) 5 kA 10 kA (Total) Total surge current (8/20) µs 20 kA Total surge current (10/350) µs 1 kA Max. discharge current Imax (8/20) µs maximum (Core-Core) 10 kA Max. discharge current Imax (8/20) µs maximum (Core-Earth) 10 kA 20 kA (Total) Nominal pulse current Ian (10/1000) µs (Core-Core) 50 A Nominal pulse current Ian (10/1000) µs (Core-Earth) 50 A 100 A (Total) Impulse discharge current (10/350)˽µs, peak value limp 500 A Output voltage limitation at 1 kV/µs (Core-Core) spike ≤ 60 V Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 650 V Residual voltage at In (conductor-conductor) ≤ 70 V Residual voltage with Ian (10/1000)µs (conductor-conductor) ≤ 50 V Voltage protection level Up (core-core) ≤ 70 V (C2 - 10 kV / 5 kA) 02/09/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2804610 Surge protection device - LIT 1X2-24 - 2804610 Technical data Protective circuit ≤ 50 V (C3 - 10 A) ≤ 80 V (D1 - 500 A) Voltage protection level Up (core-ground) ≤ 650 V (C1 - 500 V / 250 A) ≤ 700 V (C2 - 10 kV / 5 kA) ≤ 700 V (D1 - 500 A) Response time tA (Core-Core) ≤ 1 ns Response time tA (Core-Earth) ≤ 100 ns Input attenuation aE, sym. typ. 0.7 dB (1 MHz / 50 Ω) typ. 0.3 dB (350 kHz / 150 Ω) Cut-off frequency fg (3 dB), sym. in 50 Ohm system typ. 6 MHz Cut-off frequency fg (3 dB), sym. in 150 Ohm system typ. 2 MHz Capacity ≤ 1.3 nF (per channel) Resistance in series 3.3 Ω 20 % Max. required back-up fuse 315 mA Impulse durability (conductor-conductor) C2 - 10 kV/5 kA C3 - 25 A Impulse durability (conductor-ground) C2 - 10 kV/5 kA C3 (25 A) D1 (500 A) Alternating current carrying capacity (conductor-ground) 5A-1s Connection data Connection method Screw connection Connection type IN Screw terminal blocks Connection type OUT Screw terminal blocks Screw thread M3 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Connection, equipotential bonding Connection method DIN rail NS35 Standards and Regulations Standards/regulations IEC 61643-21 02/09/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2804610 Surge protection device - LIT 1X2-24 - 2804610 Technical data Standards and Regulations DIN EN 61643-21 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130807 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 ETIM ETIM 2.0 EC000943 ETIM 3.0 EC000943 ETIM 4.0 EC000943 ETIM 5.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / GL / EAC / EAC Ex Approvals IECEx / ATEX / INMETRO 02/09/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2804610 Surge protection device - LIT 1X2-24 - 2804610 Approvals Approvals submitted Approval details UL Listed  GL  EAC  EAC  Drawings Application drawing Field Application drawing protected Non-Ex area Ex area Controller 0-20mA LIT 1X2... LINETRAB IN OUT IN OUT Galvanic isolator barrier Grounding Dimensional drawing 102,5 93,1 Circuit diagram 6,2 IN 7 OUT 8 5 6 3 4 1 2 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 02/09/2016   Page 5 / 5