2810230

https://www.phoenixcontact.com/us/products/2810230 Repeater power supply - MINI MCR-SL-RPSS-I-I-SP - 2810230 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with springcage connection. The figure shows a version with a screw connection Product Features  Power supply possible via the foot element (TBUS)  Bidirectional HART transmission as an option  Can also be used as an isolator without supply  Supply of 2-wire and passive 3-wire sensors  3-way isolation  Highly-compact repeater power supplies for electrical isolation, amplification, and filtering of standard analog signals         Key commercial data Packing unit 1 pc Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm 10/17/2014   Page 1 / 6 https://www.phoenixcontact.com/us/products/2810230 Repeater power supply - MINI MCR-SL-RPSS-I-I-SP - 2810230 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Description of the input Current input (sensor circuit) Current input signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Input resistance current input approx. 50 Ω Transmitter supply voltage 16.5 V Output data Output name Current output Current output signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. output current > 21 mA (22.5 mA, typical) Load/output load current output ≤ 500 Ω (at I = 20 mA) Transmission Behavior 1:1 to input signal Power supply Nominal supply voltage 24 V DC Supply voltage range 20.4 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Power consumption < 900 mW (at 24 V DC and in repeater power supply operation) < 600 mW (at 24 V DC and in isolator operation) Connection data Connection method Spring-cage connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Stripping length 8 mm General Maximum transmission error ≤ 0.2 % (of final value) Transmission error, typical ≤ 0.1 % (of final value) Maximum temperature coefficient < 0.005 %/K 10/17/2014   Page 2 / 6 https://www.phoenixcontact.com/us/products/2810230 Repeater power supply - MINI MCR-SL-RPSS-I-I-SP - 2810230 Technical data General Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) 175 Hz (typ.) Step response (10-90%) < 2 ms (typ.) Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Surge voltage category II Pollution degree 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized applied for Class I, Div. 2, Groups A, B, C, D T5 applied for GL GL EMC 2 D Data communication (bypass) Limit frequency (3 dB) approx. 2.5 Hz EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 3% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 3% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 3% 10/17/2014   Page 3 / 6 https://www.phoenixcontact.com/us/products/2810230 Repeater power supply - MINI MCR-SL-RPSS-I-I-SP - 2810230 Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 ETIM ETIM 2.0 EC001485 ETIM 3.0 EC001485 ETIM 4.0 EC001485 ETIM 5.0 EC001485 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals GL Ex Approvals ATEX Approvals submitted Approval details GL  10/17/2014   Page 4 / 6 https://www.phoenixcontact.com/us/products/2810230 Repeater power supply - MINI MCR-SL-RPSS-I-I-SP - 2810230 Drawings Application drawing Application drawing Sensor 4...20mA 1 IN I PWR OUT 2 GND1 3 GND1 4 OUT I 1 5 UB GND2 2 6 Control system UB + 3 7 GND3 4 8 24V MINI MCR-SL-RPSS-I-I IN I PWR OUT GND1 GND1 OUT I 5 GND2 6 Control system UB + 7 GND3 8 24V MINI MCR-SL-RPSS-I-I Mains voltage Mains voltage Isolator operation with an active sensor Repeater power supply operation with a passive sensor Application drawing Block diagram OUT I Actuator 1 2 IN I PWR OUT OUT I 5 GND2 OUT IN Sensor / Field 1 – 1 IN I PWR 2 IN 6 OUT I 5 + 5 active 2-wire UB PLC / DCS + 2 PWR OUT passive GND 2 6 6 – OUT I 3 Control system 4 GND1 GND1 UB + GND3 7 3-wire 8 1 PWR 2 IN 3 GND OUT I 24V MINI MCR-SL-RPSS-I-I US – 3 – 4 GND 1 +24V GND 1 7 + GND 3 8 – 1 4-wire Mains voltage GND 3 +24V GND 3 Zone 2 Isolator operation at the analog output module Dimensioned drawing 6,2 102,5 93,1 10/17/2014   Page 5 / 6 https://www.phoenixcontact.com/us/products/2810230 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/17/2014   Page 6 / 6