2810625

Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Current measuring transducer for 1 A and 5 A AC, the output signal 0...20 mA or 4...20 mA, can be configured using a DIP switch with an operating mode indication through an LED Product Description The MACX MCR-SL-CAC-5-I(-UP) current measuring transducers convert sinusoidal alternating currents of 1 A or 5 A into standard analog signals 0...20 mA or 4...20 mA. The DIP switches, which can be accessed on the upper side of the housing, can be used to configure the input and output current. The MACX MCR-SL-CAC-5-I current transducer contains a supply voltage range of 19.2 V DC to 30 V DC. The MACX MCR-SL-CAC-5-I current transducer contains a long range version with a supply voltage range of 19.2 V AC/DC to 253 V AC/DC. Your advantages • Input/output can be configured via DIP switches Commercial Data Item number 2810625 Packing unit 1 pc Minimum order quantity 1 pc Sales Key C04 Product Key CK4A21 Catalog Page Page 234 (C-5-2019) GTIN 4046356153782 Weight per Piece (including packing) 223.9 g Weight per Piece (excluding packing) 181.6 g Customs tariff number 85437090 Country of origin DE Oct 27, 2022, 6:49 PM Page 1 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Technical Data Notes Utilization restriction EMC note EMC: class A product, see manufacturer's declaration in the download area Product properties Product type Current transducer Insulation characteristics Overvoltage category III Pollution degree 2 Electrical properties Maximum power dissipation for nominal condition < 0.9 W (24 V DC) < 3.4 W (230 V AC) Protective circuit Surge protection; 35 V suppressor diode Step response (10-90%) ≤ 300 ms 200 ms Maximum temperature coefficient < 0.02 %/K Temperature coefficient, typical < 0.015 %/K Maximum transmission error ≤ 0.5 % (of nominal range value under nominal conditions) Reverse polarity protection yes Rated insulation voltage 300 V AC (to earth) Electrical isolation Input/output Test voltage 4 kV AC (50 Hz, 60 s) Electrical isolation Output/supply Test voltage 2 kV AC (50 Hz, 60 s) Supply Supply voltage range 19.2 V AC/DC ... 253 V AC/DC Max. current consumption < 33 mA (24 V DC) Power consumption < 0.8 W (24 V DC) Input data Measurement Configurable/programmable Via DIP switches Input current range 0 A AC ... 1 A AC (configurable) 0 A AC ... 5 A AC (configurable) Voltage input signal ≤ 300 V AC Input impedance < 50 mΩ Overload capacity 2 x IN (continuous) Oct 27, 2022, 6:49 PM Page 2 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Surge strength 20 x IN (1 s) Nominal frequency fN 50 Hz Frequency measuring range 45 Hz ... 65 Hz Curve type Sine Output data Signal: Current Configurable/programmable Via DIP switches Non-load voltage 15 V Current output signal 0 mA ... 20 mA (configurable) 4 mA ... 20 mA (configurable) Max. current output signal 25 mA Load/output load current output < 500 Ω (20 mA) Ripple < 10 mVPP (500 Ω / 20 mA) Status display LED red (error), LED green (ready) Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 14 Interfaces Data communication (bypass) Limit frequency (3 dB) approx. 3 Hz Dimensions Dimensional drawing Width 22.5 mm Height 104 mm Depth 114.5 mm Material specifications Housing material Polyamide PA non-reinforced Environmental and real-life conditions Oct 27, 2022, 6:49 PM Page 3 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Ambient conditions Degree of protection IP20 Ambient temperature (operation) -20 °C ... 65 °C -4 °F ... 149 °F Ambient temperature (storage/transport) -40 °C ... 85 °C (-40 °F ... 185 °F) Altitude ≤ 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Approval data CE Certificate CE-compliant ATEX Identification II 3 G Ex nA IIC T4 Gc X UKCA Ex (UKEX) Identification Certificate II 3 G Ex nA IIC T4 Gc PxCIF21UKEX2810638X UL, USA / Canada Identification UL 508 Recognized EAC Ex Identification Certificate 2Ex nA IIC T4 Gc BY/112 02.01 TP012 103.01 00078 EMC data Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Note When being exposed to interference, there may be minimal deviations. Electrostatic discharge Standards/regulations EN 61000-4-2 Electromagnetic HF field Standards/regulations EN 61000-4-3 Electromagnetic HF field Comments Criterion A Fast transients (burst) Standards/regulations EN 61000-4-4 Fast transients (burst) Comments Criterion B Oct 27, 2022, 6:49 PM Page 4 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Surge current load (surge) Standards/regulations EN 61000-4-5 Surge current load (surge) Comments Criterion B Conducted interference Standards/regulations EN 61000-4-6 Mounting Mounting type DIN rail mounting Mounting position any Oct 27, 2022, 6:49 PM Page 5 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Drawings Dimensional drawing 22,5 7 114,5 104 Oct 27, 2022, 6:49 PM Page 6 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Application drawing 0...20mA 5A 24V 00 10 A Mains voltage Current measurement Oct 27, 2022, 6:49 PM Page 7 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Approvals  cUL Recognized  UL Recognized   Approval ID: FILE E 238705 Approval ID: FILE E 238705 EAC Ex Approval ID: RU C-DE.AB72.B.02066 ATEX Approval ID: 2810638_Ex-n cULus Recognized Oct 27, 2022, 6:49 PM Page 8 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Classifications ECLASS ECLASS-9.0 27210123 ECLASS-10.0.1 27210123 ECLASS-11.0 27210123 ETIM ETIM 8.0 EC002475 UNSPSC UNSPSC 21.0 39121000 Oct 27, 2022, 6:49 PM Page 9 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Oct 27, 2022, 6:49 PM Page 10 (11) Current transducers - MACX MCR-SL-CAC- 5-I-UP 2810625 https://www.phoenixcontact.com/us/products/2810625 Accessories DIN rail bus connectors DIN rail bus connectors - ME 22,5 TBUS 1,5/ 5-ST-3,81 GY - 2201937 https://www.phoenixcontact.com/us/products/2201937 DIN rail connector, color: gray, nominal current: 8 A (parallel contacts), rated voltage (III/2): 125 V, number of positions: 5, pitch: 3.81 mm, mounting: DIN rail mounting, locking: without, mounting: without, type of packaging: packed in cardboard, Item with gold-plated contacts, bus connectors for connecting with electronics housings, 5 parallel contacts Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 27, 2022, 6:49 PM Page 11 (11)