2811446

Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the front, over 1600 signal conversions can be set. Standard configuration (IN 0 ... 10 V/OUT 0 ... 20 mA), screw connection, SIL. Your advantages • Power supply possible via DIN rail connector • Over 1600 signal conversions can be set via DIP switches on the front • Installation in zone 2 permitted • Up to SIL 2 in accordance with EN 61508 • 3-way electrical isolation • Analog signal conditioner for isolating, filtering, amplifying, and converting standard analog signals • Configurable input and output signals, including bipolar current and voltage signals • 10 kHz limit frequency for time-critical applications • Status indicator for supply voltage • Active or passive output • Plug-in screw or spring-cage connection technology (Push-in technology) Commercial Data Item number 2811446 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key C01 Product Key CK1111 Catalog Page Page 116 (C-5-2019) GTIN 4046356288927 Weight per Piece (including packing) 178.05 g Weight per Piece (excluding packing) 150 g Customs tariff number 85437090 Country of origin DE Oct 27, 2022, 7:03 PM Page 1 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Technical Data Product properties Product type Signal conditioner No. of channels 1 Type Signal conditioners with SIL functional safety Configuration DIP switches Insulation characteristics Overvoltage category II Pollution degree 2 Electrical properties Alignment span ±4% Alignment zero ±4% No. of channels 1 Rated insulation voltage 300 V AC Electrical isolation between input and output yes Limit frequency (3 dB) 10 kHz (Can be switched to 30 Hz) Maximum power dissipation for nominal condition < 0.7 W (20 mA) Protective circuit Transient protection Step response (10-90%) 35 µs (10 kHz) 11 ms (30 Hz) Maximum temperature coefficient 0.0075 %/K Maximum transmission error ≤ 0.1 % (Compared to the final value) Electrical isolation Input/output/power supply Rated insulation voltage 300 Vrms Test voltage 2.5 kV AC (50 Hz, 60 s) Insulation Safe isolation in accordance with IEC/EN 61010-1 Supply Supply voltage range 12 V DC ... 24 V DC (-20 % ... +25 %) Power dissipation 500 mW (at 24 V DC / 20 mA) Power consumption ≤ 700 mW Input data Signal: Voltage/current Number of inputs 1 Voltage input signal 0 mV ... 50 mV 0 mV ... 60 mV 0 mV ... 75 mV 0 mV ... 100 mV 0 mV ... 120 mV Oct 27, 2022, 7:03 PM Page 2 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 0 mV ... 150 mV 0 mV ... 200 mV 0 mV ... 300 mV 0 mV ... 500 mV 0 V ... 1 V 0 V ... 1.5 V 0 V ... 2 V 0 V ... 3 V 0 V ... 5 V 0 V ... 10 V (Configurable via DIP switches) 0 V ... 15 V 0 V ... 20 V 0 V ... 30 V 0 V ... 50 V 0 V ... 100 V -50 mV ... 50 mV -60 mV ... 60 mV -75 mV ... 75 mV -100 mV ... 100 mV -120 mV ... 120 mV -150 mV ... 150 mV -200 mV ... 200 mV -300 mV ... 300 mV -500 mV ... 500 mV -1 V ... 1 V -1.5 V ... 1.5 V -2 V ... 2 V -3 V ... 3 V -5 V ... 5 V -10 V ... 10 V -15 V ... 15 V -20 V ... 20 V -30 V ... 30 V -50 V ... 50 V -100 V ... 100 V 1 V ... 5 V 2 V ... 10 V Min. voltage input signal ± 50 mV Max. voltage input signal ± 100 V Current input signal 0 mA ... 1 mA (Configurable via DIP switches) 0 mA ... 1.5 mA 0 mA ... 2 mA 0 mA ... 3 mA 0 mA ... 5 mA Oct 27, 2022, 7:03 PM Page 3 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 0 mA ... 10 mA 0 mA ... 15 mA 0 mA ... 20 mA 0 mA ... 30 mA 0 mA ... 50 mA 0 mA ... 100 mA -1 mA ... 1 mA -1.5 mA ... 1.5 mA -2 mA ... 2 mA -3 mA ... 3 mA -5 mA ... 5 mA -10 mA ... 10 mA -15 mA ... 15 mA -20 mA ... 20 mA -30 mA ... 30 mA -50 mA ... 50 mA -100 mA ... 100 mA 1 mA ... 5 mA 2 mA ... 10 mA 4 mA ... 20 mA Minimum current input signal ± 1 mA Max. current input signal ± 100 mA Input resistance of voltage input approx. 1 MΩ (±1 V DC ...  ±100 V DC) Input resistance current input approx. 10 Ω (± 10 mA DC ... ± 100 mA DC) Output data Signal: Voltage/current Number of outputs 1 Configurable/programmable Yes, can be switched Voltage output signal 0 V ... 10 V (Configurable via DIP switches) 0 V ... 5 V 2 V ... 10 V 1 V ... 5 V -10 V ... 10 V -5 V ... 5 V 0 V ... 2.5 V 0.5 V ... 2.5 V -2.5 V ... 2.5 V Output signal voltage inverse 0 V ... 2.5 V 0 V ... 5 V 0 V ... 10 V Current output signal 0 mA ... 5 mA 0 mA ... 10 mA Oct 27, 2022, 7:03 PM Page 4 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 0 mA ... 20 mA (Configurable via DIP switches) 1 mA ... 5 mA 2 mA ... 10 mA 4 mA ... 20 mA -5 mA ... 5 mA -10 mA ... 10 mA -20 mA ... 20 mA Output signal current inverse 0 mA ... 5 mA 0 mA ... 10 mA 0 mA ... 20 mA Load/output load voltage output ≥ 1 kΩ (10 V) Load/output load current output ≤ 600 Ω (20 mA; active) passive: ≤ (UB-2 V) / Ioutmax Ripple < 10 mVrms Connection data Connection method Screw connection Stripping length 7 mm Screw thread M3 Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 14 Dimensions Dimensional drawing Width 12.5 mm Height 112.5 mm Depth 113.7 mm Depth NS 35/7,5 114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715) Material specifications Housing material PA 6.6-FR Environmental and real-life conditions Ambient conditions Degree of protection IP20 (not assessed by UL) Ambient temperature (operation) -20 °C ... 70 °C Oct 27, 2022, 7:03 PM Page 5 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Ambient temperature (storage/transport) -40 °C ... 85 °C Approval data CE Certificate CE-compliant ATEX Identification Certificate II 3 G Ex ec IIC T4 Gc BVS 10 ATEX E 059 X UKCA Ex (UKEX) Identification Certificate II 3 G Ex nA IIC T4 Gc PxCIF21UKEX2811284X IECEx Identification Ex ec IIC T4 Gc Certificate IECEx BVS 10.0044X CCC / China-Ex Identification Ex ec IIC T4 Gc Certificate 2021122304114077 UL, USA / Canada Identification UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC Shipbuilding approval Certificate DNV GL TAA000020C Safety Integrity Level (SIL, IEC 61508) Identification 2 INMETRO Identification Ex ec IIC T4 Gc Certificate DNV 21.0063 X EAC Ex Identification Certificate 2Ex ec IIC T4 Gc BY/112 02.01 TP012 103.01 00078 DNV GL data Temperature B Humidity B Vibration A EMC A Enclosure Required protection according to the Rules shall be provided upon installation on board Oct 27, 2022, 7:03 PM Page 6 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 EMC data Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Note When being exposed to interference, there may be minimal deviations. Electromagnetic HF field Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 1% Fast transients (burst) Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 1% Conducted interference Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 1% Standards and regulations GB Standard Standards/regulations GB 3836.1 GB 3836.3 Mounting Mounting type DIN rail mounting Mounting position any Oct 27, 2022, 7:03 PM Page 7 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Drawings Dimensional drawing 116 (SP) 112,5 12,5 7 114,5 99 Oct 27, 2022, 7:03 PM Page 8 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Block diagram US 4-wire [mA] 4.1 5.2 4.2 4.1 US US 4-wire [mV] 4-wire [V] OUT IN Sensor / Field 4.2 5.2 5.2 5.1 PLC / DCS ±50 mV... ±1000 mV ±1 mA... ±5 mA - active ±10 mA... ±100 mA GND + passive ±1 V... ±100 V GND 5.1 +24 V 5.2 3.1 3.2 passive + 3.1 2.2 2.2 2.1 active 2.1 3.2 1.2 + 1.1 GND +24 V Zone 2 Div. 2 Oct 27, 2022, 7:03 PM Page 9 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Approvals  DNV GL  UL Listed Approval ID: TAA000020C Approval ID: FILE E 330267 CCC  Approval ID: 2021122304114077 cUL Listed  Approval ID: FILE E 330267 Functional Safety Approval ID: BVS Pb 01/10  IECEx Approval ID: IECEx BVS 10.0044X  cUL Listed  UL Listed Approval ID: FILE E 199827 Approval ID: FILE E 199827  ATEX Approval ID: BVS 10 ATEX E059 X INMETRO Approval ID: DNV 21.0063 X  EAC Ex Approval ID: TP012 103.01 00078 cULus Listed Oct 27, 2022, 7:03 PM Page 10 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 cULus Listed Oct 27, 2022, 7:03 PM Page 11 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Classifications ECLASS ECLASS-9.0 27210120 ECLASS-10.0.1 27210120 ECLASS-11.0 27210120 ETIM ETIM 8.0 EC002653 UNSPSC UNSPSC 21.0 39121000 Oct 27, 2022, 7:03 PM Page 12 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Oct 27, 2022, 7:03 PM Page 13 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Accessories DIN rail bus connectors DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439 https://www.phoenixcontact.com/us/products/2695439 DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715 Power and error message module Power and error message module - MACX MCR-PTB - 2865625 https://www.phoenixcontact.com/us/products/2865625 Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector Oct 27, 2022, 7:03 PM Page 14 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Power and error message module Power and error message module - MACX MCR-PTB-SP - 2924184 https://www.phoenixcontact.com/us/products/2924184 Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector Power supply unit Power supply unit - QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614 https://www.phoenixcontact.com/us/products/2904614 Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A Oct 27, 2022, 7:03 PM Page 15 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Module carrier Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 https://www.phoenixcontact.com/us/products/2902932 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection Module carrier Module carrier - TC-D37SUB-ADIO16-EX-P-UNI - 2924854 https://www.phoenixcontact.com/us/products/2924854 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection) Oct 27, 2022, 7:03 PM Page 16 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 https://www.phoenixcontact.com/us/products/0201663 Insulating sleeve, color: white Insulating sleeve Insulating sleeve - MPS-IH RD - 0201676 https://www.phoenixcontact.com/us/products/0201676 Insulating sleeve, color: red Oct 27, 2022, 7:03 PM Page 17 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Insulating sleeve Insulating sleeve - MPS-IH BU - 0201689 https://www.phoenixcontact.com/us/products/0201689 Insulating sleeve, color: blue Insulating sleeve Insulating sleeve - MPS-IH YE - 0201692 https://www.phoenixcontact.com/us/products/0201692 Insulating sleeve, color: yellow Oct 27, 2022, 7:03 PM Page 18 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Insulating sleeve Insulating sleeve - MPS-IH GN - 0201702 https://www.phoenixcontact.com/us/products/0201702 Insulating sleeve, color: green Insulating sleeve Insulating sleeve - MPS-IH GY - 0201728 https://www.phoenixcontact.com/us/products/0201728 Insulating sleeve, color: gray Oct 27, 2022, 7:03 PM Page 19 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Insulating sleeve Insulating sleeve - MPS-IH BK - 0201731 https://www.phoenixcontact.com/us/products/0201731 Insulating sleeve, color: black Test plugs Test plugs - MPS-MT - 0201744 https://www.phoenixcontact.com/us/products/0201744 Test plugs, with solder connection up to 1 mm2 conductor cross section, color: gray Oct 27, 2022, 7:03 PM Page 20 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Plastic label Plastic label - UC-EMLP (11X9) - 0819291 https://www.phoenixcontact.com/us/products/0819291 Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Plastic label Plastic label - UC-EMLP (11X9) YE - 0822602 https://www.phoenixcontact.com/us/products/0822602 Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Oct 27, 2022, 7:03 PM Page 21 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Plastic label Plastic label - UC-EMLP (11X9) CUS - 0824547 https://www.phoenixcontact.com/us/products/0824547 Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm Plastic label Plastic label - UC-EMLP (11X9) YE CUS - 0824548 https://www.phoenixcontact.com/us/products/0824548 Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm Oct 27, 2022, 7:03 PM Page 22 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Plastic label Plastic label - UC-EMLP (11X9) SR - 0828094 https://www.phoenixcontact.com/us/products/0828094 Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Plastic label Plastic label - UC-EMLP (11X9) SR CUS - 0828098 https://www.phoenixcontact.com/us/products/0828098 Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Oct 27, 2022, 7:03 PM Page 23 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Plastic label Plastic label - US-EMLP (11X9) - 0828789 https://www.phoenixcontact.com/us/products/0828789 Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 Plastic label Plastic label - US-EMLP (11X9) YE - 0828871 https://www.phoenixcontact.com/us/products/0828871 Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 Oct 27, 2022, 7:03 PM Page 24 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Plastic label Plastic label - US-EMLP (11X9) SR - 0828872 https://www.phoenixcontact.com/us/products/0828872 Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 Device marker Device marker - LS-EMLP (11X9) WH - 0831678 https://www.phoenixcontact.com/us/products/0831678 Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Oct 27, 2022, 7:03 PM Page 25 (26) Signal conditioner - MACX MCR-UI-UI-NC 2811446 https://www.phoenixcontact.com/us/products/2811446 Device marker Device marker - LS-EMLP (11X9) SR - 0831705 https://www.phoenixcontact.com/us/products/0831705 Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Device marker Device marker - LS-EMLP (11X9) YE - 0831732 https://www.phoenixcontact.com/us/products/0831732 Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 27, 2022, 7:03 PM Page 26 (26)