2813473

https://www.phoenixcontact.com/us/products/2813473 Current transducers - MCR-SL-S-400-U - 2813473 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, output voltage 0...(5) 10 V Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 136.6 g Custom tariff number 85437090 Country of origin Japan Technical data Dimensions Width 55 mm Height 85 mm Depth 70.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Degree of protection IP20 Input data Input Current measuring input Input current range 0 A ... 400 A (0...200/300/400 A) Operate threshold 1 % (of final value) Setting range for min. input current 0 A ... 200 A Setting range for max. input current 0 A ... 400 A Overload capacity Depending on laid conductor Surge strength Depending on through connected conductor 04/27/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2813473 Current transducers - MCR-SL-S-400-U - 2813473 Technical data Input data Frequency measuring range 30 Hz ... 6000 Hz Connection method Clamp-on cable design, diameter 18.5 mm Output data Output name Voltage output Voltage output signal 0 V ... 10 V 0 V ... 5 V Max. output voltage (0 V ... 10 V) 14 V, (0 V ... 5 V) 7 V Load/output load voltage output ≥ 10 kΩ Switching output Output name No switching output Power supply Supply voltage range 20 V DC ... 30 V DC Max. current consumption < 30 mA Connection data Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 8 mm Screw thread M3 General Maximum transmission error < 1 % (of final value) Maximum temperature coefficient < 0.035 %/K Step response (10-90%) < 340 ms Overvoltage category III Degree of pollution 2 Rated insulation voltage 300 V AC (to earth) Test voltage input/output 5 kV (50 Hz, 1 min.) Color green Housing material Polyamide PA non-reinforced Mounting position any Conformance CE-compliant 04/27/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2813473 Current transducers - MCR-SL-S-400-U - 2813473 Technical data General UL, USA / Canada cULus Standards and Regulations Conformance CE-compliant UL, USA / Canada cULus Classifications eCl@ss eCl@ss 4.0 27200303 eCl@ss 4.1 27200303 eCl@ss 5.0 27200303 eCl@ss 5.1 27200303 eCl@ss 6.0 27200303 eCl@ss 7.0 27142316 eCl@ss 8.0 27210123 eCl@ss 9.0 27210123 ETIM ETIM 2.0 EC001440 ETIM 3.0 EC001440 ETIM 4.0 EC001440 ETIM 5.0 EC002475 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / EAC / cULus Listed 04/27/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2813473 Current transducers - MCR-SL-S-400-U - 2813473 Approvals Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed  cUL Listed  EAC  EAC  cULus Listed  Drawings Application drawing Dimensional drawing 383A + - 85 24V MCR-SL-S-...-U L1 0...5V 0...10V 70,5 Mains voltage 55 L2 L3 Current measurement 04/27/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2813473 Current transducers - MCR-SL-S-400-U - 2813473 Circuit diagram OUT GND IN OUT = = +24V Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/27/2016   Page 5 / 5