2813525

https://www.phoenixcontact.com/us/products/2813525 Signal conditioner - MINI MCR-SL-U-I-4 - 2813525 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0 V ... 10 V, output signal: 4 mA ... 20 mA Product Features ■ ■ ■ ■ ■ ■ Power supply possible via the foot element (TBUS) Entry-level alternative to configurable signal conditioners Low power consumption Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of standard analog signals Fixed signal combinations 3-way isolation Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 71.6 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm 05/16/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2813525 Signal conditioner - MINI MCR-SL-U-I-4 - 2813525 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude ≤ 2000 m Degree of protection IP20 Input data Number of inputs 1 Configurable/programmable no Voltage input signal 0 V ... 10 V Max. input voltage 30 V Input resistance of voltage input approx. 100 kΩ Output data Number of outputs 1 Configurable/programmable no Current output signal 4 mA ... 20 mA Max. output current 28 mA Load/output load current output ≤ 500 Ω Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 20 mA Power consumption < 450 mW Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 12 mm Screw thread M3 General No. of channels 1 Maximum transmission error ≤ 0.1 % (of final value) 05/16/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2813525 Signal conditioner - MINI MCR-SL-U-I-4 - 2813525 Technical data General Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) approx. 100 Hz Step response (10-90%) approx. 3.5 ms Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 applied for GL GL EMC 2 D EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5% Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Connection in acc. with standard CUL 05/16/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2813525 Signal conditioner - MINI MCR-SL-U-I-4 - 2813525 Technical data Standards and Regulations Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 applied for GL GL EMC 2 D Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 2.0 EC001485 ETIM 3.0 EC001485 ETIM 4.0 EC001485 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 05/16/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2813525 Signal conditioner - MINI MCR-SL-U-I-4 - 2813525 Approvals Approvals Approvals UL Recognized / cUL Recognized / GL / EAC / cULus Recognized Ex Approvals ATEX Approvals submitted Approval details UL Recognized  cUL Recognized  GL  EAC  cULus Recognized  Drawings 05/16/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2813525 Signal conditioner - MINI MCR-SL-U-I-4 - 2813525 Block diagram Dimensional drawing 93,1 1 + 1 IN U OUT I 5 + 5 active 4-wire GND 2 – 2 + 3 – 4 passive GND 2 GND 1 6 – +24V +24V GND 3 6,2 PLC / DCS 6 7 + GND 3 8 – 102,5 OUT U US OUT IN Sensor / Field +24V GND 3 Zone 2 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/16/2016   Page 6 / 6