Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage
connection, input signal: 0 mA...20 mA, output signal: 0 V...10 V. Replacement part: 2902001
MINI MCR-2-I0-U-PT.
Your advantages
• Power supply possible via the foot element (TBUS)
• Low power consumption
• Entry-level alternative to configurable signal conditioners
• Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of standard analog signals
• 3-way isolation
• Fixed signal combinations
Commercial Data
Item number
2813554
Packing unit
1 pc
Minimum order quantity
1 pc
Note
Made to Order (non-returnable)
Sales Key
C01
Product Key
CK1211
Catalog Page
Page 97 (C-7-2015)
GTIN
4046356101912
Weight per Piece (including packing)
79.1 g
Weight per Piece (excluding packing)
59 g
Customs tariff number
85437090
Country of origin
DE
Oct 27, 2022, 7:33 AM
Page 1 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Technical Data
Product properties
Product type
Signal conditioner
No. of channels
1
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
No. of channels
1
Rated insulation voltage
30 V AC
50 V DC
Electrical isolation
Basic insulation in accordance with EN 61010
Electrical isolation between input and output
yes
Limit frequency (3 dB)
approx. 100 Hz
Test voltage, input/output/supply
1.5 kV AC (50 Hz, 60 s)
Step response (10-90%)
3.5 ms
Maximum temperature coefficient
< 0.01 %/K
Temperature coefficient, typical
< 0.002 %/K
Maximum transmission error
≤ 0.1 % (of final value)
Supply
Nominal supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail in
accordance with EN 60715)
Max. current consumption
< 9 mA
Power consumption
< 200 mW
Input data
Signal:
Number of inputs
1
Configurable/programmable
no
Current input signal
0 mA ... 20 mA
Max. current input signal
50 mA
Input resistance current input
approx. 50 Ω
Output data
Signal:
Number of outputs
1
Configurable/programmable
no
Oct 27, 2022, 7:33 AM
Page 2 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Voltage output signal
0 V ... 10 V
Max. voltage output signal
12.5 V
Short-circuit current
approx. 2 mA
Load/output load voltage output
≥ 10 kΩ
Ripple
< 20 mVPP (at 10 kΩ)
Connection data
Connection method
Spring-cage connection
Stripping length
8 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Dimensions
Dimensional drawing
Width
6.2 mm
Height
93.1 mm
Depth
102.5 mm
Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Approval data
CE
Certificate
CE-compliant
ATEX
Oct 27, 2022, 7:33 AM
Page 3 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Identification
II 3 G Ex nA IIC T4 Gc X
UL, USA / Canada
Identification
UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T4
GL
Identification
GL EMC 2 D
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
deviations.
Electrostatic discharge
Comments
Safety measures must be taken to prevent electrostatic
discharge.
Electromagnetic HF field
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
5%
Fast transients (burst)
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Typical deviation from the measuring range final value
5%
Conducted interference
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
5%
Standards and regulations
Electrical isolation
Basic insulation in accordance with EN 61010
Mounting
Mounting type
DIN rail mounting
Assembly instructions
The DIN rail connector can be used for bridging the supply
voltage. It can be snapped onto a 35 mm EN 60715 DIN rail.
Mounting position
any
Oct 27, 2022, 7:33 AM
Page 4 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Drawings
Block diagram
IN
Sensor / Field
OUT I
US 4-wire
GND
1
OUT
+
2
2
–
+
–
4
3
1
IN I
GND 1
OUT U
active
GND 2
+24V
PLC / DCS
5
6
+24V
GND 3
5
+
GND 3
passive
6
–
7
+
8
–
+24V
GND 3
Oct 27, 2022, 7:33 AM
Page 5 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Dimensional drawing
6,2
102,5
93,1
Oct 27, 2022, 7:33 AM
Page 6 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Classifications
ECLASS
ECLASS-9.0
27210120
ECLASS-10.0.1
27210120
ECLASS-11.0
27210120
ETIM
ETIM 7.0
EC002653
Oct 27, 2022, 7:33 AM
Page 7 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:33 AM
Page 8 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Accessories
DIN rail bus connectors
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
https://www.phoenixcontact.com/us/products/2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Goldplated contacts, 5-pos.
Power terminal block
Power terminal block - MINI MCR-SL-PTB - 2864134
https://www.phoenixcontact.com/us/products/2864134
MCR power terminal block for supplying several MINI Analog modules via the
DIN rail connector, with screw connection, maximum current consumption of up
to 2 A
Oct 27, 2022, 7:33 AM
Page 9 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Power supply unit
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
https://www.phoenixcontact.com/us/products/2866983
Please use the following item in new systems: 2904614
Primary-switched MINI POWER power supply for DIN rail mounting, input: 1phase, output: 24 V DC/1.5 A
Transparent cover
Transparent cover - MINI MCR DKL - 2308111
https://www.phoenixcontact.com/us/products/2308111
Fold up transparent cover for MINI MCR modules with additional labeling option
using insert strips and flat Zack marker strip 6.2 mm
Oct 27, 2022, 7:33 AM
Page 10 (11)
Signal conditioner - MINI MCR-SL-I-U-0-SP
2813554
https://www.phoenixcontact.com/us/products/2813554
Marking label
Marking label - MINI MCR-DKL-LABEL - 2810272
https://www.phoenixcontact.com/us/products/2810272
Label for extended marking of MINI MCR modules in connection with the MINI
MCR-DKL
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:33 AM
Page 11 (11)
