2824190

https://www.phoenixcontact.com/us/products/2824190 Relay connectors - ST-REL3-KG 24/21AU - 2824190 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Relay connector, equipped with miniature switching relay, contacts (AgPd60): small loads, 1 PDT, input voltage 24 V AC/DC, with light indicator, can be plugged on basic termination blocks   Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 40.32 GRM Custom tariff number 85364190 Country of origin Germany Technical data Dimensions Width 20.8 mm Height 33 mm Depth 66.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 50 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Coil side Nominal input voltage UN 24 V AC/DC Input voltage range in reference to UN 0.8 ... 1.1 Typical input current at UN 21 mA Typical response time 7 ms Typical release time 11 ms (with DC) 10/20/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/2824190 Relay connectors - ST-REL3-KG 24/21AU - 2824190 Technical data Coil side Operating voltage display Yes Protective circuit Bridge rectifier, varistor Contact side Contact type Double contact, 1 PDT Contact material AgPd60, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Maximum inrush current 0.2 A Limiting continuous current 0.5 A Interrupting rating (ohmic load) max. 5 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 125 V AC Limiting continuous current 2A Maximum inrush current 2A Interrupting rating (ohmic load) max. 29 W (at 24 V DC) 29 W (at 48 V DC) 29 W (at 60 V DC) General Test voltage relay winding/relay contact 2.5 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life Approx. 2 x 10 cycles Standards/regulations DIN VDE 0110b, Gr. C for 250 V DC 7 IEC 60255/DIN VDE 0435 (in relevant parts) DIN EN 50178/DIN VDE 0160 (in relevant parts) EN 60730/DIN VDE 0631 DIN VDE 0160 (in relevant parts) DIN VDE 0110b, Gr. C for 250 V DC IEC 60255/DIN VDE 0435 (in relevant parts) DIN EN 50178/DIN VDE 0160 (in relevant parts) EN 60730/DIN VDE 0631 DIN VDE 0160 (in relevant parts) Classifications eCl@ss eCl@ss 4.0 27371104 10/20/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/2824190 Relay connectors - ST-REL3-KG 24/21AU - 2824190 Classifications eCl@ss eCl@ss 4.1 27371104 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC000196 ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC000196 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details GOST  10/20/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/2824190 Relay connectors - ST-REL3-KG 24/21AU - 2824190 Approvals GOST  Drawings Circuit diagram Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/20/2014   Page 4 / 4