2832726

https://www.phoenixcontact.com/us/products/2832726 Industrial Ethernet Switch - FL SWITCH SF 7TX/FX - 2832726 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ethernet Switch, 7 TP RJ45 ports, 1 FO port, 100 Mbps full duplex in SC-D format, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function Product Features ■ ■ ■ ■ ■ Auto negotiation and autocrossing detection simplifies installation and setup Security options with cable locking Relay contact for alarm processing of voltage states Local diagnostic indicators with LEDs RJ45 ports support a transmission speed of 10/100 Mbps; fiber optic ports support 100 Mbps Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 438.6 g Custom tariff number 85176200 Country of origin Taiwan Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 135 mm Height 115.3 mm Depth 30 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) 0 °C ... 55 °C 05/03/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2832726 Industrial Ethernet Switch - FL SWITCH SF 7TX/FX - 2832726 Technical data Ambient conditions Ambient temperature (storage/transport) -20 °C ... 70 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 86 kPa ... 108 kPa (up to 1500 m above mean sea level) Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above mean sea level) Interfaces Interface 1 Ethernet (RJ45) No. of ports 7 (RJ45 ports) Connection method RJ45 Note on connection method Auto negotiation and autocrossing Transmission physics Ethernet in RJ45 twisted pair Transmission speed 10/100 MBit/s Transmission length 100 m (per segment) Signal LEDs Data receive, link status Interface 2 Fiber optic interface No. of ports 1 (SC multi-mode) Connection method SC Transmission physics multi-mode fiberglass Transmission speed 100 MBit/s (full duplex) Transmission length 5.7 km (fiberglass with F-G 50/125 0.7 dB/km F1200) 2.5 km (fiberglass with F-G 50/125 1.6 dB/km F800) 10 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000) 2.9 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000) Wavelength 1300 nm Interface 4 Potential-free signaling contact Connection method Plug-in/screw connection via COMBICON Function Basic functions Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port Network expansion parameters Cascading depth Network, linear, and star structure: any Maximum conductor length (twisted pair) 100 m Supply voltage Supply voltage 24 V DC (redundant) Residual ripple 3.6 VPP (within the permitted voltage range) 05/03/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2832726 Industrial Ethernet Switch - FL SWITCH SF 7TX/FX - 2832726 Technical data Supply voltage Supply voltage range 18.5 V DC ... 30.2 V DC Typical current consumption typ. 220 mA (at US = 24 V DC) 135 mA (at US = 24 V DC: >VC 9) General Mounting type DIN rail Type AX Block design Net weight 260 g Housing material Aluminum Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Developed in acc. with standard IEC 61000-6.2 Test standard IEC 61000-4-2 (ESD) Test result Criterion B Test standard IEC 61000-4-3 (immunity to radiated interference) Test result Criterion A Test standard IEC 61000-4-4 (burst) Test result Criterion A Test standard IEC 61000-4-5 (surge) Test result Criterion A Test standard IEC 61000-4-6 (immunity to conducted interference) Test result Criterion A Test standard IEC 61000-4-8 (immunity to magnetic fields) Test result Criterion A Test standard EN 55022 (emitted interference) Test result Criterion A Test section 500 V DC 1 min. Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2:2005 Vibration (storage/transport) 5g, 150 Hz, in acc. with IEC 60068-2-6 Vibration (operation) In acc. with IEC 60068-2-6: 5g, 150 Hz Classifications eCl@ss eCl@ss 4.0 27250501 eCl@ss 4.1 27250501 05/03/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2832726 Industrial Ethernet Switch - FL SWITCH SF 7TX/FX - 2832726 Classifications eCl@ss eCl@ss 5.0 27250501 eCl@ss 5.1 27250501 eCl@ss 6.0 19170106 eCl@ss 7.0 19170106 eCl@ss 8.0 19170106 ETIM ETIM 2.0 EC000734 ETIM 3.0 EC000734 ETIM 4.0 EC000734 ETIM 5.0 EC000734 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201410 UNSPSC 13.2 43201410 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / EAC / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed  05/03/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2832726 Industrial Ethernet Switch - FL SWITCH SF 7TX/FX - 2832726 Approvals cUL Listed  EAC  EAC  cULus Listed  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/03/2016   Page 5 / 5