2834627

Completely Assembled Relay Modules PR1-R... Including 1 or 2 PDT Miniature Relays – With Screw or Spring-Cage Connection PR1-R... is a 16 mm wide, completely assembled, coupling relay series for universal use with screw or spring-cage connection, which consists of a relay base, a plug-in miniature power relay, a plug-in display module or interference suppression module, and a relay retaining bracket with eject function. Whether with free-wheeling diode or varistor, an LED is provided for status display on the interference suppression module. The relay base has a 1/3 story design and thus has a logical structure. It has coil and contact connections that are located opposite one another and thus meets the requirements of modern control cabinet concepts with clear isolation of control signals and load. 71 mm 72 mm 97 mm Advantages: – Low ordering and storage costs – High degree of flexibility and low maintenance costs through the use of plug-in relays 8 mm Input Voltages PR1-R... is available on the coil side in popular industrial voltages. Another advantage is the integrated input wiring, which consists of a status LED and a free-wheeling diode (DC types) or a varistor (AC types). Rugged Miniature Relay At the hear t of the series is a rugged miniature power relay, which is one of the most modern and powerful models on the market. The types with hard gold-plated contacts are designed to provide increased contact reliability in low-current applications. 10 mm 78.5 mm M3 Solid Stranded [mm2 ] AWG Screw connection 0.14 - 2.5 0.14 - 2.5 26 - 14 Spring-cage 0.2 - 1.5 0.2 - 1.5 25 - 16 connection * The electrical data is determined by the relay. PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 - 52 35 - 30 0 • Fax +49 - 52 35 - 34 12 00 • www.phoenixcontact.com Local contact: www.phoenixcontact.com/salesnetwork PHOENIX CONTACT page 1 of 5 I [A] U [V] * * * * Completely Assembled Relay Modules With Screw Connection and Miniature Relay PR1-RSC3...21.... (1 PDT Contact) Description Input Voltage UN1) Pre-assembled coupling relay with screw connection, consisting of relay base, plug-in miniature power relay, and plug-in display/interference suppression module, for mounting on 3, includes 5 removable MP1 markers Pre-assembled coupling relay with screw connection, as above, but with solid gold coating on the contacts Type Order No. Pcs. Pkt. 24 V DC 24 V AC 120 V AC 230 V AC Includes power contact relay PR1-RSC3-LDP-24DC/21 PR1-RSC3-LV-24AC/21 PR1-RSC3-LV-120AC/21 PR1-RSC3-LV-230AC/21 2834326 2834339 2834342 2834355 5 5 5 5 24 V DC 24 V AC 120 V AC 230 V AC Includes hard gold-plated contacts PR1-RSC3-LDP-24DC/21AU PR1-RSC3-LV-24AC/21AU PR1-RSC3-LV-120AC/21AU PR1-RSC3-LV-230AC/21AU 2834368 2834371 2834384 2834397 5 5 5 5 Technical Data Input Data Nominal input voltage UN Permissible range with reference to UN Typical input current at UN (for AC: 50/60 Hz) Typical response time at UN (for AC: depending on phase relation) Typical release time at UN (for AC: depending on phase relation) Input wiring: 24 V DC 24, 120, 230 V AC Output Data Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power, ohmic load: (For additional data, see INTERFACE catalog) Minimum switching power General Data Test voltage Ambient operating temperature range Nominal operating mode Mechanical service life Standards/specifications 250 V AC Winding/contact Mounting position/mounting Connection type 1 )Additional input voltages available on request. 2 )If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the values of the AgNi contact will apply. 24 V DC 24 V AC 120 V AC 230 V AC See diagram in the INTERFACE catalog 19 mA 34/26 mA 9/7mA 6/5.5 mA 8 ms 3 - 12 ms 3 - 12 ms 3 - 12 ms 10 ms 1.5 - 14 ms 1.5 - 16 ms 2 - 22 ms Operating indicator and free-wheeling diode in the plug-in module Operating indicator and varistor in the plug-in module PR1-RSC3...21 Single contact, 1 PDT AgNi 250 V AC/DC 12 V 12 A 30 A (300 ms) 100 mA 3000 VA PR1-RSC3...21AU Single contact, 1 PDT AgNi + 5 µm Au 2) 30 V AC/36 V DC 100 mV 50 mA 50 mA 1 mA – 1.2 W 100 µW 4 kV, 50 Hz, 1 minute -25°C to +60°C 100% operating factor 3 x 107 cycles IEC 60 255/DIN VDE 0435 (in relevant parts), DIN EN 50 178/ VDE 0160 (in relevant parts), EN 60 730/DIN VDE 0631, IEC 60 664/IEC 60 664 A/DIN VDE 0110, pollution degree 3, Surge Voltage Category III Any/can be mounted without spacing Screw connection Insulating housing version Polyamide PA fiber reinforced, PA-F Color: green For torque of terminal block screws, see INTERFACE catalog. The dimensioning cross section (see INTERFACE catalog) refers to simple wires without ferrules. Inductive loads must be attenuated with an effective protective circuit to protect inputs and outputs. Connection diagram: 12 12 14 14 11 11 A1+ A2- DC coils A1 A2 AC coils PHOENIX CONTACT page 2 of 5 Completely Assembled Relay Modules With Screw Connection and Miniature Relay PR1-RSC3...2x21... (2 PDT Contacts) Description Input Voltage UN1) Pre-assembled coupling relay with screw connection, consisting of relay base, plugin miniature power relay, and plug-in display/ interference suppression module, for mounting on 3, includes 5 removable MP1 markers Pre-assembled coupling relay with screw connection, as above, but with solid gold coating on the contacts Type Order No. Pcs. Pkt. 24 V DC 24 V AC 120 V AC 230 V AC Includes power contact relay PR1-RSC3-LDP-24DC/2x21 PR1-RSC3-LV-24AC/2x21 PR1-RSC3-LV-120AC/2x21 PR1-RSC3-LV-230AC/2x21 2834481 2834494 2834504 2834517 5 5 5 5 24 V DC 24 V AC 120 V AC 230 V AC Includes hard gold-plated contacts PR1-RSC3-LDP-24DC/2x21AU PR1-RSC3-LV-24AC/2x21AU PR1-RSC3-LV-120AC/2x21AU PR1-RSC3-LV-230AC/2x21AU 2834520 2834533 2834546 2834559 5 5 5 5 Technical Data Input Data Nominal input voltage UN Permissible range with reference to UN Typical input current at UN (for AC: 50/60 Hz) Typical response time at UN (for AC: depending on phase relation) Typical release time at UN (for AC: depending on phase relation) Input wiring: 24 V DC 24, 120, 230 V AC Output Data Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power, ohmic load: (For additional data, see INTERFACE catalog) Minimum switching power General Data Test voltage 250 V AC Winding/contact Contact/contact Ambient operating temperature range Nominal operating mode Mechanical service life Standards/specifications Mounting position/mounting Connection type 1 )Additional input voltages available on request. 2 )If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the values of the AgNi contact will apply. 24 V DC 24 V AC 120 V AC 230 V AC See diagram in the INTERFACE catalog 19 mA 34/26 mA 9/7mA 6/5.5 mA 8 ms 3 - 12 ms 3 - 12 ms 3 - 12 ms 10 ms 1.5 - 14 ms 1.5 - 16 ms 2 - 22 ms Operating indicator and free-wheeling diode in the plug-in module Operating indicator and varistor in the plug-in module PR1-RSC3...2x21 Single contact, 2 PDT AgNi 250 V AC/DC 5V 8A 15 A (300 ms) 10 mA 2000 VA PR1-RSC3...2x21AU Single contact, 2 PDT AgNi + 5 µm Au 2) 30 V AC/36 V DC 100 mV 50 mA 50 mA 1 mA – 50 mW 100 µW 4 kV, 50 Hz, 1 minute 2.5 kV, 50 Hz, 1 minute -25°C to +60°C 100% operating factor 3 x 107 cycles IEC 60 255/DIN VDE 0435 (in relevant parts), DIN EN 50 178/ VDE 0160 (in relevant parts), EN 60 730/DIN VDE 0631, IEC 60 664/IEC 60 664 A/DIN VDE 0110, pollution degree 3, Surge Voltage Category III Any/can be mounted without spacing Screw connection Insulating housing version Polyamide PA fiber reinforced, PA-F Color: green For torque of terminal block screws, see INTERFACE catalog. The dimensioning cross section (see INTERFACE catalog) refers to simple wires without ferrules. Inductive loads must be attenuated with an effective protective circuit to protect inputs and outputs. Connection diagram: 22 12 22 12 24 14 24 14 21 11 21 11 A1+ A2- DC coils A1 A2 AC coils PHOENIX CONTACT page 3 of 5 Completely Assembled Relay Modules With Spring-Cage Connection and Miniature Relay PR1-RSP3...21.... (1 PDT Contact) Description Input Voltage UN1) Pre-assembled coupling relay with spring-cage connection, consisting of relay base, plug-in miniature power relay, and plug-in display or protection module, for mounting on 3, includes 5 removable MP1 markers Pre-assembled coupling relay with spring-cage connection, as above, but with solid gold coating on the contacts Type Order No. Pcs. Pkt. 24 V DC 24 V AC 120 V AC 230 V AC Includes power contact relay PR1-RSP3-LDP-24DC/21 PR1-RSP3-LV-24AC/21 PR1-RSP3-LV-120AC/21 PR1-RSP3-LV-230AC/21 2834407 2834410 2834423 2834436 5 5 5 5 24 V DC 24 V AC 120 V AC 230 V AC Includes hard gold-plated contacts PR1-RSP3-LDP-24DC/21AU PR1-RSP3-LV-24AC/21AU PR1-RSP3-LV-120AC/21AU PR1-RSP3-LV-230AC/21AU 2834449 2834452 2834465 2834478 5 5 5 5 Technical Data Input Data Nominal input voltage UN Permissible range with reference to UN Typical input current at UN (for AC: 50/60 Hz) Typical response time at UN (for AC: depending on phase relation) Typical release time at UN (for AC: depending on phase relation) Input wiring: 24 V DC 24, 120, 230 V AC Output Data Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power, ohmic load: (For additional data, see INTERFACE catalog) Minimum switching power General Data Test voltage Ambient operating temperature range Nominal operating mode Mechanical service life Standards/specifications 250 V AC Winding/contact Mounting position/mounting Connection type 1 )Additional input voltages available on request. 2 )If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the values of the AgNi contact will apply. 24 V DC 24 V AC 120 V AC 230 V AC See diagram in the INTERFACE catalog 19 mA 34/26 mA 9/7mA 6/5.5 mA 8 ms 3 - 12 ms 3 - 12 ms 3 - 12 ms 10 ms 1.5 - 14 ms 1.5 - 16 ms 2 - 22 ms Operating indicator and free-wheeling diode in the plug-in module Operating indicator and varistor in the plug-in module PR1-RSP3...21 Single contact, 1 PDT AgNi 250 V AC/DC 12 V 10 A 30 A (300 ms) 100 mA 2500 VA PR1-RSP3...21AU Single contact, 1 PDT AgNi + 5 µm Au 2) 30 V AC/36 V DC 100 mV 50 mA 50 mA 1 mA – 1.2 W 100 µW 4 kV, 50 Hz, 1 minute -25°C to +60°C 100% operating factor 3 x 107 cycles IEC 60 255/DIN VDE 0435 (in relevant parts), DIN EN 50 178/ VDE 0160 (in relevant parts), EN 60 730/DIN VDE 0631, IEC 60 664/IEC 60 664 A/DIN VDE 0110, pollution degree 3, Surge Voltage Category III Any/can be mounted without spacing Spring-cage connection Insulating housing version Polyamide PA fiber reinforced, PA-F Color: green The dimensioning cross section (see INTERFACE catalog) refers to simple wires without ferrules. Inductive loads must be attenuated with an effective protective circuit to protect inputs and outputs. Connection diagram: 12 12 14 14 11 11 A1+ A2- DC coils A1 A2 AC coils PHOENIX CONTACT page 4 of 5 Completely Assembled Relay Modules With Spring-Cage Connection and Miniature Relay PR1-RSP3...2x21... (2 PDT Contacts) Description Input Voltage UN1) Pre-assembled coupling relay with spring-cage connection, consisting of relay base, plug-in miniature power relay, and plug-in display or protection module, for mounting on 3, includes 5 removable MP1 markers Pre-assembled coupling relay with spring-cage connection, as above, but with solid gold coating on the contacts Type Order No. Pcs. Pkt. 24 V DC 24 V AC 120 V AC 230 V AC Includes power contact relay PR1-RSP3-LDP-24DC/2x21 PR1-RSP3-LV-24AC/2x21 PR1-RSP3-LV-120AC/2x21 PR1-RSP3-LV-230AC/2x21 2834562 2834575 2834588 2834591 5 5 5 5 24 V DC 24 V AC 120 V AC 230 V AC Includes hard gold-plated contacts PR1-RSP3-LDP-24DC/2x21AU PR1-RSP3-LV-24AC/2x21AU PR1-RSP3-LV-120AC/2x21AU PR1-RSP3-LV-230AC/2x21AU 2834601 2834614 2834627 2834630 5 5 5 5 Technical Data Input Data Nominal input voltage UN Permissible range with reference to UN Typical input current at UN (for AC: 50/60 Hz) Typical response time at UN (for AC: depending on phase relation) Typical release time at UN (for AC: depending on phase relation) Input wiring: 24 V DC 24, 120, 230 V AC General Data Test voltage 250 V AC Winding/contact Contact/contact Ambient operating temperature range Nominal operating mode Mechanical service life Standards/specifications Mounting position/mounting Connection type 1 )Additional input voltages available on request. 2 )If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the values of the AgNi contact will apply. PR1-RSP3...2x21 Single contact, 2 PDT AgNi 250 V AC/DC 5V 8A 15 A (300 ms) 10 mA 2000 VA PR1-RSP3...2x21AU Single contact, 2 PDT AgNi + 5 µm Au 2) 30 V AC/36 V DC 100 mV 50 mA 50 mA 1 mA – 50 mW 100 µW 4 kV, 50 Hz, 1 minute 2.5 kV, 50 Hz, 1 minute -25°C to +60°C 100% operating factor 3 x 107 cycles IEC 60 255/DIN VDE 0435 (in relevant parts), DIN EN 50 178/ VDE 0160 (in relevant parts), EN 60 730/DIN VDE 0631, IEC 60 664/IEC 60 664 A/DIN VDE 0110, pollution degree 3, Surge Voltage Category III Any/can be mounted without spacing Spring-cage connection Insulating housing version Polyamide PA fiber reinforced, PA-F Color: green The dimensioning cross section (see INTERFACE catalog) refers to simple wires without ferrules. Inductive loads must be attenuated with an effective protective circuit to protect inputs and outputs. Connection diagram: 22 12 22 12 24 14 24 14 21 11 21 11 A1+ A2- DC coils A1 A2 AC coils PHOENIX CONTACT page 5 of 5 TNR:102406-01-en/09/14/05 © PHOENIX CONTACT 2005 Output Data Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power, ohmic load: (For additional data, see INTERFACE catalog) Minimum switching power 24 V DC 24 V AC 120 V AC 230 V AC See diagram in the INTERFACE catalog 19 mA 34/26 mA 9/7mA 6/5.5 mA 8 ms 3 - 12 ms 3 - 12 ms 3 - 12 ms 10 ms 1.5 - 14 ms 1.5 - 16 ms 2 - 22 ms Operating indicator and free-wheeling diode in the plug-in module Operating indicator and varistor in the plug-in module