2835367

https://www.phoenixcontact.com/us/products/2835367 Signal isolator - PI-EX-NAM/RNC-NE - 2835367 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Ex-i binary input: NAMUR isolation amplifiers. For operating proximity sensors and switches in Ex areas. The binary signals are transmitted to a safe area. Relay output (N/C contact), line fault detection. Galvanic 3-way isolation. Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 96.7 GRM Custom tariff number 85437090 Country of origin Germany Technical data Note: Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.4 mm Height 145 mm Depth 147 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (vertical assembly) -20 °C ... 55 °C (horizontal assembly) Ambient temperature (storage/transport) -40 °C ... 80 °C Permissible humidity (operation) 5 % ... 95 % (relative humidity, no condensation) Noise immunity EN 61326:1997 Input data Control current circuit Intrinsically safe 12/4/13   Page 1 / 6 https://www.phoenixcontact.com/us/products/2835367 Signal isolator - PI-EX-NAM/RNC-NE - 2835367 Technical data Input data Available input sources NAMUR proximity sensors Floating switch contacts Switch contacts with resistance circuit Non-load voltage 8.2 V DC ±10 % Switching points (attenuated) < 1.2 mA (attenuated in acc. with EN 60947-5-6) Switching points (unattenuated) > 2.1 mA (non-attenuated in acc. with EN 60947-5-6) Line error detection Activated /deactivated via DIP switch Output data Switching output Relay output Configurable/programmable Switching behavior can be inverted via DIP switch Contact type N/C contact Contact material AgSnO, hard gold-plated Limiting continuous current 1 A (30 V DC) 0.5 A (125 V AC) Min. contact current 1 mA Mechanical service life 10 cycles Service life, electrical 2 x 10 cycles with full load 7 5 Power supply Supply voltage range 20 V DC ... 30 V DC Max. current consumption max. 40 mA Power consumption max. 0.8 W (24 V) General No. of channels 1 Test voltage input/output 1.5 kV AC Insulation voltage input/output/supply 0.25 kVrms Status display Green LED (supply voltage) Yellow LED (status display) Red LED (line errors) Inflammability class according to UL 94 V0 Electromagnetic compatibility Conformance with EMC directive 89/336/EC Emitted interference EN 61326:1997 Housing material Polyamide PA non-reinforced Color green Safety data Max. output voltage Uo 10.6 V 12/4/13   Page 2 / 6 https://www.phoenixcontact.com/us/products/2835367 Signal isolator - PI-EX-NAM/RNC-NE - 2835367 Technical data Safety data Max. output current Io 33 mA Max. output power Po 86 mW Gas group IIA Max. external inductivity Lo 230 mH Max. external capacity Co 72.9 µF Gas group IIB Max. external inductivity Lo 110 mH Max. external capacity Co 16.2 µF Gas group IIC Max. external inductivity Lo 30 mH Max. external capacity Co 2.3 µF EEX specification [EEx ia] IIC, EX II (1)GD, KEMA 00 ATEX 1126 Classifications eCl@ss eCl@ss 4.0 27210121 eCl@ss 4.1 27210121 eCl@ss 5.0 27210121 eCl@ss 5.1 27210121 eCl@ss 6.0 27210121 eCl@ss 7.0 27210121 eCl@ss 8.0 27210121 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 12/4/13   Page 3 / 6 https://www.phoenixcontact.com/us/products/2835367 Signal isolator - PI-EX-NAM/RNC-NE - 2835367 Approvals Approvals Approvals GOST Ex Approvals ATEX Approvals submitted Approval details GOST  Accessories Additional products Basic terminal block - PI-EX-TB - 2835901 Ex base terminal block for intrinsically safe signals with knife disconnection and test connections     Surge protection device - TT-PI-EX-TB - 2858386 Intrinsically safe basic terminal block with isolating connector, test connections and surge protection, for mounting on NS 35/7.5     12/4/13   Page 4 / 6 https://www.phoenixcontact.com/us/products/2835367 Signal isolator - PI-EX-NAM/RNC-NE - 2835367 Accessories Basic terminal block - PI-EX-ES-1/3 - 2835325 Ex basic terminal block, with three terminal points to the field level (Ex area)     Drawings Dimensioned drawing 12,4 147 145 12/4/13   Page 5 / 6 https://www.phoenixcontact.com/us/products/2835367 Signal isolator - PI-EX-NAM/RNC-NE - 2835367 Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/4/13   Page 6 / 6