2835613

https://www.phoenixcontact.com/us/products/2835613 Signal isolator - PI-EX-IDS-I/I - 2835613 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Ex-i output signal conditioner, HART-capable. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Galvanic 3-way isolation (input / output / supply). Line fault detection. Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 106.8 GRM Custom tariff number 85437090 Country of origin Germany Technical data Note: Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.4 mm Height 145 mm Depth 147 mm Ambient conditions Ambient temperature (operation) -20 °C ... 55 °C (see data sheet) Ambient temperature (storage/transport) -40 °C ... 80 °C Permissible humidity (operation) 5 % ... 95 % (no condensation) Degree of protection IP20 Input data Signal input Current input 12/4/13   Page 1 / 5 https://www.phoenixcontact.com/us/products/2835613 Signal isolator - PI-EX-IDS-I/I - 2835613 Technical data Input data Current input signal 4 mA ... 20 mA 0 mA ... 20 mA Input resistance current input 5.4 V (at 20 mA) Input current range 0 mA ... 22 mA Output data Signal output Intrinsically safe Current output signal 4 mA ... 20 mA 0 mA ... 20 mA Load/output load current output ≤ 800 Ω Output ripple (current) < 50 µAPP (For 800 Ω) Power supply Supply voltage range 20 V DC ... 35 V DC Max. current consumption < 15 mA (At 24 V DC / 0 mA) Power consumption max. 1.2 W (At 24 V DC / 20 mA) General No. of channels 1 Maximum transmission error ≤ 0.1 % (Of end value (at 20°C)) Maximum temperature coefficient < 0.01 %/K Step response (10-90%) < 140 µs Status display Green LED (supply voltage, PWR) Inflammability class according to UL 94 V0 Standards/regulations NAMUR recommendation NE 21 Housing material PBT and polyamide PA non-reinforced Color green Name Input/output Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Name Input/power supply Electrical isolation 1.5 kV (50 Hz, 1 min., test voltage) Name Output/supply Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Conformance CE-compliant ATEX  II (1) GD [EEx ia] IIC  II 3 G Ex nA II T4 X UL, USA / Canada UL applied for Data communication (bypass) 12/4/13   Page 2 / 5 https://www.phoenixcontact.com/us/products/2835613 Signal isolator - PI-EX-IDS-I/I - 2835613 Technical data Data communication (bypass) HART function Yes Protocols supported HART Safety data Max. inductance Li 0.1 mH Max. capacitance Ci 5 nF Max. output voltage Uo 27.7 V Max. output current Io 92 mA Max. output power Po 638 mW Gas group IIB Max. external inductivity Lo 15 mH Max. external capacity Co 658 nF Additional text The maximum values should be used either solely as concentrated capacitance values or solely as concentrated inductance values, or as cable reactance values Gas group IIB Max. external inductivity Lo 1.9 mH Max. external capacity Co 295 nF Additional text The maximum values should also be used as concentrated capacitance values and concentrated inductance values. Safety-related maximum voltage Um 250 V AC Gas group IIC Max. external inductivity Lo 1.2 mH Max. external capacity Co 80 nF Additional text The maximum values should be used either solely as concentrated capacitance values or solely as concentrated inductance values, or as cable reactance values Gas group IIC Max. external inductivity Lo 0.4 mH Max. external capacity Co 64 nF Additional text The maximum values should also be used as concentrated capacitance values and concentrated inductance values. Classifications eCl@ss eCl@ss 4.0 27210121 eCl@ss 4.1 27210121 eCl@ss 5.0 27210121 12/4/13   Page 3 / 5 https://www.phoenixcontact.com/us/products/2835613 Signal isolator - PI-EX-IDS-I/I - 2835613 Classifications eCl@ss eCl@ss 5.1 27210121 eCl@ss 6.0 27210121 eCl@ss 7.0 27210121 eCl@ss 8.0 27210121 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 ETIM 5.0 EC001596 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Accessories Additional products Basic terminal block - PI-EX-TB - 2835901 Ex base terminal block for intrinsically safe signals with knife disconnection and test connections     Surge protection device - TT-PI-EX-TB - 2858386 Intrinsically safe basic terminal block with isolating connector, test connections and surge protection, for mounting on NS 35/7.5     12/4/13   Page 4 / 5 https://www.phoenixcontact.com/us/products/2835613 Signal isolator - PI-EX-IDS-I/I - 2835613 Accessories Basic terminal block - PI-EX-ES-1/3 - 2835325 Ex basic terminal block, with three terminal points to the field level (Ex area)     Drawings Block diagram Dimensioned drawing 145 OUT 12,4 IN 0/4...20mA 4...20mA + 0/4...20mA +- UB+ UB- - +- + UB+ UB+ UB- PWR UB- 147 P - PI-EX-IDS-I/I © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/4/13   Page 5 / 5