2836337

Extract from the online catalog     IB IL CNT Order No.: 2836337 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2836337   Inline counter terminal block, without accessories, 1 counter input, 1 control input, 1 output, 24 V DC, 500 mA, 3-wire connection method   Product notes WEEE/RoHS-compliant since: 03/03/2008 Commercial data GTIN (EAN) 4 017918 160838 sales group K413 Pack 1 pcs. Customs tariff 85389091 Catalog page information Page 90 (AX-2007) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description The Inline IB IL CNT counter terminal registers and processes quick pulse trains from sensors. It has a counter input, a control input, and a switching output that can be parameterized by the module itself. This way, quick response times can be achieved independent of the bus and the control system. The module can be operated in different operating modes: - Event counting - Time measurement and - Pulse generation PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 6 Feb 8, 2011 IB IL CNT Order No.: 2836337 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2836337 The inputs can be used to connect initiators with 24 V DC supply and 5 V DC supply. The switching output supplies a maximum current of 500 mA. The Inline counter terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the ZB-FM-6... Zack strip for labeling the terminal points. Technical data Interfaces Interface Inline local bus Type of connection Inline data jumper Transmission speed 500 kBit/s Transmission physics Copper Power supply Max. current consumption 50 mA Typical current consumption 40 mA I/O voltage 24 V DC (via voltage jumper) Ripple 5% Peripherals voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Initiator power supply Segment circuit (500 mA) Comments The following are connected to the segment circuit US: Switching output, sensor supplies with their own short-circuit protection Electrical isolation Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Counter input Number of inputs 2 Operating mode Event counting, frequency/time measurement, pulse generator Input frequency 100 kHz Input voltage 24 V DC 5 V DC Input current PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de 5 mA (typical) Page 2 / 6 Feb 8, 2011 IB IL CNT Order No.: 2836337 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2836337 Control input Number of inputs 2 Connection method 2, 3-conductor Input voltage 24 V DC 5 V DC Input current 5 mA (typical) Outputs Number of outputs 1 Connection method 2-wire (shielded) Output voltage 24 V DC Output current 500 mA General data Weight 94 g Number of connectors 2 Degree of protection IP20 Protection class III, IEC 61140, EN 61140, VDE 0140-1 Connection data Inline connectors Spring-cage connection 0.08 mm² 1.5 mm² 0.08 mm² 1.5 mm² 28 16 Width 24.4 mm Height 119.8 mm Depth 71.5 mm Inline potential routing Communications power UL 7.5 V DC (via voltage jumper) Current consumption from UL max. 50 mA max. 50 mA Segment supply voltage US 24 V DC Current consumption from US max. 1 A Certificates / Approvals Certification ABS, CUL, DNV, GL, GOST, UL Certifications applied for: LR / BV PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 6 Feb 8, 2011 IB IL CNT Order No.: 2836337 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2836337 Accessories Item Designation Description 0809492 ESL 62X10 Insert strip for laser printer, lettering field: 62 x 10 mm 2727501 IB IL FIELD 2 Labeling field, width: 12.2 mm 2732664 IB IL AO/CNT-PLSET Connector set 2726353 IB IL SCN-6 SHIELD Inline shield connector 2726337 IB IL SCN-8 Connector, for digital 1, 2 or 8-channel Inline terminals Marking Plug/Adapter Diagrams/Drawings Connection diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 6 Feb 8, 2011 IB IL CNT Order No.: 2836337 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2836337 Block diagram Dimensioned drawing FAQs • Apparent measurement error in the operating mode "Time-controlled frequency measurement" Due to predefined structures in the microcontroller used, the conversion time for the operating mode "Timecontrolled frequency measurement" can only be set in steps. It is therefore not possible to set the conversion times to exactly the nominal values, such as 1 s or 10 ms. The actual conversion times are approx. 0.16% shorter than the nominal values. There is therefore an apparent measurement error of -0.16% in this operating mode. • How high is the rated current consumption from the various voltage areas? For 7.5 V supply of the bus logic (UL), the nominal current consumption of the module is typ. 40 mA and max. 50 mA. The 24 V supply of the switching output and the sensor supply is provided via the segment circuit (US). The nominal current consumption here is 1 A. There is thus a maximum current consumption of a total of 1.05 A from the voltage areas of UL and US. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 6 Feb 8, 2011 IB IL CNT Order No.: 2836337 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2836337 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2011 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 6 / 6 Feb 8, 2011