2838209

https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge arrester consisting of base element and ground connectors, for mounting on NS 35/7.5, nominal voltage: 230 V AC, 3 + 1 circuit Product Features ■ ■ ■ ■ ■ ■ With or without floating remote indication contact Mechanical coding of all slots Optical, mechanical status indication for the individual arresters Disconnect device on each individual plug Multi-channel type 2 arresters Type 2 consistent plug-in surge arresters Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 400.0 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 90 mm Width 71 mm Depth 58 mm Horizontal pitch 4 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) 03/13/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 25g (half sinus / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General Standards/specifications IEC 61643-11 2011 EN 61643-11 2012 IEC test classification II T2 EN type T2 IEC power supply system TN-S TT Number of ports One SPD design Combination type Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color jet black RAL 9005 Housing material PA 6.6 PBT Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 4 Surge protection fault message optical Protective circuit Nominal voltage UN 240/415 V AC (TN-S) 240/415 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-N) 275 V AC Maximum continuous operating voltage UC (L-PE) 275 V AC Maximum continuous voltage UC (N-PE) 260 V AC Rated load current IL 80 A 03/13/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Technical data Protective circuit Residual current IPE ≤ 5 µA Standby power consumption PC ≤ 360 mVA Nominal discharge current In (8/20) µs 20 kA Maximum discharge current Imax (8/20) µs 40 kA Follow current interrupt rating Ifi (N-PE) 100 A (260 V) Short-circuit current rating ISCCR 25 kA Voltage protection level Up (L-N) ≤ 1.35 kV Voltage protection level Up (L-PE) ≤ 1.6 kV Voltage protection level Up (N-PE) ≤ 1.5 kV Residual voltage Ures (L-N) ≤ 1.35 kV (at In) ≤ 1.1 kV (at 10 kA) ≤ 1 kV (at 5 kA) ≤ 0.9 kV (at 3 kA) Residual voltage Ures (L-PE) ≤ 1.6 kV (at In) ≤ 1.2 kV (at 10 kA) ≤ 1 kV (at 5 kA) ≤ 0.9 kV (at 3 kA) Residual voltage Ures (N-PE) ≤ 0.4 kV (at In) ≤ 0.25 kV (at 10 kA) ≤ 0.15 kV (at 5 kA) ≤ 0.1 kV (at 3 kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs (N-PE) ≤ 1.5 kV TOV behavior at UT (L-N) 335 V AC (5 s / withstand mode) 440 V AC (120 min / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode) Response time tA (L-N) ≤ 25 ns Response time tA (N-PE) ≤ 100 ns Max. backup fuse with branch wiring 125 A (gG) Max. backup fuse with V-type through wiring 80 A (gG) Connection data Connection method Screw connection Conductor cross section flexible 1.5 mm² ... 25 mm² Conductor cross section solid 1.5 mm² ... 35 mm² Conductor cross section AWG 15 ... 2 Screw thread M5 Tightening torque 4.5 Nm 03/13/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Technical data Connection data Stripping length 16 mm UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-L) 550 V AC Maximum continuous operating voltage MCOV (L-N) 275 V AC Maximum continuous operating voltage MCOV (L-G) 275 V AC Maximum continuous operating voltage MCOV (N-G) 260 V AC Nom. voltage 230/400 V AC Mode of protection L-L L-N L-G N-G Power distribution system 3Y Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-L) 2720 V Measured limiting voltage MLV (L-N) 1910 V Measured limiting voltage MLV (L-G) 2630 V Measured limiting voltage MLV (N-G) 1370 V Nominal discharge current In (L-L) 20 kA Nominal discharge current In (L-N) 20 kA Nominal discharge current In (L-G) 20 kA Nominal discharge current In (N-G) 20 kA UL connection data Conductor cross section AWG 10 ... 2 Tightening torque 30 lbf-in. Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130805 eCl@ss 7.0 27130805 eCl@ss 8.0 27130805 03/13/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Classifications eCl@ss eCl@ss 9.0 27130805 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals IECEE CB Scheme / UL Recognized / KEMA-KEUR / ÖVE / cUL Recognized / GL / CCA / EAC / EAC / CSA / cULus Recognized Ex Approvals Approvals submitted Approval details IECEE CB Scheme  UL Recognized  03/13/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Approvals KEMA-KEUR  ÖVE  cUL Recognized  GL  CCA  EAC  EAC  CSA  cULus Recognized  Drawings 03/13/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2838209 Type 2 surge arrester - VAL-MS 230/3+1 - 2838209 Dimensional drawing Circuit diagram 99 58 22,5 51,5 65,5 45 L1 L2 L3 N The illustration shows the dimensional drawing for a version with remote indicator contact Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/13/2016   Page 7 / 7