2838241

https://www.phoenixcontact.com/us/products/2838241 Surge protection plug - PT 2X2- 5DC-ST - 2838241 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PT protective connector with protective circuit for two 2-wire floating signal circuits. 5 V DC nominal voltage. HART-compatible. Product Features  Plugs can be checked with CHECKMASTER  Installed in conjunction with the PT 2x2...-BE base element  Maximum ease of maintenance thanks to the two-piece design  Base element remains an integral part of the installation  Consistent plug-in signal circuit protection  Protection for two separate floating signal circuits  Impedance-neutral disconnection of plug for test and maintenance purposes         Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 24.62 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 45 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm 02/09/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2838241 Surge protection plug - PT 2X2- 5DC-ST - 2838241 Technical data Dimensions Complete module width 17.7 mm Complete module depth 65.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP20 General Housing material PA 6.6 Flammability rating according to UL 94 V0 Color black Standards for cearances and creepage distances VDE 0110-1 IEC 60664-1 Mounting type On base element Type DIN rail module, two-section, divisible Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/ShieldEarth Ground Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.00 Protective circuit IEC test classification C1 C2 C3 D1 VDE requirement class C1 C2 C3 D1 Nominal voltage UN 5 V DC Maximum continuous voltage UC 6 V DC 4 V AC Maximum continuous voltage UC (wire-ground) 6 V DC 4 V AC Nominal current IN 450 mA (45°C) Operating effective current IC at UC ≤ 1 mA Residual current IPE ≤ 1 µA (BE: 2x2+F) ≤ 4 µA Nominal discharge current In (8/20) µs (Core-Core) 10 kA Nominal discharge current In (8/20) µs (Core-Earth) 10 kA 02/09/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2838241 Surge protection plug - PT 2X2- 5DC-ST - 2838241 Technical data Protective circuit Total surge current (8/20) µs 20 kA Max. discharge current Imax (8/20) µs maximum (Core-Core) 10 kA Max. discharge current Imax (8/20) µs maximum (Core-Earth) 10 kA Impulse discharge current (10/350)˽µs, peak value limp 2.5 kA (per path) Output voltage limitation at 1 kV/µs (Core-Core) spike ≤ 12 V Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 450 V Output voltage limitation at 1 kV/µs (Core-Core) static ≤ 10 V Residual voltage at In (conductor-conductor) ≤ 10 V Residual voltage at In (conductor-GND) ≤ 450 V Residual voltage with Ian (10/1000)µs (conductor-conductor) ≤ 12 V Response time tA (Core-Core) ≤ 1 ns Response time tA (Core-Earth) ≤ 100 ns Input attenuation aE, sym. 0.5 dB (≤ 200 kHz) Cut-off frequency fg (3 dB), sym. in 50 Ohm system typ. 1 MHz Capacity (Core-Core) 6 nF Resistance in series 2.2 Ω (Path 1-2/5-6) 2.2 Ω (Path 7-8, 11-12) Surge protection fault message None Impulse durability (conductor-conductor) C2 - 10 kV/5 kA Impulse durability (conductor-ground) C2 - 10 kV/5 kA D1 - 2,5 kA Connection data Connection method Screw connection (in connection with the base element) Connection type IN PLUGTRAB plug-in system Connection type OUT PLUGTRAB plug-in system Screw thread M3 Tightening torque 0.8 Nm Stripping length 8 mm Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Standards and Regulations Standards/regulations IEC 61643-21 02/09/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2838241 Surge protection plug - PT 2X2- 5DC-ST - 2838241 Technical data Standards and Regulations DIN EN 61643-21 UL 497B Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130807 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 ETIM ETIM 2.0 EC000943 ETIM 3.0 EC000943 ETIM 4.0 EC000943 ETIM 5.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / EAC / EAC Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed 02/09/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2838241 Surge protection plug - PT 2X2- 5DC-ST - 2838241 Approvals Approvals submitted Approval details UL Listed      Nominal current IN 0.45 A Nominal voltage UN 5V EAC  EAC  Drawings Dimensional drawing Circuit diagram 90 1 2 5 6 44,8 3 IN 51,5 65,5 9 * 4 OUT 10 7 8 11 12 The figure shows the complete module consisting of a base element and connector Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 02/09/2016   Page 5 / 5