2839130

https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge voltage arrester consisting of base element with remote indicator contact and ground connector with highcapacity varistor, for mounting on NS 35/7.5, nominal voltage: 230 V AC, 1-channel Your advantages  Single-channel, DIN-rail mountable protective devices  Base element with/without floating remote indication contact  Mechanical coding of all slots  Optical, mechanical status indication for the individual arresters  Consists of base element and plug  Disconnect device on each individual plug Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918182595 Weight per Piece (excluding packing) 136.020 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 96.8 mm Width 17.6 mm Depth 65.7 mm (incl. DIN rail 7.5 mm) 09/06/2019   Page 1 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Technical data Dimensions Horizontal pitch 1 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General IEC test classification II T2 EN type T2 IEC power supply system TN TT Mode of protection L-N L-PEN Mounting type DIN rail: 35 mm Color jet black RAL 9005 Housing material PA 6.6 PBT Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 1 Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 240/415 V AC (TN) 240/415 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous voltage UC 275 V AC Rated load current IL 80 A Residual current IPE ≤ 0.45 mA Standby power consumption PC ≤ 120 mVA Nominal discharge current In (8/20) µs 20 kA 09/06/2019   Page 2 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Technical data Protective circuit Maximum discharge current Imax (8/20) µs 40 kA Short-circuit current rating ISCCR 25 kA Voltage protection level Up ≤ 1.35 kV Residual voltage Ures ≤ 1.35 kV (at In) ≤ 1.1 kV (at 10 kA) ≤ 1 kV (at 5 kA) ≤ 0.9 kV (at 3 kA) TOV behavior at UT 335 V AC (5 s / withstand mode) 440 V AC (120 min / safe failure mode) Response time tA ≤ 25 ns Max. backup fuse with V-type through wiring 80 A (gG) Max. backup fuse with branch wiring 125 A (gG) Indicator/remote signaling Switching function PDT contact Operating voltage 5 V AC ... 250 V AC 30 V DC Operating current 5 mA AC ... 1 A AC 1 A DC Connection method Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 28 ... 16 Connection data Connection method Screw connection Screw thread M5 Tightening torque 3 Nm (1,5 mm² ... 16 mm²) 4.5 Nm (25 mm² ... 35 mm²) Stripping length 16 mm Conductor cross section flexible 1.5 mm² ... 25 mm² Conductor cross section solid 1.5 mm² ... 35 mm² Conductor cross section AWG 15 ... 2 Connection method Fork-type cable lug Conductor cross section flexible 1.5 mm² ... 16 mm² 09/06/2019   Page 3 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Technical data UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-N) 275 V AC Nom. voltage 230 V AC Mode of protection L-N Power distribution system Single phase Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-N) 1900 V Nominal discharge current In (L-N) 20 kA UL indicator/remote signaling Operating voltage 125 V AC Operating current 1 A AC Tightening torque 4 lbf-in. UL connection data Conductor cross section AWG 10 ... 2 Tightening torque 30 lbf-in. Standards and Regulations Standards/regulations IEC 61643-11 2011 EN 61643-11 2012 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/06/2019   Page 4 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Circuit diagram 09/06/2019   Page 5 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130805 eCl@ss 8.0 27130805 eCl@ss 9.0 27130805 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 ETIM 6.0 EC000941 ETIM 7.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 09/06/2019   Page 6 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Classifications UNSPSC UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals CSA / GL / CCA / UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / ÖVE / EAC / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/  13631 GL    https://approvalfinder.dnvgl.com/  94385-10 HH    NTR-AT 1947-A CCA  UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 330181 KEMA-KEUR    http://www.dekra-certification.com  2170208.01 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 330181 09/06/2019   Page 7 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Approvals IECEE CB Scheme    http://www.iecee.org/  AT 2905/M1 ÖVE    https://www.ove.at/zertifizierung-pz/zertifizierungsregister/  18583-001-14 EAC      EAC-Zulassung EAC      RU CDE.A*30.B01561 cULus Recognized       Accessories Accessories Bridge Wiring bridge - MPB 18/1- 2 - 2809209 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.     Wiring bridge - MPB 18/1- 3 - 2809212 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.     09/06/2019   Page 8 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Accessories Wiring bridge - MPB 18/1- 4 - 2809225 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.     Wiring bridge - MPB 18/1- 6 - 2748564 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.     Wiring bridge - MPB 18/1- 7 BU - 2856278 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 7-pos., color: Blue     Wiring bridge - MPB 18/1- 8 BU - 2858470 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos., color: Blue     Wiring bridge - MPB 18/1- 8 - 2748577 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.     09/06/2019   Page 9 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Accessories Wiring bridge - MPB 18/1- 9 - 2748580 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.     Wiring bridge - MPB 18/1-12 - 2748593 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.     Wiring bridge - MPB 18/1-57 - 2809238 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.     Wiring bridge - MPB 18/3- 6 - 2809241 Wiring bridge for modules with connecting pitch 17.5 mm, 3-phase, 6-pos.     Wiring bridge - MPB 18/4- 8 - 2809283 Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 8-pos.     09/06/2019   Page 10 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Accessories Wiring bridge - MPB 18/1-10/1.0.0 - 2830443 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 10 pitches with contact sequence 1-0-0     Wiring bridge - MPB 18/4- 8 - 2809283 Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 8-pos.     Wiring bridge - MPB 18/3- 6 - 2809241 Wiring bridge for modules with connecting pitch 17.5 mm, 3-phase, 6-pos.     Wiring bridge - MPB 18/1-57 - 2809238 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.     Wiring bridge - MPB 18/1-12 - 2748593 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.     09/06/2019   Page 11 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Accessories Wiring bridge - MPB 18/1- 9 - 2748580 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.     Wiring bridge - MPB 18/1- 8 - 2748577 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.     Wiring bridge - MPB 18/1- 6 - 2748564 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.     Wiring bridge - MPB 18/1- 4 - 2809225 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.     Wiring bridge - MPB 18/1- 3 - 2809212 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.     09/06/2019   Page 12 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Accessories Wiring bridge - MPB 18/1- 2 - 2809209 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.     Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     Feed-through terminal block Feed-through terminal block - DK-BIC-35 - 2749880 Feed-through terminal block for VAL and FLT applications     Labeled device marker Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589 Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     09/06/2019   Page 13 / 14 https://www.phoenixcontact.com/us/products/2839130 Type 2 surge arrester - VAL-MS 230/FM - 2839130 Accessories Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Spare parts Type 2 surge protection plug - VAL-MS 230 ST - 2798844 Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 230 V AC     Type 2 surge protection base element - VAL-MS BE/FM - 2817738 Base element for type 2 arresters of the VALVETRAB MS series of products, with remote indication contact. Design: 1channel     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/06/2019   Page 14 / 14