https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Protective plug PT with protective circuit for higher signal voltages, 2-channel, visual error warning. Nominal
voltage: 120 V AC
Your advantages
Plugs can be checked with CHECKMASTER
Maximum ease of maintenance thanks to the two-piece design
Base element remains an integral part of the installation
Protective devices for use in telecommunications and signaling networks according to IEC 61643-21
Consistent plug-in signal circuit protection
Impedance-neutral disconnection of plug for test and maintenance purposes
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918182847
Weight per Piece (excluding packing)
25.740 g
Custom tariff number
85363010
Country of origin
Germany
Technical data
Dimensions
Height
44.8 mm
Width
17.5 mm
Depth
51.7 mm
09/09/2019 Page 1 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Technical data
Dimensions
Horizontal pitch
1 Div.
Complete module height
90 mm
Complete module width
17.7 mm
Complete module depth
65.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m (amsl (above mean sea level))
Degree of protection
IP20
General
Housing material
PA 6.6
Flammability rating according to UL 94
V-0
Color
jet black RAL 9005
Mounting type
on base element
Type
Male
Direction of action
Line-Line & Line-Earth Ground
Arrester can be tested with CHECKMASTER from software version:
From SW rev. 1.00
Additional descriptions
Note
Technical data is valid in association with the following specified base
elements:
PT -BE/ FM 2839282
Protective circuit
IEC test classification
C1
C2
C3
D1
Nominal voltage UN
120 V AC (50/60 Hz)
Maximum continuous voltage UC
150 V DC
150 V AC (50/60 Hz)
Rated current
26 A AC (30 °C)
1 A DC (82 °C)
Operating effective current IC at UC
≤ 1.5 mA AC
≤ 2 mA DC
Residual current IPE
≤ 3 mA AC
≤ 4 mA DC
Nominal discharge current In (8/20) µs (line-earth)
2.5 kA
09/09/2019 Page 2 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Technical data
Protective circuit
Pulse discharge current Iimp (10/350) µs
500 A
Total discharge current Itotal (8/20) µs
5 kA
Output voltage limitation at 1 kV/µs (line-earth) spike
≤ 380 V
Output voltage limitation at 1 kV/µs (line-earth) static
≤ 380 V
Voltage protection level Up (line-earth)
≤ 450 V (C1 - 1.4 kV / 0.7 kA)
≤ 550 V (C2 - 5 kV/2,5 kA)
≤ 400 V (C3 - 100 A)
Response time tA (line-earth)
≤ 25 ns
Input attenuation aE, asym.
typ. 0.3 dB (≤ 300 kHz / 150 Ω)
Cut-off frequency fg (3 dB), asym. (GND) in 150 Ohm system
typ. 1 MHz
Capacity (line-earth)
typ. 2.5 nF
Surge protection fault message
none
Max. required back-up fuse
25 A AC (gL/gG)
1 A DC (T)
Impulse durability (line-earth)
C1 - 1,4 kV / 0,7 kA
C2 - 5 kV / 2.5 kA
C3 - 100 A
D1 - 500 A
Connection data
Connection method
Screw connection (in connection with the base element)
Screw thread
M3
Tightening torque
0.5 Nm
Stripping length
8 mm
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section solid
0.2 mm² ... 4 mm²
Conductor cross section AWG
24 ... 12
Standards and Regulations
Standards/specifications
IEC 61643 2000 + corrigendum 2001 + A1:2008, modified + A2:2012
EN 61643-21 2001 + A1:2009 + A2:2013
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
09/09/2019 Page 3 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Diagram
Dimensional drawing
09/09/2019 Page 4 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Dimensional drawing
The figure shows the complete module consisting of a base element and connector
Pictogram
09/09/2019 Page 5 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27130800
eCl@ss 4.1
27130800
eCl@ss 5.0
27130800
eCl@ss 5.1
27130800
eCl@ss 6.0
27130800
eCl@ss 7.0
27130807
eCl@ss 8.0
27130807
eCl@ss 9.0
27130807
ETIM
ETIM 2.0
EC000943
ETIM 3.0
EC000943
ETIM 4.0
EC000943
ETIM 5.0
EC000943
ETIM 6.0
EC000943
ETIM 7.0
EC000943
UNSPSC
UNSPSC 6.01
30212010
UNSPSC 7.0901
39121610
09/09/2019 Page 6 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Classifications
UNSPSC
UNSPSC 11
39121610
UNSPSC 12.01
39121610
UNSPSC 13.2
39121620
Approvals
Approvals
Approvals
UL Listed / EAC / EAC
Ex Approvals
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 138168
EAC
EAC-Zulassung
EAC
RU CDE.A*30.B01561
Accessories
Accessories
Device marking
Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
09/09/2019 Page 7 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Accessories
Labeled terminal marker
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number
of individual labels: 10
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Marker pen
09/09/2019 Page 8 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Accessories
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Terminal marking
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm, Number of individual
labels: 10
Zack Marker strip, flat - ZBF 5/WH-100:UNBEDRUCKT - 0808668
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual
labels: 10
Necessary add-on products
Type 3 surge protection base element - PT-BE/FM - 2839282
Base element for protective plug PT, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
Additional products
09/09/2019 Page 9 / 10
https://www.phoenixcontact.com/us/products/2839185
Surge protection plug - PT 2X1VA-120AC-ST - 2839185
Accessories
Shield connection - SSA 3-6 - 2839295
Shield fast connection for 3 ... 6 mm cable diameter. Potential connecting cable: 200 mm, 1 mm², color: black
Shield connection - SSA 5-10 - 2839512
Shield fast connection for 5 ... 10 mm cable diameter. Potential connecting cable: 200 mm, 1 mm², color: black
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/09/2019 Page 10 / 10
