2839486

https://www.phoenixcontact.com/us/products/2839486 Surge protection base element - PT 4-EX(I)-BE - 2839486 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Base element for protective plug PT with protective circuit for a 4-core floating EEx ia signal circuit. Nominal voltage: 24 V DC, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm Product Features  Plugs can be checked with CHECKMASTER  Maximum ease of maintenance thanks to the two-piece design  Base element remains an integral part of the installation  Tailored to the special requirements of intrinsically safe circuits  Consistent plug-in signal circuit protection  Impedance-neutral disconnection of plug for test and maintenance purposes   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 55.25 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 89.8 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm Complete module width 17.7 mm Complete module depth 65.5 mm Ambient conditions 02/01/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/2839486 Surge protection base element - PT 4-EX(I)-BE - 2839486 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP20 General Flammability rating according to UL 94 V0 Color blue Standards for cearances and creepage distances VDE 0110-1 IEC 60664-1 EN 60079-11 Mounting type DIN rail: 35 mm Type DIN rail module, two-section, divisible Number of positions 4 Protective circuit Surge protection fault message None Connection data Connection method Screw connection Connection type IN Screw terminal blocks Connection type OUT Screw terminal blocks Screw thread M3 Tightening torque 0.8 Nm Stripping length 8 mm Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Standards and Regulations Standards/regulations EN 61643-21 EN 60079-0 EN 60079-11 EN 60079-26 EN 61241-0 EN 61241-11 Conformity / approvals ATEX  II 1 G Ex ia IIC T4...T6 02/01/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/2839486 Surge protection base element - PT 4-EX(I)-BE - 2839486 Technical data Conformity / approvals  II 1 D Ex iaD 20 IP6x T85 °C...135 °C Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130803 eCl@ss 7.0 27130803 eCl@ss 8.0 27130803 ETIM ETIM 2.0 EC000472 ETIM 3.0 EC000472 ETIM 4.0 EC000472 ETIM 5.0 EC000472 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals GL / EAC / EAC Ex Approvals INMETRO / ATEX / IECEx 02/01/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/2839486 Surge protection base element - PT 4-EX(I)-BE - 2839486 Approvals Approvals submitted Approval details GL  EAC  EAC  Drawings Dimensional drawing 90 51,5 65,5 44,8 The figure shows the complete module consisting of a base element and connector Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 02/01/2016   Page 4 / 4