2839570

https://www.phoenixcontact.com/us/products/2839570 Surge protection plug - PT 2X2-HF-12 DC-ST - 2839570 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection plug for the base element, normal mode voltage coarse and fine protection for two floating double wires in IT. Design: 12 V DC Product Features ■ ■ ■ ■ ■ ■ Plugs can be checked with CHECKMASTER Maximum ease of maintenance thanks to the two-piece design Base element remains an integral part of the installation Consistent plug-in signal circuit protection Protection for fieldbus systems, PROFIBUS, and signal circuits with 3 to 5-wire technology Impedance-neutral disconnection of plug for test and maintenance purposes Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 25.87 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 45 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C 03/13/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2839570 Surge protection plug - PT 2X2-HF-12 DC-ST - 2839570 Technical data Ambient conditions Degree of protection IP20 General Housing material PA Flammability rating according to UL 94 V0 Color black Standards for cearances and creepage distances DIN VDE 0110-1 IEC 60664-1 Mounting type On base element Type DIN rail module, two-section, divisible Number of positions 5 Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/ShieldEarth Ground Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.00 Protective circuit IEC test classification C1 C2 C3 D1 VDE requirement class C1 C2 C3 D1 Nominal voltage UN 12 V DC Maximum continuous voltage UC 13 V DC 9 V AC Maximum continuous voltage UC (wire-wire) 13 V DC 9 V AC Maximum continuous voltage UC (wire-ground) 13 V DC (with PT 2x2-BE) Nominal current IN 450 mA (45°C) Operating effective current IC at UC ≤ 5 µA Residual current IPE ≤ 4 µA (with PT 2x2-BE) ≤ 1 µA (with PT 2x2+F-BE) Nominal discharge current In (8/20) µs (Core-Core) 10 kA Nominal discharge current In (8/20) µs (Core-Earth) 10 kA Total surge current (8/20) µs 20 kA Max. discharge current Imax (8/20) µs maximum (Core-Core) 10 kA 03/13/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2839570 Surge protection plug - PT 2X2-HF-12 DC-ST - 2839570 Technical data Protective circuit Max. discharge current Imax (8/20) µs maximum (Core-Earth) 10 kA Nominal pulse current Ian (10/1000) µs (Core-Core) 67 A Impulse discharge current (10/350)˽µs, peak value limp 2.5 kA Output voltage limitation at 1 kV/µs (Core-Core) spike ≤ 50 V Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 450 V ≤ 1 kV (with PT 2x2+F-BE) Output voltage limitation at 1 kV/µs (Core-Core) static ≤ 25 V Output voltage limitation at 1 kV/µs (Core-GND) static ≤ 450 V Residual voltage at In (conductor-conductor) ≤ 25 V Residual voltage with Ian (10/1000)µs (conductor-conductor) ≤ 23 V Voltage protection level Up (core-core) ≤ 100 V (C2 - 10 kV/5 kA) Voltage protection level Up (core-ground) ≤ 450 V (C2 - 10 kV/5 kA) Response time tA (Core-Core) ≤ 500 ns Response time tA (Core-Earth) ≤ 500 ns Input attenuation aE, sym. 0.2 dB (≤ 5 MHz) Cut-off frequency fg (3 dB), sym. in 100 Ohm system typ. 70 MHz Capacity (Core-Core) typ. 30 pF Resistance in series 2.2 Ω Max. required back-up fuse 500 mA (e.g. T in acc. with IEC 127-2/III) Impulse durability (conductor-conductor) C2 - 10 kV/5 kA Impulse durability (conductor-ground) C2 - 10 kV/5 kA D1 - 2,5 kA Connection data Connection method Screw connection (in connection with the base element) Connection type IN PLUGTRAB plug-in system Connection type OUT PLUGTRAB plug-in system Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Standards and Regulations Standards/regulations IEC 61643-21 03/13/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2839570 Surge protection plug - PT 2X2-HF-12 DC-ST - 2839570 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130807 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 eCl@ss 9.0 27130807 ETIM ETIM 2.0 EC000943 ETIM 3.0 EC000943 ETIM 4.0 EC000943 ETIM 5.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / GL / EAC / EAC Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details 03/13/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2839570 Surge protection plug - PT 2X2-HF-12 DC-ST - 2839570 Approvals UL Listed      Nominal current IN 0.45 A Nominal voltage UN 24 V GL  EAC  EAC  Drawings Dimensional drawing Circuit diagram 90 1 2 5 6 7 8 11 12 44,8 OUT IN 9 10 51,5 65,5 * 3 4 The figure shows the complete module consisting of a base element and connector 03/13/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2839570 Surge protection plug - PT 2X2-HF-12 DC-ST - 2839570 Diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/13/2016   Page 6 / 6