2856032

https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible. Your advantages  Plugs can be checked with CHECKMASTER  Installed in conjunction with the PT 1x2...-BE base element  Maximum ease of maintenance thanks to the two-piece design  Base element remains an integral part of the installation  Consistent plug-in signal circuit protection  Protection for a floating signal circuit  Impedance-neutral disconnection of plug for test and maintenance purposes Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918599201 Weight per Piece (excluding packing) 19.780 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 45 mm Width 17.7 mm 08/29/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Technical data Dimensions Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm Complete module width 17.7 mm Complete module depth 65.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Degree of protection IP20 General Housing material PA 6.6 Flammability rating according to UL 94 V-0 Color jet black RAL 9005 Overvoltage category 2 Degree of pollution III Mounting type on base element Type Male Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/ShieldEarth Ground Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.00 Additional descriptions Note Technical data is valid in association with the following specified base elements: PT 1X2+F-BE 2856126 PT 1X2-BE 2856113 Protective circuit IEC test classification C1 C2 C3 D1 Nominal voltage UN 24 V DC Maximum continuous voltage UC 28 V DC 20 V AC Rated current 450 mA (45 °C) Operating effective current IC at UC ≤ 5 µA 08/29/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Technical data Protective circuit Residual current IPE ≤ 1 µA (with PT 1X2+F-BE) ≤ 2 µA (with PT 1X2-BE) Nominal discharge current In (8/20) µs (line-line) 10 kA Nominal discharge current In (8/20) µs (line-earth) 10 kA Pulse discharge current Iimp (10/350) µs 2.5 kA Total discharge current Itotal (8/20) µs 20 kA Max. discharge current Imax (8/20) µs maximum (line-line) 10 kA Max. discharge current Imax (8/20) µs maximum (line-earth) 10 kA Nominal pulse current Ian (10/1000) µs (line-line) 30 A Output voltage limitation at 1 kV/µs (line-line) spike ≤ 45 V Output voltage limitation at 1 kV/µs (line-earth) spike ≤ 450 V (with PT 1X2-BE) ≤ 1 kV (with PT 1X2+F-BE) Output voltage limitation at 1 kV/µs (line-line) static ≤ 40 V Output voltage limitation at 1 kV/µs (line-earth) static ≤ 25 V (with PT 1X2-BE) ≤ 50 V (with PT 1X2+F-BE) Residual voltage at In (line-line) ≤ 40 V Residual voltage with Ian (10/1000) µs (line-line) ≤ 50 V Voltage protection level Up (line-line) ≤ 70 V (C1 - 1 kV/500 A) ≤ 70 V (C2 - 10 kV / 5 kA) ≤ 60 V (C2 - 6 kV / 3 kA) ≤ 50 V (C3 - 25 A) Voltage protection level Up (line-earth) ≤ 450 V (C1 - 1 kV / 500 A with PT 1X2-BE) ≤ 550 V (C2 - 10 kV / 5 kA with PT 1X2-BE) ≤ 1000 V (C2 - 10 kV / 5 kA with PT 1X2+F-BE) ≤ 500 V (C2 - 6 kV / 3 kA with PT 1X2-BE) Voltage protection level Up static (line-line) ≤ 40 V (C2 - 10 kV / 5 kA) Voltage protection level Up static (line-earth) ≤ 50 V (C2 - 10 kV / 5 kA with PT 1X2-BE) ≤ 100 V (C2 - 10 kV / 5 kA with PT 1X2+F-BE) Response time tA (line-line) ≤ 1 ns Response time tA (line-earth) ≤ 100 ns Input attenuation aE, sym. typ. 0.5 dB (≤ 1 MHz / 50 Ω) typ. 0.2 dB (≤ 400 kHz / 150 Ω) typ. 0.1 dB (≤ 70 kHz / 600 Ω) Cut-off frequency fg (3 dB), sym. in 50 Ohm system typ. 4.5 MHz Cut-off frequency fg (3 dB), sym. in 150 Ohm system typ. 1.5 MHz Cut-off frequency fg (3 dB), sym. in 600 Ohm system typ. 600 kHz 08/29/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Technical data Protective circuit Capacity (line-line) typ. 1.4 nF Capacity (line-earth) typ. 4 pF (with PT 1X2-BE) typ. 2 pF (with PT 1X2+F-BE) Resistance in series 2.2 Ω ±10 % Surge protection fault message none Max. required back-up fuse 500 mA (T) Impulse durability (line-line) C1 - 1 kV / 500 A C2 - 6 kV / 3 kA C2 - 10 kV / 5 kA C3 - 25 A Impulse durability (line-earth) C1 - 1 kV / 500 A C2 - 6 kV/3 kA C2 - 10 kV / 5 kA D1 - 2.5 kA Connection data Connection method Screw connection (in connection with the base element) Screw thread M3 Tightening torque 0.5 Nm Stripping length 8 mm Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section solid 0.2 mm² ... 4 mm² Conductor cross section AWG 24 ... 12 Standards and Regulations Standards/specifications IEC 61643-21 2000 + corrigendum 2001 + A1:2008, modified + A2:2012 EN 61643-21 2001 + A1:2009 + A2:2013 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 08/29/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Classifications eCl@ss eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 eCl@ss 9.0 27130807 ETIM ETIM 2.0 EC000943 ETIM 3.0 EC000943 ETIM 4.0 EC000943 ETIM 5.0 EC000943 ETIM 6.0 EC000943 ETIM 7.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals DNV GL / UL Listed / EAC / EAC Ex Approvals ATEX / UL Listed / cUL Listed / cULus Listed Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE00001N6 08/29/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Approvals UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 24 V Nominal current IN 0.45 A  FILE E 138168 EAC      EAC-Zulassung EAC      RU CDE.A*30.B01561 Accessories Accessories Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     Labeled terminal marker Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     08/29/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Accessories Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Terminal marking Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm     08/29/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Accessories Zack Marker strip, flat - ZBF 5/WH-100:UNBEDRUCKT - 0808668 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Necessary add-on products Surge protection base element - PT 1X2-BE - 2856113 Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.     Surge protection base element - PT 1X2+F-BE - 2856126 Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.     Additional products Shield connection - SSA 3-6 - 2839295 Shield fast connection for 3 ... 6 mm cable diameter. Potential connecting cable: 200 mm, 1 mm², color: black     08/29/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/2856032 Surge protection plug - PT 1X2-24DC-ST - 2856032 Accessories Shield connection - SSA 5-10 - 2839512 Shield fast connection for 5 ... 10 mm cable diameter. Potential connecting cable: 200 mm, 1 mm², color: black     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/29/2019   Page 9 / 9