2856100

https://www.phoenixcontact.com/us/products/2856100 Surge protection plug - PT 2X1-24AC-ST - 2856100 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection plug for the base element, coarse and fine protection for two signal wires with common reference potential, common mode voltage coarse protection to ground. Design: 24 V AC The illustration shows the version PT 2x1- 5 DC-ST Product Features ■ ■ ■ ■ ■ ■ ■ Plugs can be checked with CHECKMASTER Installed in conjunction with the PT 2x1...-BE base element Maximum ease of maintenance thanks to the two-piece design Base element remains an integral part of the installation Consistent plug-in signal circuit protection Protection for two conductors with common reference potential Impedance-neutral disconnection of plug for test and maintenance purposes Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 20.74 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 45 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. 04/28/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2856100 Surge protection plug - PT 2X1-24AC-ST - 2856100 Technical data Dimensions Complete module height 90 mm Complete module width 17.7 mm Complete module depth 65.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP20 General Housing material PA 6.6 Flammability rating according to UL 94 V-0 Color black Standards for cearances and creepage distances VDE 0110-1 IEC 60664-1 Mounting type On base element Type DIN rail module, two-section, divisible Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/ShieldEarth Ground Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.00 Protective circuit IEC test classification C1 C2 C3 D1 VDE requirement class C1 C2 C3 D1 Nominal voltage UN 24 V AC Maximum continuous voltage UC 40 V DC 28 V AC Maximum continuous voltage UC (wire-ground) 40 V DC 28 V AC Nominal current IN 300 mA (45°C) Operating effective current IC at UC ≤ 5 µA Residual current IPE ≤ 1 µA (BE: 2x1+F) ≤ 10 µA (Directly grounded) Nominal discharge current In (8/20) µs (Core-Earth) 10 kA 04/28/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2856100 Surge protection plug - PT 2X1-24AC-ST - 2856100 Technical data Protective circuit Total surge current (8/20) µs 20 kA Max. discharge current Imax (8/20) µs maximum (Core-Earth) 10 kA Nominal pulse current Ian (10/1000) µs (Core-Earth) 23 A Impulse discharge current (10/350)˽µs, peak value limp 2.5 kA (per path) Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 60 V Output voltage limitation at 1 kV/µs (Core-Earth) static ≤ 55 V Residual voltage at In (conductor-ground) ≤ 55 V Residual voltage with Ian (10/1000)µs (conductor-ground) ≤ 65 V (Directly grounded) Voltage protection level Up (core-ground) ≤ 100 V (C2 - 10 kV/5 kA) Response time tA (Core-Earth) ≤ 1 ns Input attenuation aE, asym. 0.5 dB (≤ 1.5 MHz) Cut-off frequency fg (3 dB), asym. (PE) in 50 Ohm system typ. 8 MHz Capacity (Core-Earth) 1.1 nF Resistance in series 4.7 Ω (1-2/5-6/7-8/11-12) Surge protection fault message None Max. required back-up fuse 315 mA (e.g. T ( IEC 127-2/III)) Impulse durability (conductor-ground) C2 - 10 kV/5 kA D1 - 2,5 kA Standards and Regulations Standards/regulations IEC 61643-21 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130807 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 eCl@ss 9.0 27130807 ETIM ETIM 2.0 EC000943 ETIM 3.0 EC000943 ETIM 4.0 EC000943 04/28/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2856100 Surge protection plug - PT 2X1-24AC-ST - 2856100 Classifications ETIM ETIM 5.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / EAC Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed      Nominal current IN 0.3 A Nominal voltage UN 34 V EAC  Drawings 04/28/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2856100 Surge protection plug - PT 2X1-24AC-ST - 2856100 Dimensional drawing Circuit diagram 90 44,8 7 8 11 12 OUT IN 65,5 9 10 4 51,5 3 * The figure shows the complete module consisting of a base element and connector Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/28/2016   Page 5 / 5