2858292

https://www.phoenixcontact.com/us/produkte/2858292 Type 2 surge protection connector - VAL-MS 120-UD-ST - 2858292 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 120 V AC     Key commercial data Packing unit 1 Minimum order quantity 1 Catalog page Page 36 (TT-2011) GTIN Custom tariff number 85363010 Country of origin GERMANY Technical data Standards Housing material PA 6.6-FR Inflammability class according to UL 94 V0 Color black Degree of protection IP20 Mounting type On base element Design DIN rail module, two-section, divisible Number of positions 1 Ambient temperature (operation) -40 °C ... 80 °C Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10 Message: Surge protection fault Optical Direction of action 1L-N/PE Width 17.7 mm Height 52.4 mm Depth 54.5 mm Pitch unit 1 Div. Protective circuit 04.10.2012   Page 1 / 4 https://www.phoenixcontact.com/us/produkte/2858292 Type 2 surge protection connector - VAL-MS 120-UD-ST - 2858292 Technical data Protective circuit IEC category II IEC category T2 EN type T2 Nominal voltage UN 120 V AC Arrester rated voltage UC 150 V Ground conductor current IPE ≤ 0.3 mA Max. discharge surge current Imax (8/20) µs 40 kA Nominal discharge surge current In (8/20) µs 20 kA Lightning test current (10/350) µs, peak value limp 4 kA (2 As) Max. energy absorption (2 ms) 360 J Protection level Up ≤ 800 V Residual voltage ≤ 550 V (at 5 kA) Residual voltage ≤ 800 V (at In) Residual voltage ≤ 550 V (at 3 kA) Response time ≤ 25 ns Max. required backup fuse with branch wiring 125 A (gL) Short-circuit resistance IP with max. backup fuse (effective) 25 kA Capacity 4.8 nF (typical) Connection, protective circuit Connection method FLASHTRAB/VALVETRAB plug-in system connector Remote indicator contact Standards Standards/regulations IEC 61643-1 2005 Standards/regulations NF C61-740 Classifications eclass eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130805 eCl@ss 7.0 27130805 etim ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 04.10.2012   Page 2 / 4 https://www.phoenixcontact.com/us/produkte/2858292 Type 2 surge protection connector - VAL-MS 120-UD-ST - 2858292 Classifications unspsc UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Recognized / KEMA-KEUR / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  KEMA-KEUR  cUL Recognized  GOST  cULus Recognized  04.10.2012   Page 3 / 4 https://www.phoenixcontact.com/us/produkte/2858292 Type 2 surge protection connector - VAL-MS 120-UD-ST - 2858292 Accessories Accessories Marking Zack marker strip - ZBN 18,LGS:ERDE - 2749589 Zack marker strip, Strip, white, Labeled, Horizontal: Grounding symbol, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Zack marker strip - ZBN 18,LGS:L1-N,ERDE - 2749576 Zack marker strip, Strip, white, Labeled, Horizontal: L1, L2, L3, N, GND, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 04.10.2012   Page 4 / 4