2859000

https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection plug for the base element, surge voltage coarse protection for two signal lines grounded on one side. Your advantages  Plugs can be checked with CHECKMASTER  For systems with high dielectric strength or fine protection installed  Maximum ease of maintenance thanks to the two-piece design  Installation location - directly where meas. and control cable enters building  Base element remains an integral part of the installation  Consistent plug-in signal circuit protection  Impedance-neutral disconnection of plug for test and maintenance purposes Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918902452 Weight per Piece (excluding packing) 19.790 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 45 mm Width 17.7 mm 09/08/2019   Page 1 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Technical data Dimensions Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm Complete module width 17.7 mm Complete module depth 65.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Degree of protection IP20 General Housing material PA 6.6 Flammability rating according to UL 94 V-0 Color jet black RAL 9005 Mounting type on base element Type Male Direction of action Line-Earth Ground Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10 Protective circuit IEC test classification C1 C2 C3 D1 Nominal voltage UN 48 V AC Maximum continuous voltage UC 60 V DC 48 V AC Rated current 2 A AC (80 °C) 150 mA DC (80 °C) Operating effective current IC at UC ≤ 2 µA Residual current IPE ≤ 4 µA Nominal discharge current In (8/20) µs (line-earth) 20 kA Pulse discharge current Iimp (10/350) µs (line-earth) 5 kA Total discharge current Itotal (8/20) µs 20 kA Output voltage limitation at 1 kV/µs (line-earth) spike ≤ 600 V Output voltage limitation at 1 kV/µs (line-earth) static ≤ 25 V Voltage protection level Up (line-earth) ≤ 600 V (C2 - 10 kV / 5 kA) 09/08/2019   Page 2 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Technical data Protective circuit Voltage protection level Up static (line-earth) ≤ 25 V (C2 - 10 kV / 5 kA) Response time tA (line-earth) ≤ 100 ns Input attenuation aE, asym. typ. 0.1 dB (≤ 1 MHz / 50 Ω) Cut-off frequency fg (3 dB), asym. (GND) in 50 Ohm system typ. 100 MHz Capacity (line-earth) typ. 2 pF Resistance in series 0Ω Surge protection fault message none Max. required back-up fuse 2 A AC (T) 150 mA DC (T) Impulse durability (line-earth) C2 - 10 kV / 5 kA C1 - 1 kV / 500 A C3 - 100 A D1 - 2.5 kA Connection data Connection method Screw connection (in connection with the base element) Screw thread M3 Tightening torque 0.5 Nm Stripping length 8 mm Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section solid 0.2 mm² ... 4 mm² Conductor cross section AWG 24 ... 12 Standards and Regulations Standards/specifications IEC 61643-21 2000 + corrigendum 2001 + A1:2008, modified + A2:2012 EN 61643-21 2001 + A1:2009 + A2:2013 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/08/2019   Page 3 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Dimensional drawing The figure shows the complete module consisting of a base element and connector Pictogram 09/08/2019   Page 4 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 eCl@ss 9.0 27130807 ETIM ETIM 2.0 EC001466 ETIM 3.0 EC001466 ETIM 4.0 EC000943 ETIM 5.0 EC000943 ETIM 6.0 EC000943 ETIM 7.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 09/08/2019   Page 5 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC      EAC-Zulassung EAC      RU CDE.A*30.B01561 Accessories Accessories Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     Labeled terminal marker Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     09/08/2019   Page 6 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Accessories Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Terminal marking Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm, Number of individual labels: 10     09/08/2019   Page 7 / 8 https://www.phoenixcontact.com/us/products/2859000 Surge protection plug - PT 2-F-ST - 2859000 Accessories Zack Marker strip, flat - ZBF 5/WH-100:UNBEDRUCKT - 0808668 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Necessary add-on products Type 3 surge protection base element - PT-BE/FM - 2839282 Base element for protective plug PT, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/08/2019   Page 8 / 8