2859479

https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact. Your advantages  With or without floating remote indication contact  Plugs can be checked with CHECKMASTER  High continuous voltage of 175 V AC for 120 V AC networks with high voltage fluctuations  Mechanical coding of all slots  Optical, mechanical status indication for the individual arresters  Disconnect device on each individual plug  Type 2 consistent plug-in surge arresters  Modular arrester blocks with ultra-narrow design  Use of varistors with a low leakage current Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356045476 Weight per Piece (excluding packing) 221.300 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions 09/05/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Technical data Dimensions Height 98 mm Width 25.3 mm Depth 71.5 mm Horizontal pitch 1.4 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General IEC test classification II T2 EN type T2 IEC power supply system TN-S TT Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color gray/blue black Housing material PBT-FR Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 2 Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 120 V AC (TN-S) 120 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-N) 175 V AC Maximum continuous operating voltage UC (L-PE) 175 V AC 09/05/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Technical data Protective circuit Maximum continuous voltage UC (N-PE) 150 V AC Rated load current IL 40 A (Biconnect M4 fork-type cable lug 6 mm²) 63 A (TWIN ferrule 2 x 10 mm²) Residual current IPE ≤ 1 µA Nominal discharge current In (8/20) µs (L-N) 20 kA Nominal discharge current In (8/20) µs (N-PE) 20 kA Maximum discharge current Imax (8/20) µs (L-N) 40 kA Maximum discharge current Imax (8/20) µs (N-PE) 40 kA Follow current interrupt rating Ifi (N-PE) 100 A (150 V AC) Short-circuit current rating ISCCR 25 kA Voltage protection level Up (L-N) ≤ 0.85 kV Voltage protection level Up (L-PE) ≤ 1.3 kV Voltage protection level Up (N-PE) ≤ 0.95 kV Residual voltage Ures (L-N) ≤ 0.85 kV (at In) ≤ 0.75 kV (at 10 kA) ≤ 0.65 kV (at 5 kA) ≤ 0.63 kV (at 4 kA) ≤ 0.57 kV (at 2 kA) Residual voltage Ures (N-PE) ≤ 0.4 kV (at In) ≤ 0.4 kV (at 10 kA) ≤ 0.4 kV (at 5 kA) ≤ 0.4 kV (at 4 kA) ≤ 0.4 kV (at 2 kA) TOV behavior at UT (L-N) 240 V AC (5 s / withstand mode) 240 V AC (120 min / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode) Response time tA (L-N) ≤ 25 ns Response time tA (N-PE) ≤ 100 ns Max. backup fuse with V-type through wiring 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) 63 A (gG / TWIN ferrule 2x 10mm²) Max. backup fuse with branch wiring 315 A (gG) Indicator/remote signaling Switching function PDT contact Operating voltage 5 V AC ... 250 V AC 125 V DC (200 mA DC) Operating current 5 mA AC ... 1 A AC 09/05/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Technical data Indicator/remote signaling 1 A DC (30 V DC) Connection method Pluggable screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 28 ... 16 Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm Conductor cross section flexible 2.5 mm² ... 16 mm² Conductor cross section solid 2.5 mm² ... 25 mm² Conductor cross section AWG 12 ... 4 UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-N) 175 V AC Maximum continuous operating voltage MCOV (L-G) 175 V AC Maximum continuous operating voltage MCOV (N-G) 150 V AC Nom. voltage 120 V AC Mode of protection L-N L-G N-G Power distribution system Single phase Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-N) 1510 V Measured limiting voltage MLV (L-G) 1630 V Measured limiting voltage MLV (N-G) 560 V Nominal discharge current In (L-N) 20 kA Nominal discharge current In (L-G) 20 kA Nominal discharge current In (N-G) 20 kA Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 09/05/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram 09/05/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130805 eCl@ss 8.0 27130805 eCl@ss 9.0 27130805 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 09/05/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Classifications ETIM ETIM 6.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Accessories Accessories Bridge Wiring bridge - MPB SET VAL-CP-3S - 2880684 Wiring bridge set, consisting of three flexible bridges 15 cm black, 1 bridge 27 cm blue.     Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     Feed-through terminal block Feed-through terminal block - DK-BIC-35 - 2749880 Feed-through terminal block for VAL and FLT applications     09/05/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Accessories Labeled device marker Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589 Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Spare parts Type 2 surge protection plug - VAL-CP-175-ST - 2859628 Replacement plug for VAL-CP surge protective device with high-capacity varistor with a low leakage current.     09/05/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/2859479 Type 2 surge arrester - VAL-CP-1S-175 - 2859479 Accessories Type 2 surge protection plug - VAL-CP-N/PE-175-ST - 2859709 Replacement plug for VAL-CP surge arrester with N-PE spark gap.     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/05/2019   Page 9 / 9