2859482

https://www.phoenixcontact.com/us/products/2859482 Type 2 surge arrester - VAL-CP-2C-175 - 2859482 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in surge arrester for 2-phase power supply networks with N and PE in a common conductor (3-conductor system: L1, L2, PEN), with remote indication contact. Product Features ■ ■ ■ ■ ■ ■ ■ ■ ■ With or without floating remote indication contact Plugs can be checked with CHECKMASTER High continuous voltage of 175 V AC for 120/208 V AC networks with high voltage fluctuations Mechanical coding of all slots Optical, mechanical status indication for the individual arresters Disconnect device on each individual plug Type 2 consistent plug-in surge arresters Modular arrester blocks with ultra-narrow design Use of varistors that are free of leakage current Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 210.7 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Height 98 mm Width 25.3 mm Depth 71.5 mm 04/19/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2859482 Type 2 surge arrester - VAL-CP-2C-175 - 2859482 Technical data Dimensions Horizontal pitch 1.4 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (half sinus / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General Standards/specifications IEC 61643-11 2011 EN 61643-11 2012 IEC test classification II T2 EN type T2 IEC power supply system TN-C Number of ports One SPD design Voltage-limiting type Mode of protection L-PEN Mounting type DIN rail: 35 mm Color gray/blue black Housing material PBT-FR Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 2 Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 120/208 V AC (TN-C) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-PEN) 175 V AC Rated load current IL 40 A (Biconnect M4 fork-type cable lug 6 mm²) 63 A (TWIN ferrule 2 x 10 mm²) Nominal discharge current In (8/20) µs (L-PEN) 20 kA Maximum discharge current Imax (8/20) µs (L-PEN) 40 kA 04/19/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2859482 Type 2 surge arrester - VAL-CP-2C-175 - 2859482 Technical data Protective circuit Short-circuit current rating ISCCR 25 kA Voltage protection level Up (L-PEN) ≤ 0.85 kV Residual voltage Ures (L-PEN) ≤ 0.85 kV (at In) ≤ 0.75 kV (at 10 kA) ≤ 0.65 kV (at 5 kA) ≤ 0.63 kV (at 4 kA) ≤ 0.57 kV (at 2 kA) TOV behavior at UT (L-PEN) 240 V AC (5 s / withstand mode) 240 V AC (120 min / safe failure mode) Response time tA (L-PEN) ≤ 25 ns Max. backup fuse with branch wiring 315 A (gG) Max. backup fuse with V-type through wiring 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) 63 A (gG / TWIN ferrule 2x 10mm²) Indicator/remote signaling Connection name Remote fault indicator contact Switching function PDT contact Operating voltage 5 V AC ... 250 V AC 125 V DC (200 mA DC) Operating current 5 mA AC ... 1 A AC 1 A DC (30 V DC) Connection method Pluggable screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible 0.14 mm² ... 1.5 mm² Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section AWG 28 ... 16 Connection data Connection method Screw connection Conductor cross section flexible 2.5 mm² ... 16 mm² Conductor cross section solid 2.5 mm² ... 25 mm² Conductor cross section AWG 12 ... 4 Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm UL specifications 04/19/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2859482 Type 2 surge arrester - VAL-CP-2C-175 - 2859482 Technical data UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-L) 350 V AC Maximum continuous operating voltage MCOV (L-N) 175 V AC Nom. voltage 120/240 V AC Mode of protection L-L L-N Power distribution system 1S Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-L) 2010 V Measured limiting voltage MLV (L-N) 1510 V Nominal discharge current In (L-L) 20 kA Nominal discharge current In (L-N) 20 kA Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130805 eCl@ss 7.0 27130805 eCl@ss 8.0 27130805 eCl@ss 9.0 27130805 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 04/19/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2859482 Type 2 surge arrester - VAL-CP-2C-175 - 2859482 Approvals Approvals Approvals UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / CCA / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  KEMA-KEUR  cUL Recognized  IECEE CB Scheme  CCA  EAC  cULus Recognized  Drawings 04/19/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2859482 Type 2 surge arrester - VAL-CP-2C-175 - 2859482 Dimensional drawing Circuit diagram PEN 98 22,5 11 14 FM 64 51,5 71,5 45 12 L1 L2 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/19/2016   Page 6 / 6